Influence of equal channel angular pressing in an acute angle die with a back pressure notch on grain refinement, torsion and mechanical properties of aluminium

2019 ◽  
Vol 50 (2) ◽  
pp. 155-164 ◽  
Author(s):  
N. Sadasivan ◽  
M. Balasubramanian ◽  
R. Venkatesh ◽  
S. Vigneshram ◽  
T. Sunil
Keyword(s):  
Mechanical Properties ◽  
Grain Refinement ◽  
Equal Channel Angular Pressing ◽  
Acute Angle ◽  
Back Pressure ◽  
Angular Pressing

Mechanical Properties and Texture Evolution of AZ31 Mg Alloy during Equal Channel Angular Pressing

2005 ◽  
Vol 475-479 ◽  
pp. 545-548 ◽  
Author(s):  
Hyo Tae Jeong ◽  
Woo Jin Kim
Keyword(s):  
Mechanical Properties ◽  
Grain Refinement ◽  
Equal Channel Angular Pressing ◽  
Texture Evolution ◽  
Fiber Texture ◽  
Mg Alloy ◽  
Angular Pressing ◽  
Ecap Process ◽  
Az31 Mg Alloy ◽  
Similar Texture

Microstructure and texture evolution in the AZ31 Mg alloy subject to equal channel angular pressing (ECAP) have been investigated and correlated with the mechanical properties. When AZ31 Mg alloy was ECAPed up to 8 passes following the route Bc, grain refinement occurred effectively. Texture was also changed during ECAP. The original fiber texture of the extruded AZ31 Mg alloy changed to a new texture component of ] 1 3 2 5 )[ 1 1 01 ( , and the texture of ] 1 3 2 5 )[ 1 1 01 ( orientation was rotated to ] 0 2 5 7 )[ 6 4 13 ( orientation after 6-pass ECAP process. The variation of the strength with the pass number was explained by the texture and grain size. The strength data of AZ31 Mg alloys followed the standard Hall-Petch relationship when the similar texture was retained during the ECAP process. Otherwise the effect of texture on strength was dominant over the strengthening due to grain refinement.

scholarly journals Applying Hybrid Equal Channel Angular Pressing (HECAP) to pure copper using optimized Exp.-ECAP die

2021 ◽  
Author(s):  
Serkan Öğüt ◽  
Hasan Kaya ◽  
Aykut Kentli ◽  
Mehmet UÇAR
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Grain Refinement ◽  
Equal Channel Angular Pressing ◽  
Pure Copper ◽  
Mechanical Tests ◽  
Geometric Parameters ◽  
Homogeneous Distribution ◽  
Angular Pressing ◽  
Ecap Process

Abstract Equal channel angular pressing (ECAP), expansion equal channel angular pressing (Exp.-ECAP) and hybrid equal channel angular pressing (HECAP) processes were applied to pure copper specimens within this study. Before the ECAP and HECAP processes, an Exp.-ECAP mold with optimum geometric parameters was produced to be used in these processes. The samples, on which ECAP, Exp.-ECAP and HECAP processes were applied, were subjected to microstructure analysis and mechanical tests, and the effects of these processes were examined. The results obtained showed that the Exp.-ECAP process gave better results in grain refinement and mechanical properties, and the Exp.-ECAP passes applied after the ECAP process within the scope of the HECAP process provided a more homogeneous distribution for grain size and hardness.

scholarly journals Mechanical Properties and Microstructure Evolution of Mg-6 wt % Zn Alloy during Equal-Channel Angular Pressing

Metals ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 841 ◽  
Author(s):  
Jingli Yan ◽  
Zijun Qin ◽  
Kai Yan
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Grain Refinement ◽  
Equal Channel Angular Pressing ◽  
Testing Machine ◽  
Grain Structure ◽  
X Ray Diffraction ◽  
Angular Pressing ◽  
Transmission Electron ◽  
Zn Alloy

Equal-channel angular pressing (ECAP) was performed on a Mg (6 wt %) Zn alloy at temperatures from 160 to 240 °C and the microstructures and mechanical properties were studied using optical microscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and an electronic universal testing machine. The results showed that ECAP was effective for grain refinement and a bi-modal grain structure formed at low temperatures, which was stable during ECAP from 160 to 200 °C. MgZn2 phase and Mg4Zn7 phase were generated during the ECAP process. The mechanical properties remarkably increased after two repetitions of ECAP. However, the strengths could not be further improved by increasing the plastic deformation, but decreased when ECAP was performed between 200 and 240 °C. The mechanical properties of the ECAP Mg-6Zn alloy was determined by a combination of grain refinement strengthening, precipitation hardening, and texture softening.

scholarly journals The Effect of Equal-Channel Angular Pressing on Microstructure, Mechanical Properties, and Biodegradation Behavior of Magnesium Alloyed with Silver and Gadolinium

Crystals ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 918
Author(s):  
Boris Straumal ◽  
Natalia Martynenko ◽  
Diana Temralieva ◽  
Vladimir Serebryany ◽  
Natalia Tabachkova ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Grain Refinement ◽  
Equal Channel Angular Pressing ◽  
Fine Particles ◽  
Volume Fraction ◽  
Galvanic Corrosion ◽  
Angular Pressing ◽  
Average Grain Size ◽  
The Matrix ◽  
Mechanical Properties And Corrosion

The effect of equal channel angular pressing (ECAP) on the microstructure, texture, mechanical properties, and corrosion resistance of the alloys Mg-6.0%Ag and Mg-10.0%Gd was studied. It was shown that ECAP leads to grain refinement of the alloys down to the average grain size of 2–3 μm and 1–2 μm, respectively. In addition, in both alloys the precipitation of fine particles of phases Mg54Ag17 and Mg5Gd with sizes of ~500–600 and ~400–500 nm and a volume fraction of ~9% and ~8.6%, respectively, was observed. In the case of the alloy Mg-6.0%Ag, despite a significant grain refinement, a drop in the strength characteristics and a nearly twofold increase in ductility (up to ~30%) was found. This behavior is associated with the formation of a sharp inclined basal texture. For alloy Mg-10.0%Gd, both ductility and strength were enhanced, which can be associated with the combined effect of significant grain refinement and an increased probability of prismatic and basal glide. ECAP was also shown to cause a substantial rise of the biodegradation rate of both alloys and an increase in pitting corrosion. The latter effect is attributed to an increase in the dislocation density induced by ECAP and the occurrence of micro-galvanic corrosion at the matrix/particle interfaces.

Equal Channel Angular Pressing of Al Alloy AA2219

2009 ◽  
Vol 67 ◽  
pp. 53-58
Author(s):  
V. Anil Kumar ◽  
M.K. Karthikeyan ◽  
Rohit Kumar Gupta ◽  
P. Ramkumar ◽  
P.P. Sinha
Keyword(s):  
Mechanical Properties ◽  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Grain Refinement ◽  
Equal Channel Angular Pressing ◽  
High Strength ◽  
Dark Field ◽  
Grain Structure ◽  
Al Alloy ◽  
Angular Pressing

Severe plastic deformation processes (SPD) are gaining importance as advanced materials processing techniques and hold immense potential in obtaining ultra fine-grained high strength materials. Among the SPD techniques, Equal channel angular pressing (ECAP) has its own merits to produce materials with ultra fine grains in bulk with better mechanical properties. The material deforms with high level of plastic strain inside the channel resulting in grain refinement of the output material with improvement in mechanical properties. A very viable die configuration was conceptualized and die was made with 1200 channel angle. Processing of 25 mm dia. of Al alloy AA2219 at room temperature was successfully carried out and grain refinement was observed. The mechanism of grain refinement has been studied using optical and transmission electron microscopy (TEM). It was observed that low energy dislocation structure (LEDS) forms concurrently with sub-grain structure due to dislocation rearrangements, which provide stability to the evolving sub-grain structure. Dislocation mobility is hindered by the presence of precipitates and / or intermetallic dispersoids present in the matrix and results in presence of dislocations in grain interiors. The pile up of dislocations at intermetallic dispersoids was confirmed from the dark field TEM micrographs. Present paper describes the experimental procedure and followed to attain severe plastic deformation through ECAP. Increase in hardness as well as refinement in the grain size after 5-passes have been discussed in light of extensive optical and TEM. The mechanisms of grain refinement to achieve nano-grained structure and strengthening accrued from the grain refinement through ECAP has been discussed.

Analysis of the Fundamental Mechanisms and Efficiency of the Deformation Methods of Nanostructuring

2008 ◽  
Vol 584-586 ◽  
pp. 29-34 ◽  
Author(s):  
Radik R. Mulyukov ◽  
Ayrat A. Nazarov ◽  
Renat M. Imayev
Keyword(s):  
Mechanical Properties ◽  
Plastic Deformation ◽  
High Pressure ◽  
High Temperature ◽  
Severe Plastic Deformation ◽  
Grain Refinement ◽  
Equal Channel Angular Pressing ◽  
Efficient Method ◽  
High Pressure Torsion ◽  
Angular Pressing

Deformation methods of nanostructuring (DMNs) of materials are proposed to classify into severe plastic deformation (SPD) and mild plastic deformation (MPD) methods according to fundamentally different low- and high-temperature grain refinement mechanisms they exploit. A general analysis of the fundamentals and nanostructuring efficiency of three most developed DMNs, high pressure torsion (HPT), equal-channel angular pressing (ECAP), and multiple isothermal forging (MIF) is done with a particular attention to ECAP and MIF. It is demonstrated that MIF is the most efficient method of DMNs allowing one to obtain the bulkiest nanostructured samples with enhanced mechanical properties.

Sign in / Sign up

Export Citation Format

Share Document