Consistent quasistatic and acoustic elasticity determination of poly-L-lactide-based rapid-prototyped tissue engineering scaffolds

2012 ◽  
Vol 101A (1) ◽  
pp. 138-144 ◽  
Author(s):  
Krzysztof W. Luczynski ◽  
Tomasz Brynk ◽  
Barbara Ostrowska ◽  
Wojciech Swieszkowski ◽  
Roland Reihsner ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Tissue Engineering Scaffolds ◽  
Acoustic Elasticity

scholarly journals Determination of the Elasticity Modulus of 3D-Printed Octet-Truss Structures for Use in Porous Prosthesis Implants

Materials ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 2420 ◽  
Author(s):  
Ali Bagheri ◽  
Irene Buj-Corral ◽  
Miquel Ferrer ◽  
Maria Magdalena Pastor ◽  
Francesc Roure
Keyword(s):  
Tissue Engineering ◽  
Modulus Of Elasticity ◽  
Elasticity Modulus ◽  
Solid Material ◽  
Truss Structures ◽  
Compression Tests ◽  
Tissue Engineering Scaffolds ◽  
Octet Truss ◽  
3D Printed

In tissue engineering, scaffolds can be obtained by means of 3D printing. Different structures are used in order to reduce the stiffness of the solid material. The present article analyzes the mechanical behavior of octet-truss microstructures. Three different octet structures with strut radii of 0.4, 0.5, and 0.6 mm were studied. The theoretical relative densities corresponding to these structures were 34.7%, 48.3%, and 61.8%, respectively. Two different values for the ratio of height (H) to width (W) were considered, H/W = 2 and H/W = 4. Several specimens of each structure were printed, which had the shape of a square base prism. Compression tests were performed and the elasticity modulus (E) of the octet-truss lattice-structured material was determined, both, experimentally and by means of Finite Element Methods (FEM). The greater the strut radius, the higher the modulus of elasticity and the compressive strength. Better agreement was found between the experimental and the simulated modulus of elasticity results for H/W = 4 than for H/W = 2. The octet-truss lattice can be considered to be a promising structure for printing in the field of tissue engineering.

Novel tissue engineering scaffolds as wound dressings loaded with Alkannins/Shikonins as active ingredients

2019 ◽  
Author(s):  
AS Arampatzis ◽  
K Theodoridis ◽  
E Aggelidou ◽  
KN Kontogiannopoulos ◽  
I Tsivintzelis ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Wound Dressings ◽  
Active Ingredients ◽  
Tissue Engineering Scaffolds

HYDROXYAPATITE, ALGINATE, AND CHITOSAN FOR BONE SCAFFOLDS: SPECTROSCOPY STUDY

2016 ◽  
Vol 19 (2) ◽  
pp. 93-100
Author(s):  
Lalita El Milla
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Functional Groups ◽  
Bone Growth ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
Tissue Engineering Scaffolds ◽  
Hydroxyapatite Powder ◽  
Materials Used

Scaffolds is three dimensional structure that serves as a framework for bone growth. Natural materials are often used in synthesis of bone tissue engineering scaffolds with respect to compliance with the content of the human body. Among the materials used to make scafffold was hydroxyapatite, alginate and chitosan. Hydroxyapatite powder obtained by mixing phosphoric acid and calcium hydroxide, alginate powders extracted from brown algae and chitosan powder acetylated from crab. The purpose of this study was to examine the functional groups of hydroxyapatite, alginate and chitosan. The method used in this study was laboratory experimental using Fourier Transform Infrared (FTIR) spectroscopy for hydroxyapatite, alginate and chitosan powders. The results indicated the presence of functional groups PO43-, O-H and CO32- in hydroxyapatite. In alginate there were O-H, C=O, COOH and C-O-C functional groups, whereas in chitosan there were O-H, N-H, C=O, C-N, and C-O-C. It was concluded that the third material containing functional groups as found in humans that correspond to the scaffolds material in bone tissue engineering.

scholarly journals Decellularized Porcine Brain Matrix for Cell Culture and Tissue Engineering Scaffolds

2011 ◽  
Vol 17 (21-22) ◽  
pp. 2583-2592 ◽  
Author(s):  
Jessica A. DeQuach ◽  
Shauna H. Yuan ◽  
Lawrence S.B. Goldstein ◽  
Karen L. Christman
Keyword(s):  
Tissue Engineering ◽  
Cell Culture ◽  
Tissue Engineering Scaffolds ◽  
Porcine Brain

scholarly journals GAKTpore: Stereological Characterisation Methods for Porous Foams in Biomedical Applications

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1269
Author(s):  
Gareth Sheppard ◽  
Karl Tassenberg ◽  
Bogdan Nenchev ◽  
Joel Strickland ◽  
Ramy Mesalam ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Biomedical Applications ◽  
Large Scale ◽  
Collagen Scaffold ◽  
Porous Structures ◽  
Tissue Engineering Scaffolds ◽  
Biological Responses ◽  
Sem Micrograph ◽  
Cell Adhesion And Proliferation ◽  
Characterisation Methods

In tissue engineering, scaffolds are a key component that possess a highly elaborate pore structure. Careful characterisation of such porous structures enables the prediction of a variety of large-scale biological responses. In this work, a rapid, efficient, and accurate methodology for 2D bulk porous structure analysis is proposed. The algorithm, “GAKTpore”, creates a morphology map allowing quantification and visualisation of spatial feature variation. The software achieves 99.6% and 99.1% mean accuracy for pore diameter and shape factor identification, respectively. There are two main algorithm novelties within this work: (1) feature-dependant homogeneity map; (2) a new waviness function providing insights into the convexity/concavity of pores, important for understanding the influence on cell adhesion and proliferation. The algorithm is applied to foam structures, providing a full characterisation of a 10 mm diameter SEM micrograph (14,784 × 14,915 px) with 190,249 pores in ~9 min and has elucidated new insights into collagen scaffold formation by relating microstructural formation to the bulk formation environment. This novel porosity characterisation algorithm demonstrates its versatility, where accuracy, repeatability, and time are paramount. Thus, GAKTpore offers enormous potential to optimise and enhance scaffolds within tissue engineering.

Sign in / Sign up

Export Citation Format

Share Document