Electromagnetic wave characteristics of composite frequency selective surfaces with patch‐grid‐patch type structure fabricated by e‐beam deposition

2019 ◽  
Vol 41 (3) ◽  
pp. 1100-1105 ◽  
Author(s):  
Jinyul Kim ◽  
Choonghyun Kang ◽  
Sungnam Hong
Keyword(s):  
Electromagnetic Wave ◽  
Type Structure ◽  
Frequency Selective Surfaces ◽  
Patch Type ◽  
Wave Characteristics ◽  
Frequency Selective ◽  
Beam Deposition

scholarly journals Design of Ultrawide Bandwidth Electromagnetic Wave Absorbers with Square Patch Frequency Selective Surfaces with Different Geometries

2020 ◽  
Vol 58 (5) ◽  
pp. 326-333
Author(s):  
Tian Liu ◽  
Sung-Soo Kim
Keyword(s):  
Electromagnetic Wave ◽  
Free Space ◽  
Impedance Matching ◽  
Test Sample ◽  
Dielectric Substrate ◽  
Frequency Selective Surfaces ◽  
Total Thickness ◽  
Wide Bandwidth ◽  
Wire Conductor ◽  
Frequency Selective

A reliable and efficient numerical method is presented for the design of broadband absorbers, fabricated by layering two square patch-frequency selective surfaces (SP-FSS) with different geometries on a grounded dielectric substrate. The circuit parameters of the inductance and capacitance of the SP-FSS were retrieved using the strip wire conductor model. Due to the high capacitance and low inductance of the SPFSS, a nearly constant resonance frequency (<i>f</i><sub>0</sub> = 37 GHz) is observed, irrespective of patch size at a given unit cell periodicity of 7.5 mm. For the SP-FSS, the circuit is capacitive below <i>f</i><sub>0</sub> and inductive above <i>f</i><sub>0</sub>. For a grounded substrate with a quarter wavelength thickness, however, the input impedance is inductive below <i>f</i><sub>0</sub>, resulting in impedance matching over a wide frequency range, with the controlled FSS resistance matched to the free-space impedance. The double-layer absorber was designed by optimizing the surface resistance and layer thickness of two SP-FSSs with different geometries, and demonstrated a 10 dB absorption bandwidth of 6.1−41.4 GHz with a total thickness of 5 mm, which is equal to the theoretical limit. A test sample was prepared by screen printing method, and the free space measurement demonstrated a wide-bandwidth absorption result (4.7−40.0 GHz for −10 dB reflection loss) with a small total thickness (5.4 mm). The simulation and experimental results strongly validated the SP-FSS for the design of wide bandwidth electromagnetic wave absorbers.

Nonuniformly illuminated frequency-selective surfaces

1988 ◽  
Vol 24 (14) ◽  
pp. 901 ◽  
Author(s):  
A.M.M.A. Allam ◽  
E.A. Parker
Keyword(s):  
Frequency Selective Surfaces ◽  
Frequency Selective
Sign in / Sign up

Export Citation Format

Share Document