Effects of oxidized/treated non-metallic fillers obtained from waste printed circuit boards on mechanical properties and shrinkage of unsaturated polyester-based composites

2018 ◽  
Vol 40 (3) ◽  
pp. 1170-1186 ◽  
Author(s):  
Tihomir Kovačević ◽  
Jelena Rusmirović ◽  
Nataša Tomić ◽  
Goran Mladenović ◽  
Miloš Milošević ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Printed Circuit Boards ◽  
Unsaturated Polyester ◽  
Circuit Boards ◽  
Printed Circuit ◽  
Waste Printed Circuit Boards

Experimental Study on Impact Mechanical Properties of Waste Printed Circuit Boards

2010 ◽  
Vol 113-116 ◽  
pp. 1123-1127
Author(s):  
Nian Xin Zhou ◽  
Ya Qun He ◽  
Chen Long Duan ◽  
Shu Ai Wang
Keyword(s):  
Mechanical Properties ◽  
Printed Circuit Boards ◽  
Impact Load ◽  
Circuit Board ◽  
Circuit Boards ◽  
X Ray ◽  
Printed Circuit ◽  
Waste Printed Circuit Boards ◽  
The Impact ◽  
Scanning Electron

Comminution is a key part of the reutilization of discarded circuit board. In order to find out the most appropriate method of crushing, the characteristics of the materials and the mechanical properties of resistance impact of discarded circuit boards were studied. The substrate of circuit boards, slots of ISA and PCI were adopted as the specimen. The scanning electron microscope (SEM) and energy disperse X-ray spectroscopy (EDX) were used to characterize and analyze the combined state of the fracturing materials on the specimen surfaces after comminution. Results showed that the metals and nonmetals in the slots were crushed and dissociated easily.At the same time, the metal and nonmetal combined interfaces in the substrate have a trend to be broken and separated under the impact effect, which means the crushing circuit board has a favorable break effect under impact load.

LEACHING OF METALS FROM WASTE PRINTED CIRCUIT BOARDS (WPCBs) USING SULFURIC AND NITRIC ACIDS

2014 ◽  
Vol 13 (10) ◽  
pp. 2601-2607 ◽  
Author(s):  
Jae-chun Lee ◽  
Manoj Kumar ◽  
Min-Seuk Kim ◽  
Jinki Jeong ◽  
Kyoungkeun Yoo
Keyword(s):  
Printed Circuit Boards ◽  
Circuit Boards ◽  
Printed Circuit ◽  
Waste Printed Circuit Boards

scholarly journals Effective Recovery Process of Copper from Waste Printed Circuit Boards Utilizing Recycling of Leachate

JOM ◽  
2020 ◽  
Author(s):  
Joona Rajahalme ◽  
Siiri Perämäki ◽  
Roshan Budhathoki ◽  
Ari Väisänen
Keyword(s):  
Hydrogen Peroxide ◽  
Sulfuric Acid ◽  
Printed Circuit Boards ◽  
Sulfuric Acid Concentration ◽  
Recovery Process ◽  
Copper Recovery ◽  
Circuit Boards ◽  
Printed Circuit ◽  
Waste Printed Circuit Boards ◽  
Acid Consumption

AbstractThis study presents an optimized leaching and electrowinning process for the recovery of copper from waste printed circuit boards including studies of chemical consumption and recirculation of leachate. Optimization of leaching was performed using response surface methodology in diluted sulfuric acid and hydrogen peroxide media. Optimum leaching conditions for copper were found by using 3.6 mol L−1 sulfuric acid, 6 vol.% hydrogen peroxide, pulp density of 75 g L−1 with 186 min leaching time at 20°C resulting in complete leaching of copper followed by over 92% recovery and purity of 99.9% in the electrowinning. Study of chemical consumption showed total decomposition of hydrogen peroxide during leaching, while changes in sulfuric acid concentration were minor. During recirculation of the leachate with up to 5 cycles, copper recovery and product purity remained at high levels while acid consumption was reduced by 60%.

scholarly journals Food Waste-Assisted Metal Extraction from Printed Circuit Boards: The Aspergillus niger Route

2021 ◽  
Vol 9 (5) ◽  
pp. 895
Author(s):  
Carlotta Alias ◽  
Daniela Bulgari ◽  
Fabjola Bilo ◽  
Laura Borgese ◽  
Alessandra Gianoncelli ◽  
...  
Keyword(s):  
Solid State ◽  
Aspergillus Niger ◽  
Food Waste ◽  
Solid State Fermentation ◽  
Printed Circuit Boards ◽  
Electronic Waste ◽  
Metal Extraction ◽  
Circuit Boards ◽  
Printed Circuit ◽  
Waste Printed Circuit Boards

A low-energy paradigm was adopted for sustainable, affordable, and effective urban waste valorization. Here a new, eco-designed, solid-state fermentation process is presented to obtain some useful bio-products by recycling of different wastes. Urban food waste and scraps from trimmings were used as a substrate for the production of citric acid (CA) by solid state fermentation of Aspergillus niger NRRL 334, with a yield of 20.50 mg of CA per gram of substrate. The acid solution was used to extract metals from waste printed circuit boards (WPCBs), one of the most common electronic waste. The leaching activity of the biological solution is comparable to a commercial CA one. Sn and Fe were the most leached metals (404.09 and 67.99 mg/L, respectively), followed by Ni and Zn (4.55 and 1.92 mg/L) without any pre-treatments as usually performed. Commercial CA extracted Fe more efficiently than the organic one (123.46 vs. 67.99 mg/L); vice versa, biological organic CA recovered Ni better than commercial CA (4.55 vs. 1.54 mg/L). This is the first approach that allows the extraction of metals from WPCBs through CA produced by A. niger directly grown on waste material without any sugar supplement. This “green” process could be an alternative for the recovery of valuable metals such as Fe, Pb, and Ni from electronic waste.

Physical pre-concentration and ammonium leaching of metal copper from waste printed circuit boards

2021 ◽  
pp. 128512
Author(s):  
Shun-xiang Shi ◽  
Chun-chen Nie ◽  
Hong-hao Chang ◽  
Peng Wu ◽  
Zheng-jie Piao ◽  
...  
Keyword(s):  
Printed Circuit Boards ◽  
Circuit Boards ◽  
Printed Circuit ◽  
Waste Printed Circuit Boards
Sign in / Sign up

Export Citation Format

Share Document