Effect of Divalent Metal Ions on Curing Characteristics and Dynamic Mechanical Properties of Natural Rubber

2015 ◽  
Vol 354 (1) ◽  
pp. 287-293 ◽  
Author(s):  
Songkot Utara ◽  
Paibool Saengsila
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Metal Ions ◽  
Dynamic Mechanical Properties ◽  
Divalent Metal ◽  
Divalent Metal Ions ◽  
Dynamic Mechanical ◽  
Curing Characteristics

scholarly journals Dynamic Mechanical Properties of Vietnam Modified Natural Rubber via Grafting with Styrene

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
T. A. Dung ◽  
N. T. Nhan ◽  
N. T. Thuong ◽  
D. Q. Viet ◽  
N. H. Tung ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Graft Copolymer ◽  
Graft Copolymerization ◽  
Dynamic Mechanical Properties ◽  
Dynamic Mechanical ◽  
Tert Butyl Hydroperoxide ◽  
Wide Range ◽  
Redox Initiator ◽  
Tetraethylene Pentamine

The dynamic mechanical behavior of modified deproteinized natural rubber (DPNR) prepared by graft copolymerization with various styrene contents was investigated at a wide range of temperatures. Graft copolymerization of styrene onto DPNR was performed in latex stage using tert-butyl hydroperoxide (TBHPO) and tetraethylene pentamine (TEPA) as redox initiator. The mechanical properties were measured by tensile test and the viscoelastic properties of the resulting graft copolymers at wide range of temperature and frequency were investigated. It was found that the tensile strength depends on the grafted polystyrene; meanwhile the dynamic mechanical properties of the modification of DPNR meaningfully improved with the increasing of both homopolystyrene and grafted polystyrene compared to DPNR. The dynamic mechanical properties of graft copolymer over a large time scale were studied by constructing the master curves. The value of bT has been used to prove the energetic and entropic elasticity of the graft copolymer.

Effect of Substitutional Monovalent and Divalent Metal Ions on Mechanical Properties of β-Tricalcium Phosphate

2005 ◽  
Vol 88 (8) ◽  
pp. 2315-2318 ◽  
Author(s):  
Katsumi Yoshida ◽  
Naoki Kondo ◽  
Hideki Kita ◽  
Masanori Mitamura ◽  
Kazuaki Hashimoto ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Metal Ions ◽  
Tricalcium Phosphate ◽  
Divalent Metal ◽  
Divalent Metal Ions

Morphology and Mechanical Properties of NiZn Ferrite/Thermoplastic Natural Rubber Composite

2014 ◽  
Vol 925 ◽  
pp. 308-312 ◽  
Author(s):  
Mou'ad A. Tarawneh ◽  
Sahrim Haji Ahmad ◽  
Yu Li Jiun ◽  
Radwan Dweiri ◽  
Ibrahim N. Hassan
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Mechanical Test ◽  
Polymer Nanocomposite ◽  
Dynamic Mechanical Properties ◽  
Filler Loading ◽  
Rubber Matrix ◽  
Dynamic Mechanical ◽  
Blending Method ◽  
Thermoplastic Natural Rubber

In this paper the polymer nanocomposite of nickel zinc (NiZn) ferrite nanoparticles incorporated into the thermoplastic natural rubber nanocomposite (TPNR) were prepared via melt blending method. The effect of different NiZn loading (2-10 wt%) on morphology, tensile and dynamic mechanical properties of the obtained composites was investigated. It was found that NiZn ferrite is well dispersed in the thermoplastic natural rubber matrix. The tensile results indicated that filler loading has improved the tensile strength and Youngs modulus of the nanocomposite. However, the elongation at break decreased with increasing the percentage of NiZn. Dynamic mechanical test showed that the highest storage modulus is at 8 wt% filler. Any further increment of the filler content leads to the formation of agglomerate hence affecting the properties. The Scanning electron micrograph (SEM) micrographs reveal aspect ratio and filler orientation in the TPNR matrix also strongly promoted interfacial adhesion between the filler and the matrix to control its properties.

Mixing Methods Influencing on Properties of Epoxidized Natural Rubber/Polypropylene Thermoplastic Vulcanizates

2013 ◽  
Vol 844 ◽  
pp. 109-112 ◽  
Author(s):  
Chesidi Hayichelaeh ◽  
Charoen Nakason ◽  
Anoma Thitithammawong
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Dynamic Mechanical Properties ◽  
Epoxidized Natural Rubber ◽  
Melt Mixing ◽  
Dynamic Mechanical ◽  
Thermoplastic Vulcanizates ◽  
Mixing Method ◽  
Internal Mixer

Epoxidized natural rubber (ENR)/Polypropylene (PP) thermoplastic vulcanizates were prepared by melt mixing method in an internal mixer. Influences of different mixing methods for incorporation of processing oil into the TPVs on tensile and dynamic mechanical properties of the TPVs and crystallinity of the PP were investigated. Results show that distribution of processing oil in the ENR/PP TPV is important due to the processing oil can promote and in the same time can interrupt an improvement in elastomeric properties of the TPV. Incorporation of processing oil into the ENR phase by preparation of oil extended ENR (the mixing method 1) before mixing with the PP was the better way to produce the TPV. It promoted the TPV with superior tensile and dynamic mechanical properties than the TPVs prepared from the mixing method 2 and 3 in which the processing oil was directly added into the PP phase. Furthermore, the TPV from the mixing method 1 had less effect of processing oil on the PP crystallization.

Preparation and Characterization of Nanocrystalline Cellulose/Natural Rubber (NCC/Nr) Composites

2013 ◽  
Vol 712-715 ◽  
pp. 111-114 ◽  
Author(s):  
Tian Ming Gao ◽  
Mao Fang Huang ◽  
Rui Hong Xie ◽  
Hong Lian Chen
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Natural Rubber Latex ◽  
Dynamic Mechanical Properties ◽  
Mechanical Analysis ◽  
Nanocrystalline Cellulose ◽  
Rubber Latex ◽  
Dynamic Mechanical ◽  
Surface Modified

Surface modified nanocrystalline cellulose (NCC) was prepared by silicon-69, and then blended into natural rubber latex to prepare nanocomposites. The nanocomposites properties of tensile properties, tear strength, morphology and thermal dynamic mechanical properties were measured by mechanical property testing, scanning electron microscopy (SEM), and dynamic mechanical analysis (DMA), respectively. The results showed that modified NCC is homogeneously distributed throughout NR matrix, which leads to the enhancement on mechanical properties. Moreover, the storage modulus (E) of modified nanocellulose filled NR is higher than unmodified nanocellulose filled NR, and the tanδ is reversed.

Sign in / Sign up

Export Citation Format

Share Document