scholarly journals A C1 finite element for flexural and torsional analysis of rectangular piezoelectric laminated/sandwich composite beams

2004 ◽  
Vol 61 (4) ◽  
pp. 584-610 ◽  
Author(s):  
M. Ganapathi ◽  
B. P. Patel ◽  
M. Touratier
Keyword(s):  
Finite Element ◽  
Composite Beams ◽  
Sandwich Composite ◽  
Torsional Analysis

Torsional Analysis of a Steel Cord-Rubber Tire Belt Structure

1996 ◽  
Vol 24 (4) ◽  
pp. 339-348 ◽  
Author(s):  
R. M. V. Pidaparti
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Composite Structures ◽  
Three Dimensional ◽  
Element Model ◽  
Torsional Stiffness ◽  
Element Analysis ◽  
Rubber Belt ◽  
Steel Cord ◽  
Torsional Analysis

Abstract A three-dimensional (3D) beam finite element model was developed to investigate the torsional stiffness of a twisted steel-reinforced cord-rubber belt structure. The present 3D beam element takes into account the coupled extension, bending, and twisting deformations characteristic of the complex behavior of cord-rubber composite structures. The extension-twisting coupling due to the twisted nature of the cords was also considered in the finite element model. The results of torsional stiffness obtained from the finite element analysis for twisted cords and the two-ply steel cord-rubber belt structure are compared to the experimental data and other alternate solutions available in the literature. The effects of cord orientation, anisotropy, and rubber core surrounding the twisted cords on the torsional stiffness properties are presented and discussed.

scholarly journals Test and Numerical Model of Curved Steel–Concrete Composite Box Beams under Positive Moments

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2978
Author(s):  
Zhi-Min Liu ◽  
Xue-Jin Huo ◽  
Guang-Ming Wang ◽  
Wen-Yu Ji
Keyword(s):  
Finite Element ◽  
Static Loading ◽  
Composite Beams ◽  
Parameter Analysis ◽  
Outer Side ◽  
Finite Element Models ◽  
Test Results ◽  
Rotational Angle ◽  
Shear Connection ◽  
Box Beams

Compared with straight steel–concrete composite beams, curved composite beams exhibit more complicated mechanical behaviors under combined bending and torsion coupling. There are much fewer experimental studies on curved composite beams than those of straight composite beams. This study aimed to investigate the combined bending and torsion behavior of curved composite beams. This paper presents static loading tests of the full elastoplastic process of three curved composite box beams with various central angles and shear connection degrees. The test results showed that the specimens exhibited notable bending and torsion coupling force characteristics under static loading. The curvature and interface shear connection degree significantly affected the force behavior of the curved composite box beams. The specimens with weak shear connection degrees showed obvious interfacial longitudinal slip and transverse slip. Constraint distortion and torsion behavior caused the strain of the inner side of the structure to be higher than the strain of the outer side. The strain of the steel beam webs was approximately linear. In addition, fine finite element models of three curved composite box beams were established. The correctness and applicability of the finite element models were verified by comparing the test results and numerical calculation results for the load–displacement curve, load–rotational angle curve, load–interface slip curve, and cross-sectional strain distribution. Finite element modeling can be used as a reliable numerical tool for the large-scale parameter analysis of the elastic–plastic mechanical behavior of curved composite box beams.

Vibration-based delamination evaluation in GFRP composite beams using ANN

2021 ◽  
pp. 096739112110033
Author(s):  
TG Sreekanth ◽  
M Senthilkumar ◽  
S Manikanta Reddy
Keyword(s):  
Finite Element ◽  
Natural Frequency ◽  
Composite Structures ◽  
Composite Beams ◽  
Vibration Characteristics ◽  
Mode Shapes ◽  
Aviation Industry ◽  
Frequency Data ◽  
Fiber Reinforced ◽  
Back Propagation Algorithm

Delamination is definitely an important topic in the area of composite structures as it progressively worsens the mechanical performance of fiber-reinforced polymer composite structures in its service period. The detection and severity analysis of delaminations in engineering areas like the aviation industry is vital for safety and economic considerations. The existence of delaminations varies the vibration characteristics such as natural frequencies, mode shapes, etc. of composites and hence this indication can be effectively used for locating and quantifying the delaminations. The changes in vibration characteristics are considered as inputs for the inverse problem to determine the location and size of delaminations. In this paper Artificial Neural Network (ANN) is used for delamination evaluationof glass fiber-reinforced composite beams using natural frequency as typical vibration parameter. The Finite Element Analysis is used for generating the required dataset for ANN. The frequency-based delamination prediction technique is validated by finite element models and experimental modal analysis. The results indicate that the ANN-based back propagation algorithm can predict the location and size of delaminations in composites with good accuracy for numerical natural frequency data but the accuracy is comparitivelyless for experimental natural frequency data.

Experimental and finite element studies on hot sizing process for L-shaped composite beams

2016 ◽  
Vol 87 ◽  
pp. 161-169 ◽  
Author(s):  
Kai Liu ◽  
Jinrui Ye ◽  
Boming Zhang ◽  
Yang Wang ◽  
Lijie Jia
Keyword(s):  
Finite Element ◽  
Composite Beams
Sign in / Sign up

Export Citation Format

Share Document