Antimicrobial and self‐crosslinking potential of experimentally developed dioctadecyldimethyl ammonium bromide and riboflavin dentin adhesive

2021 ◽  
Author(s):  
Umer Daood ◽  
Ammar Abdullah Malik ◽  
Muhammad Sharjeel Ilyas ◽  
Asrar Ahmed ◽  
Syed Saad B. Qasim ◽  
...  
Keyword(s):  
Ammonium Bromide ◽  
Dentin Adhesive

Gum arabic helps prepare better lacey polymer films for specimen support in electron microscopy

1993 ◽  
Vol 51 ◽  
pp. 240-241
Author(s):  
Shailesh R. Sheth ◽  
Jayesh R. Bellare
Keyword(s):  
Electron Microscopy ◽  
Polymer Films ◽  
Gum Arabic ◽  
Complete Removal ◽  
Ammonium Bromide ◽  
Release Agent ◽  
Astigmatism Correction ◽  
Long Time ◽  
Micro Holes ◽  
Cetyl Trimethyl Ammonium

Specimen support and astigmatism correction in Electron Microscopy are at least two areas in which lacey polymer films find extensive applications. Although their preparation has been studied for a very long time, present techniques still suffer from incomplete release of the film from its substrate and presence of a large number of pseudo holes in the film. Our method ensures complete removal of the entire lacey film from the substrate and fewer pseudo holes by pre-treating the substrate with Gum Arabic, which acts as a film release agent.The method is based on the classical condensation technique for preparing lacey films which is essentially deposition of minute water or ice droplets on the substrate and laying the polymer film over it, so that micro holes are formed corresponding to the droplets. A microscope glass slide (the substrate) is immersed in 2.0% (w/v) aq. CTAB (cetyl trimethyl ammonium bromide)-0.22% (w/v) aq.

The Effects of Amines on the Esterase Activities of Thrombin and Thrombokinase and on Several Clotting Tests

1974 ◽  
Vol 31 (02) ◽  
pp. 309-318
Author(s):  
Phyllis S Roberts ◽  
Raphael M Ottenbrite ◽  
Patricia B Fleming ◽  
James Wigand
Keyword(s):  
Choline Chloride ◽  
Polymerization Process ◽  
Ammonium Bromide ◽  
Bovine Thrombin ◽  
One Stage ◽  
Human Proteins ◽  
Rate Of Hydrolysis ◽  
The One ◽  
Hydrolysis Of Esters ◽  
Hydrolysis Of

Summary1. Choline chloride, 0.1 M (in 0.25 M Tris. HCl buffer, pH 7.4 or 8.0, 37°), doubles the rate of hydrolysis of TAME by bovine thrombokinase but has no effect on the hydrolysis of this ester by either human or bovine thrombin. Only when 1.0 M or more choline chloride is present is the hydrolysis of BAME by thrombokinase or thrombin weakly inhibited. Evidence is presented that shows that these effects are due to the quaternary amine group.2. Tetramethyl ammonium bromide or chloride has about the same effects on the hydrolysis of esters by these enzymes as does choline chloride but tetra-ethyl, -n.propyl and -n.butyl ammonium bromides (0.1 M) are stronger accelerators of the thrombokinase-TAME reaction and they also accelerate, but to a lesser degree, the thrombin-TAME reaction. In addition, they inhibit the hydrolysis of BAME by both enzymes. Their effects on these reactions, however, do not follow any regular order. The tetraethyl compound is the strongest accelerator of the thrombokinase-TAME reaction but the tetra-ethyl and -butyl compounds are the strongest accelerators of the thrombin-TAME reaction. The ethyl and propyl compounds are the best (although weak) inhibitors of the thrombokinase-BAME and the propyl compound of the thrombin-BAME reactions.3. Tetra-methyl, -ethyl, -n.propyl and -n.butyl ammonium bromides (0.01 M) inhibit the clotting of fibrinogen by thrombin (bovine and human proteins) at pH 7.4, imidazole or pH 6.1, phosphate buffers and they also inhibit, but to a lesser degree, a modified one-stage prothrombin test. In all cases the inhibition increases regularly as the size of the alkyl group increases from methyl to butyl. Only the ethyl com pound (0.025 M but not 0.01 M), however, significantly inhibits the polymerization of bovine fibrin monomers. It was concluded that inhibition of the fibrinogen-thrombin and the one-stage tests by the quaternary amines is not due to any effect of the com pounds on the polymerization process but probably due to inhibition of thrombin’s action on fibrinogen by the quaternary amines.

Using of modified-bentonite as low-cost sorbent for removal of methylene blue dye from aqueous solution

2020 ◽  
Vol 27 (2) ◽  
pp. 45-54
Author(s):  
Saraa Muwafaq Ibrahim ◽  
Ziad T. Abd Ali
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Silanol Group ◽  
Infrared Spectrometry ◽  
Blue Dye ◽  
Ammonium Bromide ◽  
Vibration Band ◽  
Order Kinetic ◽  
Methylene Blue Dye ◽  
Modified Bentonite

Batch experiments have been studied to remove methylene blue dye (MB) from aqueous solution using modified bentonite. The modified bentonite was synthesized by replacing exchangeable calcium cations in natural bentonite with cationic surfactant cetyl trimethyl ammonium bromide (CTAB). The characteristics of modified bentonite were studied using different analysis such as Scanning electronic microscopy (SEM), Fourier transform infrared spectrometry (FTIR) and surface area. Where SEM shows the natural bentonite has a porous structure, a rough and uneven appearance with scattered and different block structure sizes, while the modified bentonite surface morphology was smooth and supplemented by a limited number of holes. On other hand, (FTIR) analysis that proved NH group aliphatic and aromatic group of MB and silanol group are responsible for the sorption of contaminate. The organic matter peaks at 2848 and 2930 cm-1 in the spectra of modified bentonite which are sharper than those of the natural bentonite were assigned to the CH2 scissor vibration band and the symmetrical CH3 stretching absorption band, respectively, also the 2930 cm-1 peak is assigned to CH stretching band. The batch study was provided the maximum removal efficiency (99.99 % MB) with a sorption capacity of 129.87 mg/g at specified conditions (100 mg/L, 25℃, pH 11 and 250rpm). The sorption isotherm data fitted well with the Freundlich isotherm model. The kinetic studies were revealed that the sorption follows a pseudo-second-order kinetic model which indicates chemisorption between sorbent and sorbate molecules.

Seed-mediated synthesis and PEG coating of gold nanoparticles for controlling morphology and sizes

MRS Advances ◽  
2020 ◽  
Vol 5 (63) ◽  
pp. 3353-3360
Author(s):  
Susana Helena Arellano Ramírez ◽  
Perla García Casillas ◽  
Christian Chapa González
Keyword(s):  
Gold Nanoparticles ◽  
Polyethylene Glycol ◽  
Room Temperature ◽  
Colloidal Stability ◽  
Infrared Spectrometry ◽  
Ammonium Bromide ◽  
Chloroauric Acid ◽  
Vis Spectroscopy ◽  
Seed Mediated ◽  
Peg Coating

AbstractA significant area of research is biomedical applications of nanoparticles which involves efforts to control the physicochemical properties through simple and scalable processes. Gold nanoparticles have received considerable attention due to their unique properties that they exhibit based on their morphology. Gold nanospheres (AuNSs) and nanorods (AuNRs) were prepared with a seed-mediated method followed of polyethylene glycol (PEG)-coating. The seeds were prepared with 0.1 M cetyltrimethyl-ammonium bromide (CTAB), 0.005 M chloroauric acid (HAuCl4), and 0.01 M sodium borohydride (NaBH4) solution. Gold nanoparticles with spherical morphology was achieved by growth by aggregation at room temperature, while to achieve the rod morphology 0.1 M silver nitrate (AgNO3) and 0.1 M ascorbic acid solution were added. The gold nanoparticles obtained by the seed-mediated synthesis have spherical or rod shapes, depending on the experimental conditions, and a uniform particle size. Surface functionalization was developed using polyethylene glycol. Morphology, and size distribution of AuNPs were evaluated by Field Emission Scanning Electron Microscopy. The average size of AuNSs, and AuNRs was 7.85nm and 7.96 x 31.47nm respectively. Fourier transform infrared spectrometry was performed to corroborate the presence of PEG in the AuNPs surface. Additionally, suspensions of AuNSs and AuNRs were evaluated by UV-Vis spectroscopy. Gold nanoparticles were stored for several days at room temperature and it was observed that the colloidal stability increased once gold nanoparticles were coated with PEG due to the shield formed in the surface of the NPs and the increase in size which were 9.65±1.90 nm of diameter for AuNSs and for AuNRs were 29.03±5.88 and 8.39±1.02 nm for length and transverse axis, respectively.

A New Polyethylene Corrosion Protecting Coating with Ion Selectivity

2011 ◽  
Vol 314-316 ◽  
pp. 273-278
Author(s):  
Yu Hua Dong ◽  
Ke Ren ◽  
Qiong Zhou
Keyword(s):  
Ion Selectivity ◽  
Nano Particles ◽  
Ammonium Bromide ◽  
Linear Low Density Polyethylene ◽  
X Ray Diffraction ◽  
Sulfosalicylic Acid ◽  
X Ray ◽  
Chemically Modified ◽  
Before And After ◽  
Industrial Standards

Linear low density polyethylene (LLDPE) was chemically modified with grafting maleic anhydride (MAH) monomer on its backbone by melting blending. Nano-particles SiO2 was modified by cationic surfactant hexadecyl trimethyl ammonium bromide (CTAB) and anionic surfactant sulfosalicylic acid (SSA) and added to PE coating respectively. Measurement of membrane potential showed that the coating containing modified SiO2 nano-particles had characteristic of ion selectivity. The properties of the different coatings were investigated according to relative industrial standards. Experimental results indicated that PE coating with ion selectivity had better performances, such as adhesion strength, cathodic disbonding and anti-corrosion, than those of coating without ion selectivity. Crystal structure of the coatings before and after alkali corrosion was characterized by Fourier transform infrared spectra (FTIR) and X-ray diffraction (XRD). Structure of the coating without ion selectivity was damaged by NaOH alkali solution, causing mechanical properties being decreased. And the structure of the ion selective coatings was not affected.

scholarly journals Highly Efficient MOF Catalyst Systems for CO2 Conversion to Bis-Cyclic Carbonates as Building Blocks for NIPHUs (Non-Isocyanate Polyhydroxyurethanes) Synthesis

Catalysts ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 628
Author(s):  
Adolfo Benedito ◽  
Eider Acarreta ◽  
Enrique Giménez
Keyword(s):  
Molar Mass ◽  
Cycloaddition Reaction ◽  
Building Blocks ◽  
Catalyst System ◽  
Cyclic Carbonate ◽  
Ammonium Bromide ◽  
Cyclic Carbonates ◽  
High Molar Mass ◽  
Highly Efficient ◽  
Free Process

The present paper describes a greener sustainable route toward the synthesis of NIPHUs. We report a highly efficient solvent-free process to produce [4,4′-bi(1,3-dioxolane)]-2,2′-dione (BDC), involving CO2, as renewable feedstock, and bis-epoxide (1,3-butadiendiepoxide) using only metal–organic frameworks (MOFs) as catalysts and cetyltrimethyl-ammonium bromide (CTAB) as a co-catalyst. This synthetic procedure is evaluated in the context of reducing global emissions of waste CO2 and converting CO2 into useful chemical feedstocks. The reaction was carried out in a pressurized reactor at pressures of 30 bars and controlled temperatures of around 120–130 °C. This study examines how reaction parameters such as catalyst used, temperature, or reaction time can influence the molar mass, yield, or reactivity of BDC. High BDC reactivity is essential for producing high molar mass linear non-isocyanate polyhydroxyurethane (NIPHU) via melt-phase polyaddition with aliphatic diamines. The optimized Al-OH-fumarate catalyst system described in this paper exhibited a 78% GC-MS conversion for the desired cyclic carbonates, in the absence of a solvent and a 50 wt % chemically fixed CO2. The cycloaddition reaction could also be carried out in the absence of CTAB, although lower cyclic carbonate yields were observed.

scholarly journals Generation of highly amenable cellulose-Iβ via selective delignification of rice straw using a reusable cyclic ether-assisted deep eutectic solvent system

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Chiranjeevi Thulluri ◽  
Ravi Balasubramaniam ◽  
Harshad Ravindra Velankar
Keyword(s):  
Enzymatic Hydrolysis ◽  
Rice Straw ◽  
Deep Eutectic Solvent ◽  
Solvent System ◽  
Cyclic Ether ◽  
Cellulolytic Enzymes ◽  
Ammonium Bromide ◽  
Selective Delignification ◽  
Cellulose Iβ ◽  
Hydrolysis Of

AbstractCellulolytic enzymes can readily access the cellulosic component of lignocellulosic biomass after the removal of lignin during biomass pretreatment. The enzymatic hydrolysis of cellulose is necessary for generating monomeric sugars, which are then fermented into ethanol. In our study, a combination of a deep eutectic (DE) mixture (of 2-aminoethanol and tetra-n-butyl ammonium bromide) and a cyclic ether (tetrahydrofuran) was used for selective delignification of rice straw (RS) under mild conditions (100 °C). Pretreatment with DE-THF solvent system caused ~ 46% delignification whereas cellulose (~ 91%) and hemicellulose (~ 67%) recoveries remained higher. The new solvent system could be reused upto 10 subsequent cycles with the same effectivity. Interestingly, the DE-THF pretreated cellulose showed remarkable enzymatic hydrolysability, despite an increase in its crystallinity to 72.3%. Contrary to conventional pretreatments, we report for the first time that the enzymatic hydrolysis of pretreated cellulose is enhanced by the removal of lignin during DE-THF pretreatment, notwithstanding an increase in its crystallinity. The current study paves way for the development of newer strategies for biomass depolymerization with DES based solvents.

Sign in / Sign up

Export Citation Format

Share Document