A Polymerization Kinetics Comparison between a Metallocene Catalyst Activated by Tetrakis(pentafluorophenyl) Borate and MAO for the Polymerization of Ethylene in a Semi-batch Solution Reactor

2011 ◽  
Vol 5 (9-10) ◽  
pp. 418-430 ◽  
Author(s):  
Saeid Mehdiabadi ◽  
Joaõ B. P. Soares ◽  
Daniel Bilbao ◽  
Jeffrey L. Brinen
1980 ◽  
Vol 45 (9) ◽  
pp. 2391-2399 ◽  
Author(s):  
Miroslav Kašpar ◽  
Jiří Trekoval

The polymerization kinetics of isoprene (2-methyl-1,3-butadiene) in benzene with butyllithium as the initiator was investigated by the gas chromatographic method. After completion of the initial period of the reaction, its order with respect to the initial concentration of initiator is negative at the concentrations of the latter between 0.01 and 0.25 mol/l, and positive at higher concentrations. A reaction scheme has been suggested with respect to the "cross" association of butyllithium and of the "living" oligoisoprene.


1980 ◽  
Vol 45 (12) ◽  
pp. 3338-3346
Author(s):  
Miroslav Kašpar ◽  
Jiří Trekoval

The effect of small additions of 1-octene, butyl ethyl ether and triethylamine on the polymerization kinetics of isoprene (2-methyl-1,3-butadiene) in benzene initiated with butyllithium was investigated by employing the GLC analysis. The addition of 1-octane was reflected only in a shorter induction period of the reaction; the effect on the propagation rate was insignificant. With the increasing amount of butyl ethyl ether, the polymerization rate increases linearly, while the reaction order with respect to the concentration of triethylamine is variable and increases from 0.33 to 0.66 with the increasing concentration of the initiator. For a constant concentration of triethylamine, the reaction order with respect to the initial concentration of the initiator was found to vary considerably, reaching even negative values. A reaction scheme was suggested, taking into account the competition between two different solvates of alkyllithium.


Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2091
Author(s):  
Daniela Mileva ◽  
Jingbo Wang ◽  
René Androsch ◽  
Katalee Jariyavidyanont ◽  
Markus Gahleitner ◽  
...  

Propylene-based random copolymers with either ethylene or 1-hexene as comonomer, produced using a metallocene catalyst, were studied regarding their crystallization behaviors, with a focus on rapid cooling. To get an impression of processing effects, fast scanning chip calorimetry (FSC) was used in addition to the characterization of the mechanical performance. When comparing the comonomer type and the relation to commercial grades based on Ziegler–Natta-type catalysts, both an interaction with the catalyst-related regio-defects and a significant difference between ethylene and 1-hexene was observed. A soluble-type nucleating agent was found to modify the behavior, but to an increasingly lesser degree at high cooling rates.


Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1686
Author(s):  
Andrey Galukhin ◽  
Roman Nosov ◽  
Ilya Nikolaev ◽  
Elena Melnikova ◽  
Daut Islamov ◽  
...  

A new rigid tricyanate ester consisting of seven conjugated aromatic units is synthesized, and its structure is confirmed by X-ray analysis. This ester undergoes thermally stimulated polymerization in a liquid state. Conventional and temperature-modulated differential scanning calorimetry techniques are employed to study the polymerization kinetics. A transition of polymerization from a kinetic- to a diffusion-controlled regime is detected. Kinetic analysis is performed by combining isoconversional and model-based computations. It demonstrates that polymerization in the kinetically controlled regime of the present monomer can be described as a quasi-single-step, auto-catalytic, process. The diffusion contribution is parameterized by the Fournier model. Kinetic analysis is complemented by characterization of thermal properties of the corresponding polymerization product by means of thermogravimetric and thermomechanical analyses. Overall, the obtained experimental results are consistent with our hypothesis about the relation between the rigidity and functionality of the cyanate ester monomer, on the one hand, and its reactivity and glass transition temperature of the corresponding polymer, on the other hand.


2019 ◽  
Vol 220 (19) ◽  
pp. 1900259 ◽  
Author(s):  
Alba Nidia Estrada‐Ramirez ◽  
Carolina Ventura‐Hunter ◽  
Jürgen Vitz ◽  
Enrique Díaz‐Barriga Castro ◽  
René D. Peralta‐Rodriguez ◽  
...  

2005 ◽  
Vol 26 (5) ◽  
pp. 357-360 ◽  
Author(s):  
Miroslav Skoumal ◽  
Igor Cejpek ◽  
Chung Ping Cheng

Sign in / Sign up

Export Citation Format

Share Document