Friction and Mechanical Properties of Highly Filled Polybenzoxazine Composites: Nanosilica Particle Size and Surface Treatment

2018 ◽  
Vol 220 (1) ◽  
pp. 1800328 ◽  
Author(s):  
Phattarin Mora ◽  
Chanchira Jubsilp ◽  
Nutthaphon Liawthanyarat ◽  
Manunya Okhawilai ◽  
Sarawut Rimdusit
Keyword(s):  
Mechanical Properties ◽  
Particle Size ◽  
Surface Treatment ◽  
Nanosilica Particle

Effect of particle size, fiber content, and surface treatment on the mechanical properties of maple-reinforced LLDPE produced by rotational molding

2020 ◽  
pp. 096739112091660
Author(s):  
Fatima Ezzahra Hanana ◽  
Denis Rodrigue
Keyword(s):  
Mechanical Properties ◽  
Particle Size ◽  
Surface Treatment ◽  
Tensile Modulus ◽  
Complete Characterization ◽  
Fiber Content ◽  
Wood Fibers ◽  
Interface Quality ◽  
Effect Of Particle Size ◽  
The Impact

In this work, composites based on linear low-density polyethylene and maple wood fibers with and without surface treatment with maleated polyethylene (MAPE) were prepared by dry blending, followed by rotomolding to study the effect of particle size, fiber content, and surface treatment. From the samples produced, a complete characterization of the morphological and mechanical properties was performed. The results obtained showed that MAPE surface treatment improved the fiber–matrix interface quality, which improved the homogeneity, the thermal stability, and the mechanical properties of the composites. The results showed that the effect of particle size was significant as the tensile modulus increased by 7%, 40%, and 73% for 125–250, 250–355, and 355–500 µm at 30 wt% of maple fibers. The tensile strength also increased by 114% at the same fiber loading (30 wt%) when the particle size increased from 125–250 µm to 355–500 μm. Finally, the impact strength with 355–500 µm particles was 52% higher than for 125–250 µm particles at 30 wt%

KAISER ALUMINUM ALLOY 7049

Alloy Digest ◽  
1999 ◽  
Vol 48 (12) ◽  
Keyword(s):  
Mechanical Properties ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Stress Corrosion Cracking ◽  
Heat Treating ◽  
Kaiser Aluminum ◽  
Resistance To Stress ◽  
Structural Parts

Abstract Kaiser Aluminum Alloy 7049 has high mechanical properties and good machinability. The alloy offers a resistance to stress-corrosion cracking and is typically used in aircraft structural parts. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fatigue. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: AL-365. Producer or source: Tennalum, A Division of Kaiser Aluminum.

KAISER ALUMINUM ALLOY KA62

Alloy Digest ◽  
1999 ◽  
Vol 48 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Physical And Mechanical Properties ◽  
Heat Treating ◽  
Lead Free ◽  
Kaiser Aluminum

Abstract Kaiser Aluminum alloy KA62 (Tennalum alloy KA62) is a lead-free alternative to 6262. It offers good machinability and corrosion resistance and displays good acceptance of coatings (anodize response). It can be used in place of 6262 because its physical and mechanical properties are equivalent to those of 6262 (see Alloy Digest Al-361, September 1999). This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: AL-362. Producer or source: Tennalum, A Division of Kaiser Aluminum.

WC-3015 Alloy

Alloy Digest ◽  
1974 ◽  
Vol 23 (5) ◽  
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Base Alloy ◽  
Heat Treating ◽  
Rolled Sheet ◽  
Good Oxidation Resistance ◽  
Structural Applications ◽  
Cold Rolled

Abstract WC-3015 is a columbium-base alloy developed for structural applications in high-temperature oxidizing environments. It is characterized by good oxidation resistance, good mechanical properties and compatibility with silicide coatings. Cold-rolled sheet can be joined and welded without cracking. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: Cb-21. Producer or source: Wah Chang, a Teledyne Corporation.

scholarly journals Experimental Analysis of the Mechanical Properties and Resistivity of Tectonic Coal Samples with Different Particle Sizes

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2303
Author(s):  
Congyu Zhong ◽  
Liwen Cao ◽  
Jishi Geng ◽  
Zhihao Jiang ◽  
Shuai Zhang
Keyword(s):  
Mechanical Properties ◽  
Particle Size ◽  
Compressive Strength ◽  
Elastic Modulus ◽  
Uniaxial Compressive Strength ◽  
Coalbed Methane ◽  
Coal Sample ◽  
Fine Particles ◽  
Particle Sizes ◽  
Tectonic Coal

Because of its weak cementation and abundant pores and cracks, it is difficult to obtain suitable samples of tectonic coal to test its mechanical properties. Therefore, the research and development of coalbed methane drilling and mining technology are restricted. In this study, tectonic coal samples are remodeled with different particle sizes to test the mechanical parameters and loading resistivity. The research results show that the particle size and gradation of tectonic coal significantly impact its uniaxial compressive strength and elastic modulus and affect changes in resistivity. As the converted particle size increases, the uniaxial compressive strength and elastic modulus decrease first and then tend to remain unchanged. The strength of the single-particle gradation coal sample decreases from 0.867 to 0.433 MPa and the elastic modulus decreases from 59.28 to 41.63 MPa with increasing particle size. The change in resistivity of the coal sample increases with increasing particle size, and the degree of resistivity variation decreases during the coal sample failure stage. In composite-particle gradation, the proportion of fine particles in the tectonic coal sample increases from 33% to 80%. Its strength and elastic modulus increase from 0.996 to 1.31 MPa and 83.96 to 125.4 MPa, respectively, and the resistivity change degree decreases. The proportion of medium particles or coarse particles increases, and the sample strength, elastic modulus, and resistivity changes all decrease.

scholarly journals Influences of B4C content and particle size on the mechanical properties of hot pressed TiB2–B4C composites

2021 ◽  
pp. 1-9
Author(s):  
Jun Zhao ◽  
Qinggui Li ◽  
Weixiao Cao ◽  
Zetan Liu ◽  
Xiangong Deng ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Particle Size
Sign in / Sign up

Export Citation Format

Share Document