Low‐cost wide‐bandwidth high‐gain circularly polarized patch antenna array based on substrate integrated waveguide

2021 ◽  
Vol 31 (5) ◽  
Author(s):  
Xiaoying Zuo ◽  
Jianguo Yu
Keyword(s):  
Antenna Array ◽  
Patch Antenna ◽  
Low Cost ◽  
High Gain ◽  
Substrate Integrated Waveguide ◽  
Wide Bandwidth ◽  
Circularly Polarized

scholarly journals Compact and High Gain 4 × 4 Circularly Polarized Microstrip Patch Antenna Array for Next Generation Small Satellite

2021 ◽  
Vol 11 (19) ◽  
pp. 8869
Author(s):  
Manzoor Elahi ◽  
Son Trinh-Van ◽  
Youngoo Yang ◽  
Kang-Yoon Lee ◽  
Keum-Cheol Hwang
Keyword(s):  
Antenna Array ◽  
Patch Antenna ◽  
Axial Ratio ◽  
High Gain ◽  
Microstrip Patch Antenna ◽  
Small Satellite ◽  
Next Generation ◽  
Circularly Polarized ◽  
Microstrip Patch ◽  
Left Handed

In this article, a high gain and compact 4 × 4 circularly polarized microstrip patch antenna array is reported for the data transmission of the next-generation small satellite. The radiating element of the circularly polarized antenna array is realized by the conventional model of the patch with truncated corners. A compact two-stage sequential rotational phase feeding is adopted that broadens the operating bandwidth of the 4 × 4 array. A small stub is embedded in the sequential rotational feed, which results in better performance in terms of the S-parameters and sequential phases at the output ports than sequential rotational feed without open stub. A prototype of the array is fabricated and measured. Fulfilling the application requirements of the next-generation small satellites, the array has the left-handed circularly polarized gain of more than 12 dBic with the axial ratio level below 1.5 dB in the ±10∘ angular space with respect to the broadside direction for the whole bandwidth from 8.05 GHz to 8.25 GHz. Moreover, the left-handed circularly polarized gain varies from 15 to 15.5 dBic in the desired band. The radiation patterns are measured; both the co- and X-pol are validated.

scholarly journals Design and Analysis of a 35 GHz Rectenna System for Wireless Power Transfer to an Unmanned Air Vehicle

Energies ◽  
2022 ◽  
Vol 15 (1) ◽  
pp. 320
Author(s):  
Muttahid Ull Hoque ◽  
Deepak Kumar ◽  
Yves Audet ◽  
Yvon Savaria
Keyword(s):  
Antenna Array ◽  
Microwave Power ◽  
Patch Antenna ◽  
High Efficiency ◽  
Low Cost ◽  
High Gain ◽  
Input Power ◽  
Design System ◽  
Power Transfer ◽  
Critical System

In this article, the concept of a 22-kW microwave-powered unmanned aerial vehicle is presented, where the critical system architecture is analyzed and modeled for wirelessly transferring microwave power to the flying UAVs. The microwave system transmitting power at a 35 GHz frequency was found to be suitable for low-cost and compact architectures. The size of the transmitting and receiving systems are optimized to 108 m2 and 90 m2, respectively. A linearly polarized 4 × 2 rectangular microstrip patch antenna array has been designed and simulated to obtain a high gain, high directivity, and high efficiency in order to satisfy the power transfer requirement. The numerically simulated gain, directivity, and efficiency of the proposed patch antenna array are 13.4 dBi, 14 dBi, and 85%, respectively. Finally, a rectifying system (rectenna) is optimized using the Agilent advanced design system (ADS) software as a microwave power receiving system. The proposed rectenna has an efficiency profile of more than 80% for an RF input power range of 9 to 18 dBm. Moreover, the RF-to-DC conversion efficiency and DC output voltage of the proposed rectenna is 80% and 3.5 V, respectively, for a 10 dBm input power at 35 GHz with a load of 1500 Ω.

Sign in / Sign up

Export Citation Format

Share Document