The Interaction Between Amphiphilic Polymer Materials and Guest Molecules: Selective Adsorption and Its Related Applications

2014 ◽  
Vol 215 (23) ◽  
pp. 2283-2294 ◽  
Author(s):  
Bing Yu ◽  
Xuesong Jiang ◽  
Jie Yin
Keyword(s):  
Selective Adsorption ◽  
Amphiphilic Polymer ◽  
Polymer Materials ◽  
Guest Molecules

Supramolecular Networks of Hyperbranched Poly(ether amine) (hPEA) Nanogel/Chitosan (CS) for the Selective Adsorption and Separation of Guest Molecules

2015 ◽  
Vol 48 (7) ◽  
pp. 2022-2029 ◽  
Author(s):  
Jin Li ◽  
Zhilong Su ◽  
Hongjie Xu ◽  
Xiaodong Ma ◽  
Jie Yin ◽  
...  
Keyword(s):  
Selective Adsorption ◽  
Guest Molecules ◽  
Hyperbranched Poly ◽  
Supramolecular Networks

scholarly journals Potential Adsorption of Heavy Metal Ions by Eugenol Compounds and Derivatives through Ion Imprinted Polymer

2019 ◽  
Vol 22 (6) ◽  
pp. 263-268 ◽  
Author(s):  
Muhammad Cholid Djunaidi ◽  
Khabibi Khabibi
Keyword(s):  
Selective Adsorption ◽  
Base Material ◽  
Polymer Materials ◽  
Ion Imprinted Polymer ◽  
Imprinted Polymer ◽  
Adsorption Method ◽  
Functional Monomers ◽  
Ion Imprinted ◽  
Carcinogenic Substances ◽  
Main Components

Research on the potential of Ion Imprinted Polymer (IIP) selective adsorption of heavy metals using eugenol compounds and their derivatives has been carried out. Isolation and synthesis of eugenol derivatives with metal selective active groups and their use as selective metal carriers have been carried out with satisfactory results. Carrier effectiveness can still be improved by methods that focus on the target molecule recognition model. This adsorption method is called Ion Imprinted Polymer (IIP). The main components of IIP are functional monomers, crosslinkers, and target molecules. The use of acrylamide and its derivatives as functional monomers is useful with a lot of success achieved but also invites danger because it includes carcinogenic substances, a nerve poison, and so on. Moreover, the N group, which is an active acrylamide group, and its derivatives are only selective towards borderline metals (HSAB theory). Alternatives that are safe and can increase their selectivity are therefore needed. Eugenol, with its three potential functional groups, is believed to be able to replace the function of acrylamide and its derivatives that can even increase the effectiveness of IIP. The purpose of this study is to determine the potential of eugenol derivatives as selective adsorbents through the IIP method. This synthesis of IIP involved the use of basic ingredients of eugenol and its derivatives (polyeugenol, EOA, polyacetate). Each base material is contacted with a metal template then crosslinked with three kinds of crosslinking agents, namely EGDMA, DVB, and bisphenol. IIP is formed after the metal template is released using acid/HCl. The outcomes obtained demonstrate that the IIP method is able to increase the metal adsorption capacity and that the IIP method for metals is largely determined by the release of metals, which will form a hole for metal entry through adsorption. Poly-Cd-DVB, Eug-Cr-DVB, Poly-Cu-bisphenol, Polyacetate -Cr-DVB are polymer materials that have the potential to make up an IIP.

A porous magnesium metal–organic framework showing selective adsorption and separation of nitrile guest molecules

RSC Advances ◽  
2016 ◽  
Vol 6 (106) ◽  
pp. 104451-104455 ◽  
Author(s):  
Jin Xu ◽  
Yang Yu ◽  
Guanghua Li ◽  
Shanshan Wang ◽  
Yongxin Liu ◽  
...  
Keyword(s):  
Selective Adsorption ◽  
Metal Organic Framework ◽  
Guest Molecules ◽  
Magnesium Metal ◽  
Reversible Adsorption ◽  
Metal Organic ◽  
Porous Magnesium ◽  
Organic Framework

Selective and reversible adsorption of nitrile guest molecules including MeCN, ACN, AN and CTN on a Mg-based MOF were reported. Interestingly, the Mg-based MOF selectively captured cis-CTN into its cavity from a mixture of cis- and trans-isomers.

Electron-diffraction studies in synthetic polymer materials

1983 ◽  
Vol 41 ◽  
pp. 362-365
Author(s):  
D.T. Grubb
Keyword(s):  
Electron Diffraction ◽  
Synthetic Polymer ◽  
Polymer Materials ◽  
Crystallographic Structure ◽  
High Dose ◽  
Electron Dose ◽  
Dose Rates ◽  
First Case ◽  
Diffraction Patterns ◽  
The Many

Diffraction studies in polymeric and other beam sensitive materials may bring to mind the many experiments where diffracted intensity has been used as a measure of the electron dose required to destroy fine structure in the TEM. But this paper is concerned with a range of cases where the diffraction pattern itself contains the important information.In the first case, electron diffraction from paraffins, degraded polyethylene and polyethylene single crystals, all the samples are highly ordered, and their crystallographic structure is well known. The diffraction patterns fade on irradiation and may also change considerably in a-spacing, increasing the unit cell volume on irradiation. The effect is large and continuous far C94H190 paraffin and for PE, while for shorter chains to C 28H58 the change is less, levelling off at high dose, Fig.l. It is also found that the change in a-spacing increases at higher dose rates and at higher irradiation temperatures.

Structure-property relationships of PE/PP sandwiched films

1987 ◽  
Vol 45 ◽  
pp. 454-455
Author(s):  
J. Petermann ◽  
G. Broza ◽  
U. Rieck ◽  
A. Jaballah ◽  
A. Kawaguchi
Keyword(s):  
Mechanical Tests ◽  
Polymer Materials ◽  
Ionic Crystals ◽  
Structure Property ◽  
Polymer Systems ◽  
Structure Property Relationships ◽  
Oriented Films ◽  
Materials Used ◽  
Polymer Laminates ◽  
Heated Glass

Oriented overgrowth of polymer materials onto ionic crystals is well known and recently it was demonstrated that this epitaxial crystallisation can also occur in polymer/polymer systems, under certain conditions. The morphologies and the resulting physical properties of such systems will be presented, especially the influence of epitaxial interfaces on the adhesion of polymer laminates and the mechanical properties of epitaxially crystallized sandwiched layers.Materials used were polyethylene, PE, Lupolen 6021 DX (HDPE) and 1810 D (LDPE) from BASF AG; polypropylene, PP, (PPN) provided by Höchst AG and polybutene-1, PB-1, Vestolen BT from Chemische Werke Hüls. Thin oriented films were prepared according to the method of Petermann and Gohil, by winding up two different polymer films from two separately heated glass-plates simultaneously with the help of a motor driven cylinder. One double layer was used for TEM investigations, while about 1000 sandwiched layers were taken for mechanical tests.

Atom-probe analysis of the solid-liquid interface

1995 ◽  
Vol 53 ◽  
pp. 676-677
Author(s):  
J.A. Panitz
Keyword(s):  
Molecular Level ◽  
Selective Adsorption ◽  
Electronic Devices ◽  
Atom Probe ◽  
Chemical Agent ◽  
Hostile Environment ◽  
Solid Interface ◽  
Solid Liquid Interface ◽  
Solid Liquid ◽  
Chemically Selective

The first few atomic layers of a solid can form a barrier between its interior and an often hostile environment. Although adsorption at the vacuum-solid interface has been studied in great detail, little is known about adsorption at the liquid-solid interface. Adsorption at a liquid-solid interface is of intrinsic interest, and is of technological importance because it provides a way to coat a surface with monolayer or multilayer structures. A pinhole free monolayer (with a reasonable dielectric constant) could lead to the development of nanoscale capacitors with unique characteristics and lithographic resists that surpass the resolution of their conventional counterparts. Chemically selective adsorption is of particular interest because it can be used to passivate a surface from external modification or change the wear and the lubrication properties of a surface to reflect new and useful properties. Immunochemical adsorption could be used to fabricate novel molecular electronic devices or to construct small, “smart”, unobtrusive sensors with the potential to detect a wide variety of preselected species at the molecular level. These might include a particular carcinogen in the environment, a specific type of explosive, a chemical agent, a virus, or even a tumor in the human body.

Electron spectroscopic imaging (ESI) on multiphase polymer materials

1989 ◽  
Vol 47 ◽  
pp. 348-349
Author(s):  
H.-J. Cantow ◽  
M. Kunz ◽  
M. Möller
Keyword(s):  
Energy Loss ◽  
Melt Spinning ◽  
Chromatic Aberration ◽  
Element Distribution ◽  
Polymer Materials ◽  
Specific Energy Loss ◽  
Transmission Electron ◽  
Multicomponent Polymer ◽  
Diffraction Patterns ◽  
Image Planes

In transmission electron microscopy the natural contrast of polymers is very low. Thus the contrast has to be enhanced by staining with heavy metals. The resolution is limited by the size of the staining particles and by the fact that electrons with different energy are focused in different image planes due to the chromatic aberration of the magnetic lenses. The integration of an electron energy loss spectrometer into the optical coloumn of a transmission electron microscope offers the possibility to use monoenergetic electrons and to select electrons with a certain energy for imaging. Thus contrast and resolution are enhanced. By imaging only electrons with an element specific energy loss the element distribution in the sample can be obtained. In addition, elastic bright field images and diffraction patterns yield excellent resolution. Some applications of the method on multicomponent polymer materials are discussed.Bulk polymer samples were prepared by ultramicrotoming at room temperature or well below the glass transition temperature. Very thin films for the direct observation of the structure in semicrystalline polymers were obtained by melt-spinning. Specimens were examined with a ZEISS CEM 902 operated at 80 kV.

Quantitative high-resolution electron microscopy (HREM) of defects in ordered polymers

1996 ◽  
Vol 54 ◽  
pp. 166-167
Author(s):  
Patricia M. Wilson ◽  
David C. Martin
Keyword(s):  
Electron Microscopy ◽  
Electron Beam ◽  
High Resolution ◽  
Liquid Crystalline ◽  
High Resolution Electron Microscopy ◽  
Polymer Materials ◽  
Scattered Electron ◽  
Crystalline Polymers ◽  
Resolution Electron ◽  
Beam Damage

Efforts in our laboratory and elsewhere have established the utility of low dose high resolution electron microscopy (HREM) for imaging the microstructure of crystalline and liquid crystalline polymers. In a number of polymer systems, direct imaging of the lattice spacings by HREM has provided information about the size, shape, and relative orientation of ordered domains in these materials. However, because of the extent of disorder typical in many polymer microstructures, and because of the sensitivity of most polymer materials to electron beam damage, there have been few studies where the contrast observed in HREM images has been analyzed in a quantitative fashion.Here, we discuss two instances where quantitative information about HREM images has been used to provide new insight about the organization of crystalline polymers in the solid-state. In the first, we study the distortion of the polymer lattice planes near the core of an edge dislocation and compare these results to theories of dislocations in anisotropic and liquid crystalline solids. In the second, we investigate the variations in HREM contrast near the edge of wedge-shaped samples. The polymer used in this study was the diacetylene DCHD, which is stable to electron beam damage (Jc = 20 C/cm2) and highly crystalline. The instrument used in this work was a JEOL 4000 EX HRTEM with a beam blanidng device. More recently, the 4000 EX has been installed with instrumentation for dynamically recording scattered electron beam currents.

Sign in / Sign up

Export Citation Format

Share Document