Kinetic of thermal degradation and thermal stability of natural rubber filled with titanium dioxide nanoparticles

2018 ◽  
Vol 40 (8) ◽  
pp. 3149-3155 ◽  
Author(s):  
Nabil Hayeemasae ◽  
Hanafi Ismail ◽  
Suradet Matchawet ◽  
Abdulhakim Masa
Keyword(s):  
Thermal Stability ◽  
Titanium Dioxide ◽  
Thermal Degradation ◽  
Natural Rubber ◽  
Titanium Dioxide Nanoparticles ◽  
Thermal Stability Of

Flammability and Thermal Degradation of Polystyrene/Cadmium Sulfate Nanocomposites

2013 ◽  
Vol 820 ◽  
pp. 84-87
Author(s):  
Zheng Zhou Wang ◽  
Charles A. Wilkie
Keyword(s):  
Thermal Stability ◽  
Thermal Degradation ◽  
Cone Calorimeter ◽  
Cds Nanoparticles ◽  
Solvothermal Process ◽  
Cadmium Sulfate ◽  
Peak Heat Release Rate ◽  
Microscale Combustion Calorimeter ◽  
Combustion Calorimeter ◽  
Thermal Stability Of

Cadmin sulfate nanoparticles, hollow sphere (CdS-HS) and rode (CdS-NR) were synthesized by ultrasonic and solvothermal process, respectively. The effect of the two kinds of nanoparticles on flammability of polystyrene was investigated using cone calorimeter (Cone) and microscale combustion calorimeter (MCC). Cone data indicate that the incorporation of 1% CdS nanoparticles leads to a about 20% reduction in the peak heat release rate (PHRR) compared to the pure PS; CdS-NR is more efficient in reducing the PHRR proved by both Cone and MCC results. The TG results show that the addition of the nanoparticles mainly increases thermal stability of PS at high temepratures.

Synthesis of Titanium Dioxide Nanoparticles in Natural Rubber Latex Medium

2014 ◽  
Vol 1024 ◽  
pp. 108-111 ◽  
Author(s):  
Kim Song Tan
Keyword(s):  
Titanium Dioxide ◽  
Natural Rubber ◽  
Titanium Dioxide Nanoparticles ◽  
Natural Rubber Latex ◽  
Weight Fraction ◽  
Reaction Vessel ◽  
Tetramethylammonium Hydroxide ◽  
Titanium Tetraisopropoxide ◽  
Rubber Latex ◽  
Shape And Size

The feasibility of synthesizing TiO2 nanoparticles using tetramethylammonium hydroxide (TMAOH) stabilized titanium tetraisopropoxide (TTIP) in natural rubber latex medium was investigated. The TiO2 nanoparticles were separated using centrifugation and were characterized using SEM, TEM and XRD. It was found that the weight fraction of latex loaded in the reaction vessel affects the shape and size of the TiO2 particles

scholarly journals The Use of POSS-Based Nanoadditives for Cable-Grade PVC: Effects on its Thermal Stability

Polymers ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1105 ◽  
Author(s):  
Palin ◽  
Rombolà ◽  
Milanesio ◽  
Boccaleri
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Thermogravimetric Analysis ◽  
Thermal Degradation ◽  
Additive Effects ◽  
Poly Vinyl Chloride ◽  
The Family ◽  
Mechanical Performances ◽  
Oligomeric Silsesquioxane ◽  
Thermal Stability Of

Plasticized–Poly(vinyl chloride) (P-PVC) for cables and insulation requires performances related to outdoor, indoor and submarine contexts and reduction of noxious release of HCl-containing fumes in case of thermal degradation or fire. Introducing suitable nanomaterials in polymer-based nanocomposites can be an answer to this clue. In this work, an industry-compliant cable-grade P-PVC formulation was added with nanostructured materials belonging to the family of Polyhedral Oligomeric Silsesquioxane (POSS). The effects of the nanomaterials, alone and in synergy with HCl scavenging agents as zeolites and hydrotalcites, on the thermal stability and HCl evolution of P-PVC were deeply investigated by thermogravimetric analysis and reference ASTM methods. Moreover, hardness and mechanical properties were studied in order to highlight the effects of these additives in the perspective of final industrial uses. The data demonstrated relevant improvements in the thermal stability of the samples added with nanomaterials, already with concentrations of POSS down to 0.31 phr and interesting additive effects of POSS with zeolites and hydrotalcites for HCl release reduction without losing mechanical performances.

Effect of Phenylene Diamine Antioxidant on Physico-Chemical Properties of Methyl Grafted Natural Rubber Polymer Electrolytes

2017 ◽  
Vol 864 ◽  
pp. 48-53
Author(s):  
Ahmad Fairoz Aziz ◽  
Khuzaimah Nazir ◽  
S.F. Ayub ◽  
N.I. Adam ◽  
Muhd Zu Azhan Yahya ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Natural Rubber ◽  
Polymer Electrolytes ◽  
Chemical Properties ◽  
Physico Chemical ◽  
Solution Cast ◽  
Deconvolution Techniques ◽  
Tga And Dsc ◽  
Thermal Stability Of ◽  
Aging Factor

0.5 wt.% of N-(1,3-dimethylbutyl)-N’-phenyl-p-phenylenediamine (6PPD) was introduced into polymer electrolytes based on 30% poly(methyl-methacrylate) grafted natural rubber (MG30) in order to reduce the aging factor of MG30. The polymer electrolyte without 6PPD was used as control. All samples were prepared by using solution cast techniques. The effect of 6PPD in the electrolytes was analysed by using TGA, DSC and FTIR. TGA and DSC results revealed the thermal stability of MG30 electrolytes with 6PPD have higher thermal stability but lower glass transition temperature value. FTIR studies confirmed the existence of LiTF in the sample and prove the occurrence of polymer-salt complexation. Deconvolution techniques analysis on FTIR spectra shows the electrolyte sample with 6PPD display more ion dissociation which reflects to higher ionic conductivity.

scholarly journals Development of Novel Silica-Based Formulation of α-Lipoic Acid: Evaluation of Photo and Thermal Stability of the Encapsulated Drug

Pharmaceutics ◽  
2020 ◽  
Vol 12 (3) ◽  
pp. 228 ◽  
Author(s):  
Ekaterina S. Dolinina ◽  
Elizaveta Yu. Akimsheva ◽  
Elena V. Parfenyuk
Keyword(s):  
Thermal Stability ◽  
Thermal Degradation ◽  
Lipoic Acid ◽  
Sol Gel ◽  
Silica Matrix ◽  
Matrix Modification ◽  
Drug Stabilization ◽  
Further Development ◽  
Kinetics Of ◽  
Thermal Stability Of

Powerful antioxidant α-lipoic acid (LA) is easily degraded under light and heating. This creates difficulties in its manufacture, storage and reduces efficiency and safety of the drug. The purpose of this work was to synthesize novel silica-based composites of LA and evaluate their ability to increase photo and thermal stability of the drug. It was assumed that the drug stabilization can be achieved due to LA-silica interactions. Therefore, the composites of LA with unmodified and organomodified silica matrixes were synthesized by sol-gel method at the synthesis pH below or above the pKa of the drug. The effects of silica matrix modification and the synthesis pH on the LA-silica interactions and kinetics of photo and thermal degradation of LA in the composites were studied. The nature of the interactions was revealed by FTIR spectroscopy. It was found that the rate of thermal degradation of the drug in the composites was significantly lower compared to free LA and mainly determined by the LA-silica interactions. However, photodegradation of LA in the composites under UV irradiation was either close to that for free drug or significantly more rapid. It was shown that kinetics of photodegradation was independent of the interactions and likely determined by physical properties of surface of the composite particles (porosity and reflectivity). The most promising composites for further development of novel silica-based formulations were identified.

scholarly journals Effects of aluminum sulfate soaking pretreatment on dimensional stability and thermostability of heat-treated wood

2020 ◽  
Author(s):  
Lijie Qu ◽  
Zhenyu Wang ◽  
Jing Qian ◽  
Zhengbin He ◽  
Songlin Yi
Keyword(s):  
Heat Treatment ◽  
Thermal Stability ◽  
Thermal Degradation ◽  
Structural Changes ◽  
Aluminum Sulfate ◽  
Treated Wood ◽  
Treatment Temperature ◽  
Chinese Fir ◽  
Heat Treated ◽  
Thermal Stability Of

Abstract Acidic aluminum sulfate hydrolysis solutions can be used to catalyze the thermal degradation of wood in a mild temperature environment, and thus reduce the temperature required for heat treatment process. To improve the dimensional and thermal stability of Chinese fir during heat treatment at 120 °C, 140 °C and 160 °C, this study investigated the effects of soaking pretreatment with 5%, 10% and 15% aluminum sulfate on the chemical and structural changes of the heat-treated Chinese fir. The results indicated that the samples treated at 15% aluminum sulfate concentration and 160 °C heat treatment achieved the best dimensional and thermal stability. Chemical analyses by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) indicated that the catalysis of aluminum sulfate resulted in degradation of hemicelluloses during the heat treatment, and an increase in the soaking concentration and heat treatment temperature also affected the thermal degradation of celluloses. The scanning electron microscope (SEM) and mass changes test results proved that the hydrolyzed aluminum flocs mainly adhered to the inner wall of the wood tracheid as spherical precipitates, and when the soaking concentration reached 10% and 15%, a uniform soaking effect could be achieved. The thermogravimetric (TG) analysis revealed the soaking pretreatment effectively improved the thermal stability of the heat-treated wood by physically wrapping and promoting the formation of a carbon layer on the wood surface during heat treatment. Thus, aluminum sulfate soaking pretreatment exerted a great effect on the dimensional and thermal stability of wood, allowing heat treatment to be performed at a lower temperature.

scholarly journals Thermal degradation and stability of wood particle composites deployed as decorative components

2018 ◽  
Vol 184 ◽  
pp. 01016 ◽  
Author(s):  
Dana Luca Motoc ◽  
Santiago Ferrándiz Bou ◽  
Adrian Petru Pop
Keyword(s):  
Thermal Stability ◽  
Thermal Degradation ◽  
Wood Particle ◽  
Weight Fraction ◽  
Content Increase ◽  
Thermoplastic Matrix ◽  
Char Formation ◽  
Wood Polymer ◽  
Wood Content ◽  
Thermal Stability Of

The contribution aims to design, deliver and debate on thermal degradation and thermal stability of several wood/PP composite materials. The wood polymer-based composites (n. WPCs) were manufactured through injection moulding by deploying various wood species under 10% and 40% weight fraction within the thermoplastic matrix. Thermal degradation of WPC specimens revealed similarities in characteristics, small discrepancies in the degradation temperatures but higher contents in the char formation, between 10% to 35% with wood content increase.

Sign in / Sign up

Export Citation Format

Share Document