Transcrystalline Morphology of an in situ Microfibrillar Poly(ethylene terephthalate)/Poly(propylene) Blend Fabricated through a Slit Extrusion Hot Stretching-Quenching Process

2004 ◽  
Vol 25 (4) ◽  
pp. 553-558 ◽  
Author(s):  
Zhong-Ming Li ◽  
Liang-Bin Li ◽  
Kai-Zhi Shen ◽  
Wei Yang ◽  
Rui Huang ◽  
...  
Keyword(s):  
Ethylene Terephthalate ◽  
Poly Ethylene Terephthalate ◽  
Quenching Process ◽  
Poly Ethylene ◽  
Poly Propylene

Properties of Polymer Alloy Fibers of Polypropylene and Cationic Dyeable Poly(ethylene Terephthalate) Prepared with an in-situ Generated Compatibilizer

2001 ◽  
Vol 71 (12) ◽  
pp. 1053-1056 ◽  
Author(s):  
Yoichiro Muraoka ◽  
Tomoko Fujiwara ◽  
Yoshiyuki Sano ◽  
Tokugen Yasuda ◽  
Hajime Kanbara
Keyword(s):  
Ethylene Terephthalate ◽  
Poly Ethylene Terephthalate ◽  
Polymer Alloy ◽  
Poly Ethylene

scholarly journals Interfacial Adhesion and Mechanical Properties of PET Fabric/PVC Composites Enhanced by SiO2/Tributyl Citrate Hybrid Sizing

Nanomaterials ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 898
Author(s):  
Dandan Pu ◽  
Fuyao Liu ◽  
Yubing Dong ◽  
Qingqing Ni ◽  
Yaqin Fu
Keyword(s):  
Interfacial Adhesion ◽  
Ethylene Terephthalate ◽  
Sio2 Nanoparticles ◽  
New Approach ◽  
Pet Fabric ◽  
Poly Ethylene Terephthalate ◽  
Wide Range ◽  
Peeling Strength ◽  
Poly Ethylene

Poly(ethylene terephthalate) (PET) fabric-reinforced polyvinyl chloride (PVC) composites have a wide range of applications, but the interface bonding of PET fabric/PVC composites has remained a challenge. In this work, a new in-situ SiO2/tributyl citrate sizing agent was synthesized according to the principle of “similar compatibility.” The developed sizing agent was used as a PET surface modifier to enhance the interfacial performance of PET fabric/PVC composites. The morphology and structure of the PET filaments, the wettability and tensile properties of the PET fabric, the interfacial adhesion, and the tensile and tearing properties of the PET fabric/PVC composites were investigated. Experimental results showed that many SiO2 nanoparticles were scattered on the surface of the modified PET filaments. Moreover, the surface roughness of the modified PET filaments remarkably increased in comparison with that of the untreated PET filaments. The contact angle of the modified PET filaments was also smaller than that of the untreated ones. The peeling strength of the modified PET fabrics/PVC composites was 0.663 N/mm, which increased by 62.50% in comparison with the peeling strength of the untreated ones (0.408 N/mm). This work provides a new approach to the surface modification of PET and improves the properties of PET fabric/PVC composites.

scholarly journals Exploring Next-Generation Engineering Bioplastics: Poly(alkylene furanoate)/Poly(alkylene terephthalate) (PAF/PAT) Blends

Polymers ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 556 ◽  
Author(s):  
Nikki Poulopoulou ◽  
Nejib Kasmi ◽  
Maria Siampani ◽  
Zoi Terzopoulou ◽  
Dimitrios Bikiaris ◽  
...  
Keyword(s):  
Ethylene Terephthalate ◽  
Random Copolymers ◽  
Special Importance ◽  
Reactive Blending ◽  
Immiscible Blends ◽  
Solution Blending ◽  
Poly Ethylene Terephthalate ◽  
Different Types ◽  
Poly Ethylene ◽  
Poly Propylene

Polymers from renewable resources and especially strong engineering partially aromatic biobased polyesters are of special importance for the evolution of bioeconomy. The fabrication of polymer blends is a creative method for the production of tailor-made materials for advanced applications that are able to combine functionalities from both components. In this study, poly(alkylene furanoate)/poly(alkylene terephthalate) blends with different compositions were prepared by solution blending in a mixture of trifluoroacetic acid and chloroform. Three different types of blends were initially prepared, namely, poly(ethylene furanoate)/poly(ethylene terephthalate) (PEF/PET), poly(propylene furanoate)/poly(propylene terephthalate) (PPF/PPT), and poly(1,4-cyclohenedimethylene furanoate)/poly(1,4-cycloxehane terephthalate) (PCHDMF/PCHDMT). These blends’ miscibility characteristics were evaluated by examining the glass transition temperature of each blend. Moreover, reactive blending was utilized for the enhancement of miscibility and dynamic homogeneity and the formation of copolymers through transesterification reactions at high temperatures. PEF–PET and PPF–PPT blends formed a copolymer at relatively low reactive blending times. Finally, poly(ethylene terephthalate-co-ethylene furanoate) (PETF) random copolymers were successfully introduced as compatibilizers for the PEF/PET immiscible blends, which resulted in enhanced miscibility.

scholarly journals Effects of Phase Morphology on Mechanical Properties: Oriented/Unoriented PP Crystal Combination with Spherical/Microfibrillar PET Phase

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 248 ◽  
Author(s):  
Dashan Mi ◽  
Yingxiong Wang ◽  
Maja Kuzmanovic ◽  
Laurens Delva ◽  
Yixin Jiang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Ethylene Terephthalate ◽  
Phase Morphology ◽  
Mechanical Recycling ◽  
Immiscible Blends ◽  
Poly Ethylene Terephthalate ◽  
Poly Ethylene ◽  
The Impact

In situ microfibrillation and multiflow vibrate injection molding (MFVIM) technologies were combined to control the phase morphology of blended polypropylene (PP) and poly(ethylene terephthalate) (PET), wherein PP is the majority phase. Four kinds of phase structures were formed using different processing methods. As the PET content changes, the best choice of phase structure also changes. When the PP matrix is unoriented, oriented microfibrillar PET can increase the mechanical properties at an appropriate PET content. However, if the PP matrix is an oriented structure (shish-kebab), only the use of unoriented spherical PET can significantly improve the impact strength. Besides this, the compatibilizer polyolefin grafted maleic anhydride (POE-g-MA) can cover the PET in either spherical or microfibrillar shape to form a core–shell structure, which tends to improve both the yield and impact strength. We focused on the influence of all composing aspects—fibrillation of the dispersed PET, PP matrix crystalline morphology, and compatibilized interface—on the mechanical properties of PP/PET blends as well as potential synergies between these components. Overall, we provided a theoretical basis for the mechanical recycling of immiscible blends.

In Situ High Temperature X-Ray Diffraction Studies of Modified Poly(Ethylene Terephthalate)

1992 ◽  
Vol 36 ◽  
pp. 379-386
Author(s):  
T. Blanton ◽  
R. Seyler
Keyword(s):  
High Temperature ◽  
Ethylene Terephthalate ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
X Ray Scattering ◽  
Poly Ethylene Terephthalate ◽  
Poly Ethylene ◽  
Pet Crystallization

The effect of dimethyl-5-sodiosulfoisophthalate, SIP, on poly(ethylene terephthalate), PET, crystallization has been studied using in situ high-temperature x-ray diffraction, HTXRD. At low levels of SIP modification, PET-like crystallinity was observed. At high SIP levels, clustering of polyester ionomers was observed and crystallization was significantly suppressed. The HTXRD data along with differential scanning calorimetry, DSC, and small angle x-ray scattering, SAXS, indicate that the change from bulk crystallization to bulk ionomer formation occurred when 8-12 mol% of the diester linkages contained SIP.

Sign in / Sign up

Export Citation Format

Share Document