Impact of volume fraction and fluid layer thickness on heat transfer effectiveness of water‐based nanofluids

Heat Transfer ◽  
2021 ◽  
Author(s):  
Ramesh Krishnan S ◽  
V. N. Narayanan Namboothiri
Keyword(s):  
Heat Transfer ◽  
Layer Thickness ◽  
Volume Fraction ◽  
Fluid Layer ◽  
Water Based

Optimum fluid layer thickness for heat transfer effectiveness using water-based nanofluids-A numerical estimation

2019 ◽  
Vol 48 (8) ◽  
pp. 3945-3967 ◽  
Author(s):  
S. Ramesh Krishnan ◽  
V.N. Narayanan Namboothiri ◽  
Abin Mathew
Keyword(s):  
Heat Transfer ◽  
Layer Thickness ◽  
Fluid Layer ◽  
Numerical Estimation ◽  
Water Based

scholarly journals Conduction and convection heat transfer characteristics of water-based au nanofluids in a square cavity with differentially heated side walls subjected to constant temperatures

2014 ◽  
Vol 18 (suppl.1) ◽  
pp. 189-200 ◽  
Author(s):  
Primoz Ternik ◽  
Rebeka Rudolf
Keyword(s):  
Heat Transfer ◽  
Rayleigh Number ◽  
Base Fluid ◽  
Volume Fraction ◽  
Heat Transfer Characteristics ◽  
Square Cavity ◽  
Onset Of Convection ◽  
Transfer Characteristics ◽  
Wide Range ◽  
Water Based

The present work deals with the natural convection in a square cavity filled with the water-based Au nanofluid. The cavity is heated on the vertical and cooled from the adjacent wall, while the other two horizontal walls are adiabatic. The governing differential equations have been solved by the standard finite volume method and the hydrodynamic and thermal fields were coupled together using the Boussinesq approximation. The main objective of this study is to investigate the influence of the nanoparticles? volume fraction on the heat transfer characteristics of Au nanofluids at the given base fluid?s (i.e. water) Rayleigh number. Accurate results are presented over a wide range of the base fluid Rayleigh number and the volume fraction of Au nanoparticles. It is shown that adding nanoparticles in a base fluid delays the onset of convection. Contrary to what is argued by many authors, we show by numerical simulations that the use of nanofluids can reduce the heat transfer rate instead of increasing it.

Studies on few Water Based Nanofluids Behavior at Heating

2015 ◽  
Vol 1128 ◽  
pp. 384-389
Author(s):  
Madalina Georgiana Moldoveanu ◽  
Alina Adriana Minea
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Unsolved Problem ◽  
Volume Fraction ◽  
Transfer Enhancement ◽  
Two Phase ◽  
Heat Transfer Fluids ◽  
Surface Areas ◽  
Water Based ◽  
Semi Empirical

Application of nanoparticles provides an effective way of improving heat transfer characteristics of fluids. Particles less than 100 nm in diameter exhibit different properties from those of conventional solids. Compared with micron-sized particles, nanophase powders have much larger relative surface areas and a great potential for heat transfer enhancement. Some researchers tried to suspend nanoparticles into fluids to form high effective heat transfer fluids. Some preliminary experimental results showed that increase in thermal conductivity of approximately 60% can be obtained for some nanofluids consisting of water and 5 vol% CuO nanoparticles. So, the thermal conductivity of nanofluid was found to be strongly dependent on the nanoparticle volume fraction. So far it has been an unsolved problem to develop a sophisticated theory to predict thermal conductivity of nanofluids, although there are some semi empirical correlations to calculate the apparent conductivity of two-phase mixture. In this article, several correlations for predicting the nanofluid thermal conductivity will be compared and results will be discussed for three water based nanofluids.

Convective Heat Transfer for Water-Based Alumina Nanofluids in a Single 1.02-mm Tube

2009 ◽  
Vol 131 (11) ◽  
Author(s):  
W. Y. Lai ◽  
S. Vinod ◽  
P. E. Phelan ◽  
Ravi Prasher
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Convective Heat Transfer ◽  
Effective Thermal Conductivity ◽  
Convective Heat ◽  
Volume Fraction ◽  
Pure Water ◽  
Submicron Particles ◽  
Strong Temperature Dependence ◽  
Water Based

Nanofluids are colloidal solutions, which contain a small volume fraction of suspended submicron particles or fibers in heat transfer liquids such as water or glycol mixtures. Compared with the base fluid, numerous experiments have generally indicated an increase in effective thermal conductivity and a strong temperature dependence of the static effective thermal conductivity. However, in practical applications, a heat conduction mechanism may not be sufficient for cooling high heat dissipation devices such as microelectronics or powerful optical equipment. Thus, thermal performance under convective heat transfer conditions becomes of primary interest. We report here the heat transfer coefficient h in both developing and fully developed regions by using water-based alumina nanofluids. Our experimental test section consists of a single 1.02-mm diameter stainless steel tube, which is electrically heated to provide a constant wall heat flux. Both pressure drop and temperature differences are measured, but mostly here we report our h measurements under laminar flow conditions. An extensive characterization of the nanofluid samples, including pH, electrical conductivity, particle sizing, and zeta potential, is also documented. The measured h values for nanofluids are generally higher than those for pure water. In the developing region, this can be at least partially explained by Pr number effects.

scholarly journals Research on heat transfer characteristics of flow in tube of water-based nanofluids

2020 ◽  
pp. 301-301
Author(s):  
Pengfei Chen ◽  
Zhuangzhuang Jia ◽  
Zhumei Luo ◽  
Shan Qing ◽  
Xiaoyan Huang
Keyword(s):  
Heat Transfer ◽  
Entropy Production ◽  
Forced Convection ◽  
Volume Fraction ◽  
Convection Heat Transfer ◽  
Transfer Entropy ◽  
Hybrid Nanofluid ◽  
Convection Heat ◽  
Forced Convection Heat Transfer ◽  
Water Based

In this paper, the characteristics of forced convection heat transfer in water-based nanofluids are studied by means of experimental and theoretical analysis. Nusselt number of nanofluids were calculated by changing the volume fraction and the type of nanoparticles in the tube. The effects of Reynolds number and the volume fraction of nanoparticles on the forced convection heat transfer were studied. An exergy analytical model was established for the laminar heat transfer of nanofluid under the condition of constant heat flow. At the same Reynolds condition, the friction entropy production of the flow and heat transfer process in the tube increases with the addition of nanoparticles, and the heat transfer entropy production decreases at the same time. However, the magnitude of friction entropy production is only 10-6, which is negligible compared with the heat transfer entropy production. Therefore, in general, the loss of nanofluids is lower than that of pure water; for nanofluids, the exergy loss of hybrid nanofluid is lower than that of single nanofluid at the same volume fraction.

Numerical Analysis of Unsteady Conjugate Natural Convection of Hybrid Water-Based Nanofluid in a Semicircular Cavity

2017 ◽  
Vol 9 (4) ◽  
Author(s):  
Ali J. Chamkha ◽  
Igor V. Miroshnichenko ◽  
Mikhail A. Sheremet
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Heat Transfer Enhancement ◽  
Volume Fraction ◽  
Finite Thickness ◽  
Hybrid Nanofluid ◽  
Dimensionless Time ◽  
Transfer Enhancement ◽  
Conjugate Natural Convection ◽  
Water Based

Unsteady conjugate natural convection in a semicircular cavity with a solid shell of finite thickness filled with a hybrid water-based suspension of Al2O3 and Cu nanoparticles (hybrid nanofluid) has been analyzed numerically. The governing equations for this investigation are formulated in terms of the dimensionless stream function, vorticity, and temperature and have been solved by the finite difference method of the second-order accuracy. The effects of the dimensionless time, Rayleigh number, thermal conductivity ratio, and the nanoparticles volume fraction on the flow patterns and heat transfer have been studied. The obtained results have revealed essential heat transfer enhancement at solid–fluid interface with addition of nanoparticles. In addition, a comparison of the heat transfer enhancement level due to the suspension of various nanoparticles materials (Al2O3 and Cu) in water as regular nanofluids (Al2O3/water and Cu/water) and as a hybrid Al2O3–Cu/water nanofluid is reported.

Natural Convection From a Buried Pipe With a Superimposed Fluid Layer

2007 ◽  
Author(s):  
C. C. Ngo ◽  
F. C. Lai
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Rayleigh Number ◽  
Layer Thickness ◽  
Stokes Equations ◽  
Fluid Layer ◽  
Tangential Velocity ◽  
Darcy Number ◽  
Velocity Shear ◽  
Buried Pipe

Heat transfer induced by buoyancy from a pipe buried in a semi-infinite porous medium with a superimposed fluid layer has been numerically examined in this study. Due to the complexity involved, finite difference method along with body-fitted coordinate systems has been employed. The Brinkman-extended Darcy equations are used to model flow in the porous medium while Navier-Stokes equations are used for the fluid layer. The conditions applied at the interface between the fluid and porous layers are the continuity of temperature, heat flux, normal and tangential velocity, shear stress and pressure. A parametric study has been performed to investigate the effects of Rayleigh number, Prandtl number, Darcy number, and fluid layer thickness on the flow patterns and heat transfer rates. The results show that heat transfer increases with the Rayleigh number, but the convective strength decreases with the Darcy number. The heat transfer rate is smaller when the superimposed fluid is air instead of water. For a porous layer with Da ≤ 0.0005 and an overlaying fluid layer thickness of L/ri ≥ 1, convection is initiated in the fluid layer and it may develop into multiple recirculating cells at a moderate Rayleigh number (i.e., Ra ≤ 104), and may further develop into a single cell at a higher Rayleigh number of 105.

Effect of nanofluids on heat transfer and cooling system of the photovoltaic/thermal performance

2019 ◽  
Vol 29 (6) ◽  
pp. 1920-1946 ◽  
Author(s):  
Rehena Nasrin ◽  
Md. Hasanuzzaman ◽  
N.A. Rahim
Keyword(s):  
Heat Transfer ◽  
Numerical Model ◽  
Thermal Performance ◽  
Thermal Efficiency ◽  
Volume Fraction ◽  
Cooling System ◽  
Solid Volume Fraction ◽  
Inlet Temperature ◽  
Content Type ◽  
Water Based

PurposeEffective cooling is one of the challenges for photovoltaic thermal (PVT) systems to maintain the PV operating temperature. One of the best ways to enhance rate of heat transfer of the PVT system is using advanced working fluids such as nanofluids. The purpose of this research is to develop a numerical model for designing different form of thermal collector systems with different materials. It is concluded that PVT system operated by nanofluid is more effective than water-based PVT system.Design/methodology/approachIn this research, a three-dimensional numerical model of PVT with new baffle-based thermal collector system has been developed and solved using finite element method-based COMSOL Multyphysics software. Water-based different nanofluids (Ag, Cu, Al, etc.), various solid volume fractions up to 3 per cent and variation of inlet temperature (20-40°C) have been applied to obtain high thermal efficiency of this system.FindingsThe numerical results show that increasing solid volume fraction increases the thermal performance of PVT system operated by nanofluids, and optimum solid concentration is 2 per cent. The thermal efficiency is enhanced approximately by 7.49, 7.08 and 4.97 per cent for PVT system operated by water/Ag, water/Cu and water/Al nanofluids, respectively, compared to water. The extracted thermal energy from the PVT system decreases by 53.13, 52.69, 42.37 and 38.99 W for water, water/Al, water/Cu and water/Ag nanofluids, respectively, due to each 1°C increase in inlet temperature. The heat transfer rate from heat exchanger to cooling fluid enhances by about 18.43, 27.45 and 31.37 per cent for the PVT system operated by water/Al, water/Cu, water/Ag, respectively, compared to water.Originality/valueThis study is original and is not being considered for publication elsewhere. This is also not currently under review with any other journal.

Sign in / Sign up

Export Citation Format

Share Document