Effects of graphite and boron nitride based fillers on mechanical, thermal conductive, and thermo‐physical properties in solution styrene–butadiene rubber

2018 ◽  
Vol 40 (S2) ◽  
pp. E1426-E1433 ◽  
Author(s):  
Yuan Fan ◽  
Ur Ryong Cho
Keyword(s):  
Boron Nitride ◽  
Physical Properties ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Styrene Butadiene ◽  
Thermo Physical Properties

scholarly journals The Effect of Vulcanization Accelerator on the Properties of Porous Rubber

2021 ◽  
pp. 215-221
Author(s):  
Kymbat S. Zhansakova ◽  
Gregory S. Russkikh ◽  
Evgeny N. Eremin
Keyword(s):  
Thermal Conductivity ◽  
Physical Properties ◽  
Apparent Density ◽  
Molecular Mobility ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Maximum Torque ◽  
Styrene Butadiene ◽  
Vulcanization Accelerator ◽  
Thermo Physical Properties

This work is devoted to identifying the patterns of influence of the vulcanization accelerator N-cyclohexyl-benzothiazyl-sulfenamide (CBS) on the technological, physico-mechanical, and thermo-physical properties of vulcanizates based on styrene-butadiene rubber. It was found that a decrease in the content of the vulcanization accelerator decreases the maximum torque, and a noticeably longer time is required for optimum vulcanization in the absence of CBS. The thermal conductivity in vulcanizates increases with a decrease in the accelerator concentration due to changes in the structure and molecular mobility of kinetic units. Physico-mechanical indicators increase with a decrease in the concentration of CBS, this is due to a decrease in the apparent density of porous rubbers

The Structure of Gels. IX. Effects of Plasticizers on the Physical Properties of Styrene Butadiene Rubber

1959 ◽  
Vol 32 (2) ◽  
pp. 536-538
Author(s):  
M. P. Zverev ◽  
P. I. Zubov
Keyword(s):  
Molecular Structure ◽  
Physical Properties ◽  
Intramolecular Interaction ◽  
Styrene Butadiene Rubber ◽  
Flow Transition ◽  
Butadiene Rubber ◽  
Transition Temperatures ◽  
Relative Extension ◽  
Styrene Butadiene

Abstract 1. The glass and flow temperatures and the strength and relative extension of rubber depend not only on the concentration of the plasticizer but also on its molecular structure. 2. Styrene butadiene rubber plasticized with nonpolar plasticizers has higher glass and flow transition temperatures than rubber plasticized with polar substances. The same relationships are found for the strength and relative extension of vulcanizates of this rubber. 3. Nonpolar plasticizers also weaken intramolecular interaction to a greater extent than polar plasticizers.

Some studies on the effect of bagasse concentration on the mechanical and physical properties of SBR composites

2020 ◽  
Vol 28 (8-9) ◽  
pp. 663-677
Author(s):  
ESA Khalaf ◽  
H Farag ◽  
EM Abdel-Bary
Keyword(s):  
Mechanical Properties ◽  
Physical Properties ◽  
Agricultural Waste ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
The Road ◽  
Reinforcing Fillers ◽  
Mechanical And Physical Properties ◽  
Grinding Machine ◽  
Styrene Butadiene

This work aims to avoid pollution of the environment resulting from ashes accumulated due to the burning of agricultural wastes. Also, it aims to reduce the cost without impairing the mechanical properties of rubber vulcanizates. For this reason, this work was carried out as a possible solution by incorporation of cellulose fibers derived from bagasse waste as reinforcing fillers in rubber composites. Besides, it aims at reporting an investigation on a series of mixtures based on natural ground bagasse powder (GBP) and carbon black (CB) as reinforcing fillers to study their effects on the mechanical and physical properties of styrene butadiene rubber (SBR) composites. The GBP obtained from the grinding machine has a selective grain size distribution ranging from about 20 µm to 180 µm. In addition, 2.5 phr of added maleic anhydride was used to improve the interfacial adhesion between SBR and agricultural waste fillers (i.e. bagasse). Tensile strength, elongation at break, modulus at 100% elongation, resilience and hardness (Shore A), degree of swelling, and thermal properties of the rubber vulcanizates were studied. The prepared samples were also analyzed by X-ray diffractometer and scanning electron microscopy. The advantage of choosing the 25 phr bagasse concentration as a pivoting factor makes the road clearer to investigate that the optimum concentration of bagasse to be used simultaneously with CB in SBR composites is 30 phr. Furthermore, it was found from the obtained results that the addition of GBP up to 50 phr is possible without impairing the mechanical properties of SBR vulcanizates.

The Effects on the Cure Characteristics and Physical Properties of Bamboo Activated Carbon Filled Styrene Butadiene Rubber (SBR) Compounds

2015 ◽  
Vol 815 ◽  
pp. 24-28
Author(s):  
N.R. Munirah ◽  
N.Z. Noriman ◽  
M.Z. Salihin ◽  
H. Kamarudin ◽  
M.H. Fatin ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Physical Properties ◽  
Filler Loading ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Cure Characteristics ◽  
Rubber Compounds ◽  
Roll Mill ◽  
Cure Time ◽  
Styrene Butadiene

The role of activated carbon (AC) in rubber compounds was investigated to better understand the reinforcing mechanism. The activated carbon filled styrene butadiene rubber vulcanizates (SBR-AC) using bamboo activated carbon as filler were prepared by using two-roll mill and cured at 160 °C. AC filler loading from 10 to 50 phr (part per hundred rubber) were used in this study. Study into the influences of filler loading on the cure characteristics, swelling behaviour and physical properties (hardness and resilience) of SBR-AC vulcanizates were carried out. It was observed that SBR-AC vulcanizates has better cure characteristics compared to the styrene butadiene rubber gum vulcanizate (SBR-GV) which is a non-filled vulcanizate. The results showed that the scorch time (ts2) decreased with increasing filler loading. The cure time (tc90) slightly decreased up to 20 phr before a rise as the filler loading increased. The minimum torque (ML) of SBR vulcanizate increased and the maximum torque (MH) decreased up to 20 phr but then increased with increasing filler loading. The cure rate index (CRI) of SBR-GV vulcanizate was higher than that of all SBR-AC vulcanizates. Up to 20 phr of filler loading, the CRI increased before a decline occurred as the filler loading increased. As expected, the hardness value of SBR-AC vulcanizates was higher compared to SBR-GV vulcanizate which has lower resilience. The hardness and crosslink density showed an increasing trend meanwhile the resilience was adversely affected by the increase in filler loading. Bamboo activated carbon showed some potential enhancement on the reinforcing and physical properties of the vulcanizates.

Sign in / Sign up

Export Citation Format

Share Document