The linear matching method for the shakedown analysis of geotechnical problems

2006 ◽  
Vol 30 (2) ◽  
pp. 157-179 ◽  
Author(s):  
M. Boulbibane ◽  
A. R. S. Ponter
Keyword(s):  
Matching Method ◽  
Shakedown Analysis ◽  
Geotechnical Problems ◽  
Linear Matching Method

scholarly journals Shakedown Analysis of a Composite Cylinder With a Cross-Hole

2011 ◽  
Vol 133 (3) ◽  
Author(s):  
Haofeng Chen ◽  
Weihang Chen ◽  
Tianbai Li ◽  
James Ure
Keyword(s):  
Composite Cylinder ◽  
Temperature Dependent ◽  
Matching Method ◽  
Shakedown Analysis ◽  
Plasticity Limit ◽  
Material Discontinuities ◽  
Effects Of Temperature ◽  
Shakedown Limit ◽  
Composite Cylinders ◽  
Linear Matching Method

In this study, both the lower and upper bound shakedown limits of a closed-end composite cylinder with or without a cross-hole subject to constant internal pressure and a cyclic thermal gradient are calculated by the linear matching method. Convergence for the upper and lower bound shakedown limits of the composite cylinders is sought and shakedown limit interaction diagrams of the numerical applications identifying the regions of reverse plasticity limit and ratchet limit are presented. The effects of temperature-dependent yield stress, material discontinuities, composite cylinder thickness, and the existence of the cross-hole on the shakedown limits are discussed for different geometry parameters. Finally, a safety shakedown envelope is created by formulating the shakedown limit results of different composite materials and cylinder thickness ratios with different cross-hole sizes.

scholarly journals Creep Fatigue Life Assessment of a Pipe Intersection with Dissimilar Material Joint by Linear Matching Method

2016 ◽  
Vol 853 ◽  
pp. 366-371
Author(s):  
Daniele Barbera ◽  
Hao Feng Chen ◽  
Ying Hua Liu
Keyword(s):  
High Temperature ◽  
Fatigue Life ◽  
Direct Method ◽  
Life Assessment ◽  
Dissimilar Material ◽  
Matching Method ◽  
Fatigue Life Assessment ◽  
Creep Fatigue ◽  
The Impact ◽  
Linear Matching Method

As the energy demand increases the power industry has to enhance both efficiency and environmental sustainability of power plants by increasing the operating temperature. The accurate creep fatigue life assessment is important for the safe operation and design of current and future power plant stations. This paper proposes a practical creep fatigue life assessment case of study by the Linear Matching Method (LMM) framework. The LMM for extended Direct Steady Cycle Analysis (eDSCA) has been adopted to calculate the creep fatigue responses due to the cyclic loading under high temperature conditions. A pipe intersection with dissimilar material joint, subjected to high cycling temperature and constant pressure steam, is used as an example. The closed end condition is considered at both ends of main and branch pipes. The impact of the material mismatch, transitional thermal load, and creep dwell on the failure mechanism and location within the intersection is investigated. All the results demonstrate the capability of the method, and how a direct method is able to support engineers in the assessment and design of high temperature component in a complex loading scenario.

A Novel Fatigue Evaluation Approach with Direct Steady Cycle Analysis (DSCA) Based on the Linear Matching Method (LMM)

2019 ◽  
Vol 795 ◽  
pp. 383-388 ◽  
Author(s):  
Xiao Tao Zheng ◽  
Zhi Yuan Ma ◽  
Hao Feng Chen ◽  
Jun Shen
Keyword(s):  
Fatigue Life ◽  
Evaluation Method ◽  
Low Cycle Fatigue ◽  
Effective Strain ◽  
Strain Range ◽  
Matching Method ◽  
Evaluation Approach ◽  
Perfectly Plastic ◽  
Fatigue Evaluation ◽  
Linear Matching Method

The traditional Low Cycle Fatigue (LCF) evaluation method is based on elastic analysis with Neuber’s rule which is usually considered to be over conservative. However, the effective strain range at the steady cycle should be calculated by detailed cycle-by-cycle analysis for the alternative elastic-plastic method in ASME VIII-2, which is obviously time-consuming. A Direct Steady Cycle Analysis (DSCA) method within the Linear Matching Method (LMM) framework is proposed to assess the fatigue life accurately and efficiently for components with arbitrary geometries and cyclic loads. Temperature-dependent stress-strain relationships considering the strain hardening described by the Ramberg-Osgood (RO) formula are discussed and compared with those results obtained by the Elastic-Perfectly Plastic (EPP) model. Additionally, a Reversed Plasticity Domain Method (RPDM) based on the shakedown and ratchet limit analysis method and the DSCA approach within the LMM framework (LMM DSCA) is recommended to design cyclic load levels of LCF experiments with predefined fatigue life ranges.

Sign in / Sign up

Export Citation Format

Share Document