Abstract. More so than the traditional fixed radiometers, the scanning radiometer requires a careful design to ensure high quality measurements. Here the impact of the radiometer characteristics (e.g. antenna beam width, receiver bandwidth) and atmospheric propagation (e.g. curvature of the earth and refractivity) on the scanning radiometer measurements are presented. A forward radiative transfer model that includes all these effects to represent the instrument measurements is used to estimate the biases as differences between the measurement with and without these characteristics for three commonly used frequency bands: K, V and W-band. The receiver channel bandwidth errors are not so important in K-band and W-band. Thus, the use of a wider bandwidth to improve detection at low signal-to-noise conditions is acceptable. The impact of the antenna beam width is higher than the receiver bandwidth, but, for V-band where they are of similar importance. Using simple regression algorithms, the effects of the bandwidth and beam width biases in liquid water path, integrated water vapor, and temperature are also examined. The largest errors in liquid water path and integrated water vapor are associated with the beam width errors.
Biases caused by the instrument bandwidth and beam width on simulated brightness temperature measurements from scanning microwave radiometers