High-performance EMI shielding materials based on short carbon fiber-filled ethylene vinyl acetate copolymer, acrylonitrile butadiene copolymer, and their blends

2011 ◽  
Vol 32 (11) ◽  
pp. 1790-1805 ◽  
Author(s):  
Mostafizur Rahaman ◽  
Tapan Kumar Chaki ◽  
Dipak Khastgir
Keyword(s):  
Carbon Fiber ◽  
Vinyl Acetate ◽  
High Performance ◽  
Ethylene Vinyl Acetate ◽  
Emi Shielding ◽  
Short Carbon Fiber ◽  
Short Carbon ◽  
Acetate Copolymer ◽  
Ethylene Vinyl Acetate Copolymer

scholarly journals INFLUENCE OF CARBON FIBER ON THE COMBUSTION BEHAVIOR, THERMAL STABILITY AND MECHANICAL PROPERTIES OF ETHYLENE-VINYL ACETATE COPOLYMER (EVA) AND 9,10-DIHYDRO-9-OXA-10-PHOSPHAPHENANTHRENE-10-OXIDE (DOPO) COMPOSITES

10.6036/10031 ◽  
2021 ◽  
Vol 96 (3) ◽  
pp. 302-308
Author(s):  
XIAN WANG ◽  
JUNYI DAI ◽  
TIANQING XING ◽  
JINLONG ZHUO
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Thermogravimetric Analysis ◽  
Carbon Fiber ◽  
Heat Release ◽  
Vinyl Acetate ◽  
Flame Retardancy ◽  
Ethylene Vinyl Acetate ◽  
Acetate Copolymer ◽  
Ethylene Vinyl Acetate Copolymer

Ethylene-vinyl acetate copolymer (EVA) is widely used due to its good processability, low density, and low temperature resistance. However, it burns easily and has several disadvantages, such as a high heat release rate and melt dripping, and it emits large amounts of smog and toxic harmful gases. These disadvantages greatly limit the application of EVA in the wire and cable field. In this study, a series of carbon fiber (CF)/9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO)/EVA composites are prepared through melt compounding to improve the flame retardancy and mechanical properties of EVA. The flame retardancy, thermal stability, and mechanical properties of the composites are studied through microscale combustion calorimeter experiments, cone calorimeter tests, thermogravimetric analysis, digital camera, and tensile measurements. Results indicate that among the six samples, the EVA-5 composite with 4.0 wt% CF, 16.0 wt% DOPO, and 80 wt% EVA has the highest limiting oxygen index value (25.1%) and reaches the V-1 level of the Underwriters Laboratory-94 test. Compare with that of pure EVA, the peak heat release rate of the EVA-5 composite has reduced by 30.2% and 47.7%. In addition, the total heat release of EVA-5 reduces by 17.0% and 34.8% relative to that of pure EVA. Data of thermogravimetric analysis show that the thermal stability of CF/DOPO/EVA improves with the increase in CF loading. Moreover, the tensile strength and elongation-at-break values of EVA-5 are 14.30 MPa and 1142.87%, respectively, indicating that this material can maintain good mechanical properties. CF not only enhances the tensile properties of EVA but also acts as a skeleton during burning. This action could increase the strength of the carbon layer and enhance the flame-retardant effect of DOPO. CF and DOPO have an enhanced synergistic effect that could improve the flame retardancy, thermal stability, and mechanical properties of EVA composites. This work provides a theoretical basis for the preparation and production of CF/DOPO/EVA composites with good comprehensive performance. Keywords: thylene-vinyl acetate copolymer; 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide; carbon fiber; flame retardant; synergistic effects

scholarly journals Indicator Layers Based on Ethylene-Vinyl Acetate Copolymer (EVA) and Dicyanovinyl Azobenzene Dyes for Fast and Selective Evaluation of Vaporous Biogenic Amines

Sensors ◽  
2018 ◽  
Vol 18 (12) ◽  
pp. 4361
Author(s):  
Tinkara Mastnak ◽  
Aleksandra Lobnik ◽  
Gerhard Mohr ◽  
Matjaž Finšgar
Keyword(s):  
Biogenic Amines ◽  
Vinyl Acetate ◽  
Colour Change ◽  
Ethylene Vinyl Acetate ◽  
Yellow Orange ◽  
Colour Changes ◽  
Limit Sensitivity ◽  
Linear Concentration Range ◽  
Acetate Copolymer ◽  
Ethylene Vinyl Acetate Copolymer

The article presents naked-eye methods for fast, sensitive, and selective detection of isopentylamine and cadaverine vapours based on 4-N,N-dioctylamino-4′-dicyanovinylazobenzene (CR-528) and 4-N,N-dioctylamino-2′-nitro-4′-dicyanovinylazobenzene (CR-555) dyes immobilized in ethylene-vinyl acetate copolymer (EVA). The reaction of CR-528/EVA and CR-555/EVA indicator layers with isopentylamine vapours caused a vivid colour change from pink/purple to yellow/orange-yellow. Additionally, CR-555/EVA showed colour changes upon exposure to cadaverine. The colour changes were analysed by ultraviolet–visible (UV/VIS) molecular absorption spectroscopy for amine quantification, and the method was partially validated for the detection limit, sensitivity, and linear concentration range. The lowest detection limits were reached with CR-555/EVA indicator layers (0.41 ppm for isopentylamine and 1.80 ppm for cadaverine). The indicator layers based on EVA and dicyanovinyl azobenzene dyes complement the existing library of colorimetric probes for the detection of biogenic amines and show great potential for food quality control.

Role of montmorillonite in flame retardancy of ethylene–vinyl acetate copolymer

2006 ◽  
Vol 91 (3) ◽  
pp. 593-599 ◽  
Author(s):  
Andrea Szép ◽  
András Szabó ◽  
Nikoletta Tóth ◽  
Péter Anna ◽  
György Marosi
Keyword(s):  
Vinyl Acetate ◽  
Flame Retardancy ◽  
Ethylene Vinyl Acetate ◽  
Acetate Copolymer ◽  
Ethylene Vinyl Acetate Copolymer
Sign in / Sign up

Export Citation Format

Share Document