A quasi‐elliptical bandpass frequency selective surface with low‐profile and miniaturization characteristics

2021 ◽  
Author(s):  
Huangyan Li ◽  
Filippo Costa ◽  
Yi Wang ◽  
Qunsheng Cao ◽  
Agostino Monorchio
Keyword(s):  
Frequency Selective Surface ◽  
Low Profile ◽  
Frequency Selective

Miniaturized frequency selective surface with high angular stability

Frequenz ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Zain Ul Abidin ◽  
Qunsheng Cao ◽  
Gulab Shah ◽  
Zaheer Ahmed Dayo ◽  
Muhammad Ejaz
Keyword(s):  
Resonant Frequency ◽  
Electric Field Distribution ◽  
Equivalent Circuit Model ◽  
Surface Current ◽  
Frequency Selective Surface ◽  
Angular Stability ◽  
Working Mechanism ◽  
Low Profile ◽  
Simple Geometry ◽  
Frequency Selective

Abstract In this paper, a miniaturized bandstop frequency selective surface (FSS) with high angular stability is presented. Each FSS element consists of four sets each consisting eight octagonal concentric interconnected loops. The four sets are connected with each other through outermost octagonal loop. The unit size is miniaturized to 0.066 λ0 at the resonant frequency of 1.79 GHz. The proposed configuration achieves excellent angular stability (only 0.025 GHz resonant frequency deviation is observed upto 83° oblique angles). The working mechanism of FSS is explained with the help of equivalent circuit model (ECM), electric field distribution, and corresponding surface current distribution. A prototype of the designed bandstop FSS is fabricated to verify the simulated frequency response. The experimental results are consistent with the simulation results. Simple geometry, low profile, high angular stability, and compact cell size are prominent features of the proposed structure.

A Low-Profile Third-Order Bandpass Frequency Selective Surface

2009 ◽  
Vol 57 (2) ◽  
pp. 460-466 ◽  
Author(s):  
Nader Behdad ◽  
Mudar Al-Joumayly ◽  
Mohsen Salehi
Keyword(s):  
Frequency Selective Surface ◽  
Third Order ◽  
Low Profile ◽  
Frequency Selective

scholarly journals X-band Band-pass Frequency Selective Surface for Radome Applications

2015 ◽  
Vol 16 (2) ◽  
pp. 281
Author(s):  
Tariq Rahim ◽  
Jiodong Xu
Keyword(s):  
Frequency Selective Surface ◽  
Unit Cell ◽  
Dielectric Substrates ◽  
Low Profile ◽  
X Band ◽  
Analysis And Synthesis ◽  
Unit Cells ◽  
Band Pass ◽  
Frequency Selective ◽  
Unit Cell Dimensions

A low profile multi layer miniaturized unit cell frequency selective surface (FSS) with second-order band-pass response is design. The metallic layers in the form of capacitive patches and inductive grids are separated by dielectric substrates. The non-resonant sub-wavelength unit cells with unit cell dimensions and periodicities on the order of 0.15λ. The overall thickness of approximately 0.03λ is designed which is useful at lower frequencies with long wavelengths. The FSS exhibit a stable frequency response to different angles of incidence and polarizations. The analysis and synthesis of the FSS is done using equivalent circuit method and simulated using CST microwave studio at X-band.

Polarization independent bandstop frequency selective surface for X-band application

Circuit World ◽  
2019 ◽  
Vol 46 (1) ◽  
pp. 25-31
Author(s):  
Kanchana D. ◽  
Radha Sankararajan ◽  
Sreeja B.S. ◽  
Manikandan E.
Keyword(s):  
Frequency Selective Surface ◽  
Transverse Magnetic ◽  
Unit Cell Dimension ◽  
Unit Cell ◽  
Content Type ◽  
Low Profile ◽  
X Band ◽  
Measurement Results ◽  
Frequency Selective ◽  
Polarization Independent

Purpose A novel low profile frequency selective surface (FSS) with a band-stop response at 10 GHz is demonstrated. The purpose of this designed FSS structure is to reject the X-band (8-12 GHz) for the application of shielding. The proposed FSS structure having the unit cell dimension of 8 × 8 mm2, the miniaturization of the FSS unit cell in terms of λ0 is 0.266 λ0 × 0.266 λ0, where λ0 is free space wavelength. The designed FSS provides 4 GHz bandwidth with insertion loss of 15 dB. The transverse electric (TE) and transverse magnetic (TM) modes of the proposed design are same because of polarization independent characteristics and hold the angularly stable frequency response for both TE and TM mode polarization. Both the simulation and measurement results are in good agreement to each other. Design/methodology/approach The proposed FSS design contains square-shaped PEC material, which is placed on the substrate and the shape of the circle and rectangle is etched over the PEC material. The PEC material of the patch dimension is 0.0175 mm. The substrate used for the proposed design is FR4 lossy with the thickness of 0.8 mm and permittivity εr = 4.3 having a loss tangent of 0.02. Findings To find a new design and miniaturized FSS structure is discussed. Originality/value 100%

A Miniaturized Low-Profile Multilayer Frequency-Selective Surface Insensitive to Surrounding Dielectric Materials

2017 ◽  
Vol 65 (12) ◽  
pp. 4851-4860 ◽  
Author(s):  
Muaad Naser Hussein ◽  
Jiafeng Zhou ◽  
Yi Huang ◽  
Muayad Kod ◽  
Abed Pour Sohrab
Keyword(s):  
Frequency Selective Surface ◽  
Dielectric Materials ◽  
Low Profile ◽  
Frequency Selective
Sign in / Sign up

Export Citation Format

Share Document