Effect of a Small Amount of Synthetic Fiber on Performance of Biocarbon‐Filled Nylon‐Based Hybrid Biocomposites

2021 ◽  
pp. 2000680
Author(s):  
Boon Peng Chang ◽  
Mohamed A. Abdelwahab ◽  
Alper Kiziltas ◽  
Deborah F. Mielewski ◽  
Amar K. Mohanty ◽  
...  
Keyword(s):  
Synthetic Fiber

scholarly journals Factors Affecting Acoustic Properties of Natural-Fiber-Based Materials and Composites: A Review

Textiles ◽  
2021 ◽  
Vol 1 (1) ◽  
pp. 55-85
Author(s):  
Tufail Hassan ◽  
Hafsa Jamshaid ◽  
Rajesh Mishra ◽  
Muhammad Qamar Khan ◽  
Michal Petru ◽  
...  
Keyword(s):  
Sound Absorption ◽  
Natural Fiber ◽  
Volume Fraction ◽  
Fiber Type ◽  
Alkali Treatment ◽  
Acoustic Properties ◽  
Synthetic Fiber ◽  
Sound Insulation ◽  
Factors Affecting ◽  
Wide Range

Recently, very rapid growth has been observed in the innovations and use of natural-fiber-based materials and composites for acoustic applications due to their environmentally friendly nature, low cost, and good acoustic absorption capability. However, there are still challenges for researchers to improve the mechanical and acoustic properties of natural fiber composites. In contrast, synthetic fiber-based composites have good mechanical properties and can be used in a wide range of structural and automotive applications. This review aims to provide a short overview of the different factors that affect the acoustic properties of natural-fiber-based materials and composites. The various factors that influence acoustic performance are fiber type, fineness, length, orientation, density, volume fraction in the composite, thickness, level of compression, and design. The details of various factors affecting the acoustic behavior of the fiber-based composites are described. Natural-fiber-based composites exhibit relatively good sound absorption capability due to their porous structure. Surface modification by alkali treatment can enhance the sound absorption performance. These materials can be used in buildings and interiors for efficient sound insulation.

scholarly journals Characterization of a new natural fiber extracted from Corypha taliera fruit

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Taslima Ahmed Tamanna ◽  
Shah Alimuzzaman Belal ◽  
Mohammad Abul Hasan Shibly ◽  
Ayub Nabi Khan
Keyword(s):  
Tensile Strength ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Morphological Characteristics ◽  
Synthetic Fiber ◽  
X Ray Diffraction ◽  
Reinforced Composite ◽  
Potential Alternative

AbstractThis study deals with the determination of new natural fibers extracted from the Corypha taliera fruit (CTF) and its characteristics were reported for the potential alternative of harmful synthetic fiber. The physical, chemical, mechanical, thermal, and morphological characteristics were investigated for CTF fibers. X-ray diffraction and chemical composition characterization ensured a higher amount of cellulose (55.1 wt%) content and crystallinity (62.5%) in the CTF fiber. The FTIR analysis ensured the different functional groups of cellulose, hemicellulose, and lignin present in the fiber. The Scherrer’s equation was used to determine crystallite size 1.45 nm. The mean diameter, specific density, and linear density of the CTF fiber were found (average) 131 μm, 0.86 g/cc, and 43 Tex, respectively. The maximum tensile strength was obtained 53.55 MPa for GL 20 mm and Young’s modulus 572.21 MPa for GL 30 mm. The required energy at break was recorded during the tensile strength experiment from the tensile strength tester and the average values for GL 20 mm and GL 30 mm are 0.05381 J and 0.08968 J, respectively. The thermal analysis ensured the thermal sustainability of CTF fiber up to 230 °C. Entirely the aforementioned outcomes ensured that the new CTF fiber is the expected reinforcement to the fiber-reinforced composite materials.

Synthetic Fiber Granuloma of the Conjunctiva

1985 ◽  
Vol 99 (5) ◽  
pp. 598-600 ◽  
Author(s):  
Jerry A. Shields ◽  
James J. Augsburger ◽  
John Stechschulte ◽  
Michael Repka
Keyword(s):  
Synthetic Fiber

Thermal failure mechanism of fiber ropes when bent over sheaves

2018 ◽  
Vol 89 (7) ◽  
pp. 1215-1223
Author(s):  
Fanggang Ning ◽  
Xiaoru Li ◽  
Nick O Hear ◽  
Rong Zhou ◽  
Chuan Shi ◽  
...  
Keyword(s):  
Failure Mechanism ◽  
Thermal Damage ◽  
Synthetic Fiber ◽  
Heat Accumulation ◽  
Thermal Failure ◽  
Synthetic Fibers ◽  
Test Conditions ◽  
Bending Process ◽  
Higher Temperature ◽  
Bending Failure

Thermal damage is an important failure mechanism that affects the bending failure of fiber ropes. This is relevant because synthetic fibers often have a relatively low melting point and low thermal conductivity. In cyclic bending over sheave (CBOS), the heat generated by friction and deformation is not conducted rapidly to the external environment, and the temperature of the rope core increases quickly. This higher temperature greatly reduces the mechanical properties of the fiber, thus accelerating the final rope failure. In this paper, evidence of thermal damage in the bending process of a braided synthetic fiber rope is given. The test conditions inducing thermal damage are discussed, including stress level, bending frequency and diameter ratio. The reasons for the heat generation and the dynamic process of heat accumulation inside the rope during CBOS are also discussed. This study aims to provide theoretical and experimental guidance for the design and use of fiber rope.

Performance of Bamboo Fiber Reinforced Composites: Mechanical Properties

2021 ◽  
Vol 879 ◽  
pp. 284-293
Author(s):  
Norliana Bakar ◽  
Siew Choo Chin
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Vinyl Ester ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Bamboo Fiber ◽  
Synthetic Fiber ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Volume Fractions

Fiber Reinforced Polymer (FRP) made from synthetic fiber had been widely used for strengthening of reinforced concrete (RC) structures in the past decades. Due to its high cost, detrimental to the environment and human health, natural fiber composites becoming the current alternatives towards a green and environmental friendly material. This paper presents an investigation on the mechanical properties of bamboo fiber reinforced composite (BFRC) with different types of resins. The BFRC specimens were prepared by hand lay-up method using epoxy and vinyl-ester resins. Bamboo fiber volume fractions, 30%, 35%, 40%, 45% and 50% was experimentally investigated by conducting tensile and flexural test, respectively. Results showed that the tensile and flexural strength of bamboo fiber reinforced epoxy composite (BFREC) was 63.2% greater than the bamboo fiber reinforced vinyl-ester composite (BFRVC). It was found that 45% of bamboo fiber volume fraction on BFREC exhibited the highest tensile strength compared to other BFRECs. Meanwhile, 40% bamboo fiber volume fraction of BFRVC showed the highest tensile strength between bamboo fiber volume fractions for BFRC using vinyl-ester resin. Studies showed that epoxy-based BFRC exhibited excellent results compared to the vinyl-ester-based composite. Further studies are required on using BFRC epoxy-based composite in various structural applications and strengthening purposes.

Sign in / Sign up

Export Citation Format

Share Document