Heat transfer enhancement of finned‐tube heat exchanger using nozzle‐ and diffuser‐shaped fins instead of straight fins

Heat Transfer ◽  
2021 ◽  
Author(s):  
Ehsan Jalil ◽  
Koorosh Goudarzi
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Heat Transfer Enhancement ◽  
Finned Tube ◽  
Transfer Enhancement ◽  
Tube Heat Exchanger ◽  
Finned Tube Heat Exchanger

scholarly journals Investigation of Fin Spacing for Heat Transfer Enhancement in Cross Flow Over Tubes Between Two Parallel Plates

2019 ◽  
Vol 2 (1) ◽  
Author(s):  
Ahmad Nurye Oumer ◽  
Amer Farhan Alias
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Heat Exchanger ◽  
Heat Transfer Enhancement ◽  
Parallel Plates ◽  
Transfer Enhancement ◽  
Tube Heat Exchanger ◽  
Finned Tube Heat Exchanger ◽  
Different Types ◽  
Fin Spacing

This research explains the investigation of fin spacing for heat transfer enhancement in the finned tube heat exchanger. The objective of this paper is to recommend the optimum fin spacing for heat transfer enhancement. Three different types of tube and spacing are identified through the simulation from Ansys software. The data between simulation using Ansys Fluent and published literature were being compared. Graph of total pressure, Nusselt number and total temperature have been plotted to make the comparison. Result obtained showed that were a bigger agreement between the simulation and published literature for both types of the tube which are circular and elliptic. From the analysis, there were considered two types of arrangement for the different types of tube. From that, the aligned arrangement is the best for heat transfer enhancement compared to the staggered. For the effect of spacing, there was three spacing which is 1.7 mm, 1.8 mm, and 2.0 mm spacing with velocity and the total heat flux is set to be constant (v =1.4 m/s; q = 500 W/m2). For the circular tube, it can be seen that the wider of the fin spacing gave the best heat transfer enhancement in the heat exchanger. Different from the circular which is 1.8 mm spacing is the best for heat transfer enhancement. Other types of tube are a flat surface which is comparing with the variations of Nu vs Re with different heat flux. Then, the result showed that as the Re is increased the Nu will also increase. In the other side, it is recommended for future work to do the real model dimension followed to import to the Ansys instead of assuming the model is symmetrical.

Heat transfer enhancement for fin-tube heat exchanger using vortex generators

2002 ◽  
Vol 16 (1) ◽  
pp. 109-115 ◽  
Author(s):  
Seong-Yeon Yoo ◽  
Dong-Seong Park ◽  
Min-Ho Chung ◽  
Sang-Yun Lee
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Heat Transfer Enhancement ◽  
Vortex Generators ◽  
Transfer Enhancement ◽  
Tube Heat Exchanger ◽  
Fin Tube

scholarly journals Statistical analysis of entropy generation in longitudinally finned tube heat exchanger with shell side nanofluid by a single phase approach

2016 ◽  
Vol 37 (2) ◽  
pp. 3-22 ◽  
Author(s):  
Pavan Kumar Konchada ◽  
Vinay Pv ◽  
Varaprasad Bhemuni
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Entropy Generation ◽  
Single Phase ◽  
Pure Water ◽  
Finned Tube ◽  
Shell Side ◽  
Tube Heat Exchanger ◽  
Phase Approach ◽  
Finned Tube Heat Exchanger

AbstractThe presence of nanoparticles in heat exchangers ascertained increment in heat transfer. The present work focuses on heat transfer in a longitudinal finned tube heat exchanger. Experimentation is done on longitudinal finned tube heat exchanger with pure water as working fluid and the outcome is compared numerically using computational fluid dynamics (CFD) package based on finite volume method for different flow rates. Further 0.8% volume fraction of aluminum oxide (Al2O3) nanofluid is considered on shell side. The simulated nanofluid analysis has been carried out using single phase approach in CFD by updating the user-defined functions and expressions with thermophysical properties of the selected nanofluid. These results are thereafter compared against the results obtained for pure water as shell side fluid. Entropy generated due to heat transfer and fluid flow is calculated for the nanofluid. Analysis of entropy generation is carried out using the Taguchi technique. Analysis of variance (ANOVA) results show that the inlet temperature on shell side has more pronounced effect on entropy generation.

Sign in / Sign up

Export Citation Format

Share Document