Synthesis of Polyurethane from Poly(3-hydroxybutyrate) and Poly(p -dioxanone): Molar Mass Reduction via Sodium Borohydrate

2011 ◽  
Vol 299-300 (1) ◽  
pp. 10-19 ◽  
Author(s):  
Jonathan Melo Bergamaschi ◽  
Eduardo Jorge Pilau ◽  
Fábio Cesar Gozzo ◽  
Maria Isabel Felisberti
Keyword(s):  
Molar Mass ◽  
Mass Reduction

2295-PUB: Impaired First-Phase Insulin Secretion Predicts the Development of Hyperglycemia in a Human Model of Acute Beta-Cell Mass Reduction

Diabetes ◽  
2020 ◽  
Vol 69 (Supplement 1) ◽  
pp. 2295-PUB
Author(s):  
TERESA MEZZA ◽  
PIETRO MANUEL FERRARO ◽  
GIANFRANCO DI GIUSEPPE ◽  
CHIARA MARIA ASSUNTA CEFALO ◽  
SIMONA MOFFA ◽  
...  
Keyword(s):  
Insulin Secretion ◽  
Beta Cell ◽  
Cell Mass ◽  
Beta Cell Mass ◽  
Human Model ◽  
Mass Reduction ◽  
First Phase Insulin Secretion

Effect of planting date and density on calendula and peppermint herbs

2014 ◽  
Vol 1 (1) ◽  
pp. 25-29
Author(s):  
Rahim Mohammadian ◽  
Behnam Tahmasebpour ◽  
Peyvand Samimifar
Keyword(s):  
Mutual Effect ◽  
Dry Weight ◽  
Planting Date ◽  
Mass Reduction ◽  
Flower Number ◽  
Planting Dates ◽  
Randomized Design ◽  
Significant Difference ◽  
Completely Randomized Design ◽  
Total Maximum

A factorial experiment was conducted with a completely randomized design to evaluate the effects of planting date and density on calendula herbs and peppermint. It had 3 replicates and was done in Khosroshahr research farm, Tabriz in 2006. Under studied factors were: 3 planting dates (10 May, 25 May and 10 June) in 4 densities (25, 35, 45, 55) of the plant in square meters. The results of variance a nalysis showed that there was 1% probability significant difference between the effects of planting date and bush density on the leave number, bush height and the bush dry weight. But the mutual effect of the plant date in mentioned traits density was insignificant. Regarding the traits mean comparison, the total maximum dry weight was about the 55 bush density in mm. Also, the bush high density in mm causes the bush growth and its mass reduction. When there is the density grain, the flower number will increase due to bush grain in surface unit. Overall, we can conclude that 10 June planting and 45 bush density in mm is the most suitable items and results in favored production with high essence for these crops.

Paper Chemistry: Interactions of thermo mechanical pulp fractions with high molar mass cationic polyacrylamides: Part 2. Flocculation

2010 ◽  
Vol 25 (3) ◽  
pp. 310-318 ◽  
Author(s):  
Tero Taipale ◽  
Janne Laine ◽  
Susanna Holappa ◽  
Jonni Ahlgren ◽  
Juan Cecchini
Keyword(s):  
Molar Mass ◽  
High Molar Mass ◽  
Mechanical Pulp ◽  
Paper Chemistry

Selective determination of non-biodegradable polar, organic pollutants in waste water related to functional groups using flow injection combined with tandem mass spectrometry

1996 ◽  
Vol 34 (7-8) ◽  
pp. 21-28 ◽  
Author(s):  
H. Fr. Schröder
Keyword(s):  
Mass Spectrometry ◽  
Tandem Mass Spectrometry ◽  
Functional Groups ◽  
Organic Pollutants ◽  
Molar Mass ◽  
Sewage Treatment ◽  
Tandem Mass ◽  
Screening Process ◽  
Selective Determination ◽  
Characteristic Fragment

Effluents of biological sewage treatment plants mainly contain non-biodegradable, polar, organic pollutants of biogenic and anthropogenic origin. This paper presents a substance-specific determination method for these compounds, which are partly able to reach drinking water during the soil filtration process. Tandem mass spectrometry (MS/MS) combined with softly ionizing interfaces is applied for this purpose. The behaviour of the functional groups of these pollutants - forming characteristic fragment ions under MS/MS conditions and abstracting neutral particles - is used for detection. With help from this screening process on specific functional groups it is possible to establish the presence of substance groups with similar behaviour in the aquatic environment. Additionally this analytical procedure provides information on the molar mass of the pollutants detected. In a second step the compounds characterized by the molar mass and belonging to a group of pollutants with specific functional groups can be identified using MS/MS.

QELSS diffusion data for moderately broad molar mass distribution polymer samples compared with data from classical gradient techniques

1989 ◽  
Vol 54 (7) ◽  
pp. 1821-1829
Author(s):  
Bedřich Porsch ◽  
Simon King ◽  
Lars-Olof Sundelöf
Keyword(s):  
Diffusion Coefficient ◽  
Mass Distribution ◽  
Molar Mass ◽  
Molar Mass Distribution ◽  
Diffusion Data ◽  
Mass Distributions ◽  
Classical Diffusion ◽  
Polydisperse Polymer

The differences between the QELSS and classical diffusion coefficient of a polydisperse polymer resulting from distinct definitions of experimentally accessible average values are calculated for two assumed specific forms of molar mass distributions. Predicted deviations are compared with the experiment using NBS 706 standard polystyrene. QELSS Dz of this sample relates within 2-4% to the classical diffusion coefficient, if the Schulz-Zimm molar mass distribution is assumed to be valid. In general, differences between the height-area and QELSS diffusion coefficient of about 20% may be found for Mw/Mn ~ 2, and this value may increase above 35%, if strongly tailing molar mass distribution pertains to the sample.

Activities of Components in the Ca2MgSi2O7-CaSiO3Molten System

1996 ◽  
Vol 61 (6) ◽  
pp. 837-843
Author(s):  
Ladislav Kosa ◽  
Ivan Nerád ◽  
Katarína Adamkovičová ◽  
Jozef Strečko ◽  
Ivo Proks
Keyword(s):  
Gibbs Energy ◽  
Molar Mass ◽  
Excess Entropy ◽  
Enthalpy Of Mixing ◽  
Real Particle ◽  
Entropy Of Mixing ◽  
Energy Of Mixing ◽  
Gibbs Energy Of Mixing

Activities of the components, the Gibbs energy of mixing, and the excess entropy of mixing have been calculated for the Ca2MgSi2O7-CaSiO3 system. The mole fractions of the components were calculated assuming that in the point of the formal component Ca2MgSi2O7, the molar mass of the quasi-real particle in the melt corresponds to its formula molar mass, whereas in the point of the formal component CaSiO3 the molar mass of the quasi-real particle in the melt is 8.5 times higher than as corresponds to its formula. The fact that the enthalpy of mixing is zero whereas the excess entropy of mixing is non-zero suggests that Ca2MgSi2O7-CaSiO3 melts behave as athermal solutions.

Development and Characterization of Amine-Clay Hybrid Adsorbents for CO2 Capture

2016 ◽  
Vol 1133 ◽  
pp. 547-551 ◽  
Author(s):  
Ali E.I. Elkhalifah ◽  
Mohammad Azmi Bustam ◽  
Azmi Mohd Shariff ◽  
Sami Ullah ◽  
Nadia Riaz ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Surface Area ◽  
Surface Properties ◽  
Molar Mass ◽  
Adsorption Ability ◽  
Stepwise Increase ◽  
Inverse Effect ◽  
Bet Method ◽  
Sodium Form

The present work aims at a better understanding of the influences of the intercalated mono-, di- and triethanolamines on the characteristics and CO2 adsorption ability of sodium form of bentonite (Na-bentonite). The results revealed that the molar mass of intercalated amines significantly influenced the structural and surface properties as well as the CO2 adsorption capacity of Na-bentonite. In this respect, a stepwise increase in the d-spacing of Na-bentonite with the molar mass of amine was recorded by XRD technique. However, an inverse effect of the molar mass of amine on the surface area was confirmed by BET method. CO2 adsorption experiments on amine-bentonite hybrid adsorbents showed that the CO2 adsorption capacity inversly related to the molar mass of amine at 25 ͦC and 101 kPa. Accordingly, Na-bentonite modified by monoethanolammonium cations adsorbed as high as 0.475 mmol CO2/g compared to 0.148 and 0.087 mmol CO2/g for that one treated with di- and triethanolammonium cations, respectively.

scholarly journals Highly Efficient MOF Catalyst Systems for CO2 Conversion to Bis-Cyclic Carbonates as Building Blocks for NIPHUs (Non-Isocyanate Polyhydroxyurethanes) Synthesis

Catalysts ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 628
Author(s):  
Adolfo Benedito ◽  
Eider Acarreta ◽  
Enrique Giménez
Keyword(s):  
Molar Mass ◽  
Cycloaddition Reaction ◽  
Building Blocks ◽  
Catalyst System ◽  
Cyclic Carbonate ◽  
Ammonium Bromide ◽  
Cyclic Carbonates ◽  
High Molar Mass ◽  
Highly Efficient ◽  
Free Process

The present paper describes a greener sustainable route toward the synthesis of NIPHUs. We report a highly efficient solvent-free process to produce [4,4′-bi(1,3-dioxolane)]-2,2′-dione (BDC), involving CO2, as renewable feedstock, and bis-epoxide (1,3-butadiendiepoxide) using only metal–organic frameworks (MOFs) as catalysts and cetyltrimethyl-ammonium bromide (CTAB) as a co-catalyst. This synthetic procedure is evaluated in the context of reducing global emissions of waste CO2 and converting CO2 into useful chemical feedstocks. The reaction was carried out in a pressurized reactor at pressures of 30 bars and controlled temperatures of around 120–130 °C. This study examines how reaction parameters such as catalyst used, temperature, or reaction time can influence the molar mass, yield, or reactivity of BDC. High BDC reactivity is essential for producing high molar mass linear non-isocyanate polyhydroxyurethane (NIPHU) via melt-phase polyaddition with aliphatic diamines. The optimized Al-OH-fumarate catalyst system described in this paper exhibited a 78% GC-MS conversion for the desired cyclic carbonates, in the absence of a solvent and a 50 wt % chemically fixed CO2. The cycloaddition reaction could also be carried out in the absence of CTAB, although lower cyclic carbonate yields were observed.

Sign in / Sign up

Export Citation Format

Share Document