Improving mechanical properties and fretting wear resistance of ultra‐high‐molecular‐weight‐polyethylene via incorporation of zeolitic imidazolate frameworks‐carbon nano‐fiber

2021 ◽  
Author(s):  
Xiaocui Xin ◽  
Yunxia Wang ◽  
Zhaojie Meng ◽  
Fengyuan Yan
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
Wear Resistance ◽  
High Molecular Weight ◽  
Fretting Wear ◽  
Zeolitic Imidazolate Frameworks ◽  
Nano Fiber ◽  
Ultra High Molecular Weight

SiO2 modified graphene oxide hybrids for improving fretting wear performance of ultra-high molecular weight polyethylene

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Xiaocui Xin ◽  
Yunxia Wang ◽  
Zhaojie Meng ◽  
Fengyuan Yan
Keyword(s):  
Molecular Weight ◽  
Wear Resistance ◽  
High Molecular Weight ◽  
Design Methodology ◽  
Fretting Wear ◽  
Wear Performance ◽  
Content Type ◽  
Modified Graphene Oxide ◽  
Modified Graphene ◽  
Ultra High Molecular Weight

Purpose The purpose of this paper is to investigate the fretting wear performance of ultra-high-molecular-weight-polyethene (UHMWPE) with addition of GO and SiO2. Design/methodology/approach In this study, GO were synthesized and SiO2 nanoparticles were grafted onto GO. The effect of nanofiller on fretting wear performance of UHMWPE was investigated. Findings The results indicated that GO was successfully synthesized and SiO2 nanoparticles successfully grafted onto GO. Incorporation of GS was beneficial for the reduction in friction and the improvement in wear resistance of UHMWPE. GO was beneficial for reducing friction coefficient, while SiO2 was good for improving wear resistance. There existed a tribological synergistic effect between GO nanosheet and SiO2 nanoparticles. Research limitations/implications The hybrids of GS were promising nanofiller for improving the fretting wear performance of UHMWPE. Originality/value The main originality of the research is to reveal the effect of GO and SiO2 nanoparticles on fretting behavior of UHMWPE. The result indicated hybrids of GS were promising nanofiller for improving the fretting wear performance of UHMWPE.

scholarly journals Process Optimization of Ultra-High Molecular Weight Polyethylene/Cellulose Nanofiber Bionanocomposites in Triple Screw Kneading Extruder by Response Surface Methodology

Molecules ◽  
2020 ◽  
Vol 25 (19) ◽  
pp. 4498
Author(s):  
Nur Sharmila Sharip ◽  
Hidayah Ariffin ◽  
Yoshito Andou ◽  
Yuki Shirosaki ◽  
Ezyana Kamal Bahrin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
Wear Resistance ◽  
Response Surface Methodology ◽  
Response Surface ◽  
High Molecular Weight ◽  
Processing Condition ◽  
Cellulose Nanofiber ◽  
Melt Viscosity ◽  
Ultra High Molecular Weight

Incorporation of nanocellulose could improve wear resistance of ultra-high molecular weight polyethylene (UHMWPE) for an artificial joint application. Yet, the extremely high melt viscosity of the polymer may constrict the mixing, leading to fillers agglomeration and poor mechanical properties. This study optimized the processing condition of UHMWPE/cellulose nanofiber (CNF) bionanocomposite fabrication in triple screw kneading extruder by using response surface methodology (RSM). The effect of the process parameters—temperature (150–190 °C), rotational speed (30–60 rpm), and mixing time (30–45 min)—on mechanical properties of the bionanocomposites was investigated. Homogenous filler distribution, as confirmed by scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) analysis, was obtained through the optimal processing condition of 150 °C, 60 rpm, and 45 min. The UHMWPE/CNF bionanocomposites exhibited improved mechanical properties in terms of Young’s and flexural modulus by 11% and 19%, respectively, as compared to neat UHMWPE. An insignificant effect was observed when maleic anhydride-grafted-polyethylene (MAPE) was added as compatibilizer. The obtained results proved that homogenous compounding of high melt viscosity UHMWPE with CNF was feasible by optimizing the melt blending processing condition in triple screw kneading extruder, which resulted in improved stiffness, a contributing factor for wear resistance.

scholarly journals Melt- vs. Non-Melt Blending of Complexly Processable Ultra-High Molecular Weight Polyethylene/Cellulose Nanofiber Bionanocomposite

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 404
Author(s):  
Nur Sharmila Sharip ◽  
Hidayah Ariffin ◽  
Tengku Arisyah Tengku Yasim-Anuar ◽  
Yoshito Andou ◽  
Yuki Shirosaki ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
Tensile Strength ◽  
Yield Strength ◽  
Young’S Modulus ◽  
High Molecular Weight ◽  
Melt Processing ◽  
Cellulose Nanofiber ◽  
Melt Blending ◽  
Ultra High Molecular Weight

The major hurdle in melt-processing of ultra-high molecular weight polyethylene (UHMWPE) nanocomposite lies on the high melt viscosity of the UHMWPE, which may contribute to poor dispersion and distribution of the nanofiller. In this study, UHMWPE/cellulose nanofiber (UHMWPE/CNF) bionanocomposites were prepared by two different blending methods: (i) melt blending at 150 °C in a triple screw kneading extruder, and (ii) non-melt blending by ethanol mixing at room temperature. Results showed that melt-processing of UHMWPE without CNF (MB-UHMWPE/0) exhibited an increment in yield strength and Young’s modulus by 15% and 25%, respectively, compared to the Neat-UHMWPE. Tensile strength was however reduced by almost half. Ethanol mixed sample without CNF (EM-UHMWPE/0) on the other hand showed slight decrement in all mechanical properties tested. At 0.5% CNF inclusion, the mechanical properties of melt-blended bionanocomposites (MB-UHMWPE/0.5) were improved as compared to Neat-UHMWPE. It was also found that the yield strength, elongation at break, Young’s modulus, toughness and crystallinity of MB-UHMWPE/0.5 were higher by 28%, 61%, 47%, 45% and 11%, respectively, as compared to the ethanol mixing sample (EM-UHMWPE/0.5). Despite the reduction in tensile strength of MB-UHMWPE/0.5, the value i.e., 28.4 ± 1.0 MPa surpassed the minimum requirement of standard specification for fabricated UHMWPE in surgical implant application. Overall, melt-blending processing is more suitable for the preparation of UHMWPE/CNF bionanocomposites as exhibited by their characteristics presented herein. A better mechanical interlocking between UHMWPE and CNF at high temperature mixing with kneading was evident through FE-SEM observation, explains the higher mechanical properties of MB-UHMWPE/0.5 as compared to EM-UHMWPE/0.5.

Effect of N2 Ion Bombardment on Optical and Mechanical Properties of Ultra-High Molecular Weight Polyethylene (UHMWPE)

2013 ◽  
Vol 341 ◽  
pp. 169-180 ◽  
Author(s):  
A.M. Abdul-Kader ◽  
Y.A. El-Gendy ◽  
Awad A. Al-Rashdi ◽  
A.M. Salem
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
High Molecular Weight ◽  
Ion Beam ◽  
Surface Hardness ◽  
Conjugation Length ◽  
High Fluences ◽  
Pristine Sample ◽  
Optical And Mechanical Properties ◽  
Ultra High Molecular Weight

The effect of ion beam bombardment on the optical and mechanical properties of ultra-high molecular weight polyethylene (UHMWPE) was investigated. UHMWPE polymer samples were bombarded with 150 keV N2ions under vacuum at room temperature to high fluences ranging from 1x1016to 2x1017ions cm-2. The untreated as well as treated samples were investigated by ultraviolet-visible (UV-Vis) spectrophotometer and Vickers micro-hardness techniques. The direct and indirect optical band gap decreased from 2.9 and 1.65 eV for pristine sample to 1.7 and 1 eV for those bombarded with N2ion beam at the highest fluence, respectively. With increasing ion fluence, an increase in the number of carbon atoms per conjugation length, N and number of carbon atoms per cluster, M in a formed cluster were observed. A significant improvement in surface hardness was obtained by increasing the ion fluence.

Sign in / Sign up

Export Citation Format

Share Document