Thermal Stability of Modified i-Motif Oligonucleotides with Naphthalimide Intercalating Nucleic Acids

2016 ◽  
Vol 99 (1) ◽  
pp. 14-19 ◽  
Author(s):  
Ahmed Ali El-Sayed ◽  
Erik B. Pedersen ◽  
Nahid Y. Khaireldin
Keyword(s):  
Thermal Stability ◽  
Nucleic Acids ◽  
Thermal Stability Of

scholarly journals Acyclic Nucleic Acids with Phosphodiester Linkages—Synthesis, Properties and Potential Applications

2021 ◽  
Vol 11 (24) ◽  
pp. 12125
Author(s):  
Agnieszka Tomaszewska-Antczak ◽  
Piotr Guga
Keyword(s):  
Thermal Stability ◽  
Nucleic Acids ◽  
Synthetic Methods ◽  
Synthesis Properties ◽  
Potential Applications ◽  
Biochemical Research ◽  
Thermal Stability Of

This review summarizes the synthetic efforts on acyclic analogs of nucleic acids and provides information on the most interesting features of selected classes of such compounds. The selection includes the following types of analogs: Flexible (FNA), Unlocked (UNA), Glycol (GNA), Butyl (BuNA), Threoninol (TNA) and Serinol Nucleic Acids (SNA). These classes of analogs are discussed in terms of their synthetic methods, the thermal stability of their homo- and hetero-duplexes and their applicability in biological and biochemical research and nanotechnology.

scholarly journals Double-headed nucleotides as xeno nucleic acids: information storage and polymerase recognition

2020 ◽  
Vol 18 (36) ◽  
pp. 7213-7223
Author(s):  
Kasper M. Beck ◽  
Marie B. Krogh ◽  
Mick Hornum ◽  
Paul T. Ludford ◽  
Yitzhak Tor ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Nucleic Acids ◽  
Dna Polymerase ◽  
Information Storage ◽  
Thermal Stability Of

Double-headed nucleotides increase the thermal stability of duplexes and are recognized by Therminator DNA polymerase.

Investigation of the thermal stability of nucleic acids and their structural components

BIOPHYSICS ◽  
2011 ◽  
Vol 56 (3) ◽  
pp. 393-398
Author(s):  
A. I. Gasan ◽  
V. Ya. Maleev ◽  
A. V. Filipsky
Keyword(s):  
Thermal Stability ◽  
Nucleic Acids ◽  
Structural Components ◽  
Thermal Stability Of

The Ordered Phase Formation in Ti-Al-Ga Alloys

1970 ◽  
Vol 28 ◽  
pp. 440-441
Author(s):  
Shiro Fujishiro ◽  
Harold L. Gegel
Keyword(s):  
Thermal Stability ◽  
High Temperature ◽  
Titanium Alloys ◽  
Growth Kinetics ◽  
Stoichiometric Composition ◽  
Good Potential ◽  
Alpha Titanium ◽  
Cold Rolled ◽  
Kinetics Of ◽  
Thermal Stability Of

Ordered-alpha titanium alloys having a DO19 type structure have good potential for high temperature (600°C) applications, due to the thermal stability of the ordered phase and the inherent resistance to recrystallization of these alloys. Five different Ti-Al-Ga alloys consisting of equal atomic percents of aluminum and gallium solute additions up to the stoichiometric composition, Ti3(Al, Ga), were used to study the growth kinetics of the ordered phase and the nature of its interface.The alloys were homogenized in the beta region in a vacuum of about 5×10-7 torr, furnace cooled; reheated in air to 50°C below the alpha transus for hot working. The alloys were subsequently acid cleaned, annealed in vacuo, and cold rolled to about. 050 inch prior to additional homogenization

Microstructure studies of tungsten silicide schottky contacts on Gaas

1987 ◽  
Vol 45 ◽  
pp. 328-329
Author(s):  
Yih-Cheng Shih ◽  
E. L. Wilkie
Keyword(s):  
Thermal Stability ◽  
Field Effect Transistors ◽  
Schottky Contact ◽  
Schottky Contacts ◽  
Excellent Thermal Stability ◽  
Barrier Heights ◽  
Gaas Substrates ◽  
Film Adhesion ◽  
Threshold Voltages ◽  
Thermal Stability Of

Tungsten silicides (WSix) have been successfully used as the gate materials in self-aligned GaAs metal-semiconductor-field- effect transistors (MESFET). Thermal stability of the WSix/GaAs Schottky contact is of major concern since the n+ implanted source/drain regions must be annealed at high temperatures (∼ 800°C). WSi0.6 was considered the best composition to achieve good device performance due to its low stress and excellent thermal stability of the WSix/GaAs interface. The film adhesion and the uniformity in barrier heights and ideality factors of the WSi0.6 films have been improved by depositing a thin layer of pure W as the first layer on GaAs prior to WSi0.6 deposition. Recently WSi0.1 has been used successfully as the gate material in 1x10 μm GaAs FET's on the GaAs substrates which were sputter-cleaned prior to deposition. These GaAs FET's exhibited uniform threshold voltages across a 51 mm wafer with good film adhesion after annealing at 800°C for 10 min.

Thermal stability of Al-Cu-Fe icosahedral alloys

1991 ◽  
Vol 1 (12) ◽  
pp. 1823-1836 ◽  
Author(s):  
M. Bessière ◽  
A. Quivy ◽  
S. Lefebvre ◽  
J. Devaud-Rzepski ◽  
Y. Calvayrac
Keyword(s):  
Thermal Stability ◽  
Thermal Stability Of

Practical criteria for the thermal stability of a unidimensional superconductor

1994 ◽  
Vol 4 (4) ◽  
pp. 653-657
Author(s):  
B. Bonzi ◽  
M. El Khomssi ◽  
H. Lanchon-Ducauquis
Keyword(s):  
Thermal Stability ◽  
Thermal Stability Of

Time and thermal stability of magnetic properties of amorphous Fe80TM3B17 alloys

1998 ◽  
Vol 08 (PR2) ◽  
pp. Pr2-63-Pr2-66 ◽  
Author(s):  
R. Varga ◽  
P. Vojtaník ◽  
A. Lovas
Keyword(s):  
Thermal Stability ◽  
Magnetic Properties ◽  
Thermal Stability Of
Sign in / Sign up

Export Citation Format

Share Document