scholarly journals Visual mechanisms for voice‐identity recognition flexibly adjust to auditory noise level

2021 ◽  
Author(s):  
Corrina Maguinness ◽  
Katharina von Kriegstein
Keyword(s):  
Noise Level ◽  
Identity Recognition ◽  
Auditory Noise

scholarly journals Visual mechanisms for voice-identity recognition flexibly adjust to auditory noise level

2021 ◽  
Author(s):  
Corrina Maguinness ◽  
Katharina von Kriegstein
Keyword(s):  
Low Noise ◽  
Facial Cues ◽  
High Noise ◽  
Identity Recognition ◽  
Low Snr ◽  
Face Area ◽  
The Face ◽  
Auditory Noise ◽  
The Right ◽  
Adaptive Nature

Recognising the identity of voices is a key ingredient of communication. Visual mechanisms support this ability: recognition is better for voices previously learned with their corresponding face (compared to a control condition). This so-called ‘face-benefit’ is supported by the fusiform face area (FFA), a region sensitive to facial form and identity. Behavioural findings indicate that the face-benefit increases in noisy listening conditions. The neural mechanisms for this increase are unknown. Here, using functional magnetic resonance imaging, we examined responses in face-sensitive regions while participants recognised the identity of auditory-only speakers (previously learned by face) in high (SNR -4 dB) and low (SNR 4 dB) levels of auditory noise. We observed a face-benefit in both noise levels, for most participants (16 of 21). In high-noise, the recognition of face-learned speakers engaged the right posterior superior temporal sulcus motion-sensitive face area (pSTS-mFA), a region implicated in the processing of dynamic facial cues. The face-benefit in high-noise also correlated positively with increased functional connectivity between this region and voice-sensitive regions in the temporal lobe in the group of 16 participants with a behavioural face-benefit. In low-noise, the face-benefit was robustly associated with increased responses in the FFA and to a lesser extent the right pSTS-mFA. The findings highlight the remarkably adaptive nature of the visual network supporting voice-identity recognition in auditory-only listening conditions.

Electron Microscopy in Molecular Biology

1967 ◽  
Vol 25 ◽  
pp. 2-3
Author(s):  
Cecil E. Hall
Keyword(s):  
Electron Microscopy ◽  
Molecular Biology ◽  
Noise Level ◽  
Molecular Structures ◽  
Material Structure ◽  
The Arts ◽  
Shadow Casting ◽  
Electron Image ◽  
High Degree ◽  
Very High

The visualization of organic macromolecules such as proteins, nucleic acids, viruses and virus components has reached its high degree of effectiveness owing to refinements and reliability of instruments and to the invention of methods for enhancing the structure of these materials within the electron image. The latter techniques have been most important because what can be seen depends upon the molecular and atomic character of the object as modified which is rarely evident in the pristine material. Structure may thus be displayed by the arts of positive and negative staining, shadow casting, replication and other techniques. Enhancement of contrast, which delineates bounds of isolated macromolecules has been effected progressively over the years as illustrated in Figs. 1, 2, 3 and 4 by these methods. We now look to the future wondering what other visions are waiting to be seen. The instrument designers will need to exact from the arts of fabrication the performance that theory has prescribed as well as methods for phase and interference contrast with explorations of the potentialities of very high and very low voltages. Chemistry must play an increasingly important part in future progress by providing specific stain molecules of high visibility, substrates of vanishing “noise” level and means for preservation of molecular structures that usually exist in a solvated condition.

Detection of a point defect in a silicon single crystal by high-resolution TEM

1995 ◽  
Vol 53 ◽  
pp. 466-467
Author(s):  
M. Awaji
Keyword(s):  
High Resolution ◽  
Single Crystal ◽  
Point Defect ◽  
Point Defects ◽  
Noise Level ◽  
Dark Field ◽  
Silicon Single Crystal ◽  
High Resolution Image ◽  
Dark Field Imaging ◽  
Field Imaging

It is necessary to improve the resolution, brightness and signal-to-noise ratio(s/n) for the detection and identification of point defects in crystals. In order to observe point defects, multi-beam dark-field imaging is one of the useful methods. Though this method can improve resolution and brightness compared with dark-field imaging by diffuse scattering, the problem of s/n still exists. In order to improve the exposure time due to the low intensity of the dark-field image and the low resolution, we discuss in this paper the bright-field high-resolution image and the corresponding subtracted image with reference to a changing noise level, and examine the possibility for in-situ observation, identification and detection of the movement of a point defect produced in the early stage of damage process by high energy electron bombardment.The high-resolution image contrast of a silicon single crystal in the [10] orientation containing a triple divacancy cluster is calculated using the Cowley-Moodie dynamical theory and for a changing gaussian noise level. This divacancy model was deduced from experimental results obtained by electron spin resonance. The calculation condition was for the lMeV Berkeley ARM operated at 800KeV.

The Influence of Background Auditory Noise on P50 and N100 Suppression Elicited by the Paired-Click Paradigm

2020 ◽  
Vol 34 (3) ◽  
pp. 171-178
Author(s):  
Samantha Major ◽  
Kimberly Carpenter ◽  
Logan Beyer ◽  
Hannah Kwak ◽  
Geraldine Dawson ◽  
...  
Keyword(s):  
Sensory Gating ◽  
Autism Spectrum ◽  
Inhibitory Response ◽  
Future Research ◽  
Typically Developing ◽  
Optimal Outcomes ◽  
Hyperactivity Disorder ◽  
Auditory Sensory Gating ◽  
Auditory Noise ◽  
P50 Suppression

Abstract. Auditory sensory gating is commonly assessed using the Paired-Click Paradigm (PCP), an electroencephalography (EEG) task in which two identical sounds are presented sequentially and the brain’s inhibitory response to the second sound is measured. Many clinical populations demonstrate reduced P50 and/or N100 suppression. Testing sensory gating in children may help to identify individuals at risk for neurodevelopmental disorders earlier, including autism spectrum disorder (ASD) and attention-deficit/hyperactivity disorder (ADHD), which could lead to more optimal outcomes. Minimal research has been done with children because of the difficulty of performing lengthy EEG experiments with young children, requiring them to sit still for long periods of time. We designed a modified, potentially child-friendly version of the PCP and evaluated it in typically developing adults. The PCP was administered twice, once in a traditional silent room (silent movie condition) and once with an audible movie playing (audible movie condition) to minimize boredom and enhance behavioral compliance. We tested whether P50 and N100 suppression were influenced by the presence of the auditory background noise from the movie. N100 suppression was observed in both hemispheres in the silent movie condition and in the left hemisphere only during the audible movie condition, though suppression was attenuated in the audible movie condition. P50 suppression was not observed in either condition. N100 sensory gating was successfully elicited with an audible movie playing during the PCP, supporting the use of the modified task for future research in both children and adults.

Evaluation of the accuracy of reconstruction of the electrophysical and geometric parameters of multilayer dielectric coatings by the multi-frequency radio wave method of a slow surface electromagnetic waves

2020 ◽  
pp. 51-58
Author(s):  
Aleksandr I. Kazmin ◽  
Pavel A. Fedjunin
Keyword(s):  
Radio Wave ◽  
Noise Level ◽  
Electromagnetic Waves ◽  
Dielectric Materials ◽  
Geometric Parameters ◽  
Experimental Investigations ◽  
Wave Method ◽  
Dielectric Coatings ◽  
Surface Electromagnetic Waves ◽  
Multilayer Dielectric

One of the most important diagnostic problems multilayer dielectric materials and coatings is the development of methods for quantitative interpretation of the checkout results their electrophysical and geometric parameters. The results of a study of the potential informativeness of the multi-frequency radio wave method of surface electromagnetic waves during reconstruction of the electrophysical and geometric parameters of multilayer dielectric coatings are presented. The simulation model is presented that makes it possible to evaluate of the accuracy of reconstruction of the electrophysical and geometric parameters of multilayer dielectric coatings. The model takes into account the values of the electrophysical and geometric parameters of the coating, the noise level in the measurement data and the measurement bandwidth. The results of simulation and experimental investigations of reconstruction of the structure of relative permittivitties and thicknesses of single-layer and double-layer dielectric coatings with different thicknesses, with different values of the standard deviation (RMS) of the noise level in the measured attenuation coefficients of the surface slow electromagnetic wave are presented. Coatings based on the following materials were investigated: polymethyl methacrylate, F-4D PTFE, RO3010. The accuracy of reconstruction of the electrophysical parameters of the layers decreases with an increase in the number of evaluated parameters and an increase in the noise level. The accuracy of the estimates of the electrophysical parameters of the layers also decreases with a decrease in their relative permittivity and thickness. The results of experimental studies confirm the adequacy of the developed simulation model. The presented model allows for a specific measuring complex that implements the multi-frequency radio wave method of surface electromagnetic waves, to quantify the potential possibilities for the accuracy of reconstruction of the electrophysical and geometric parameters of multilayer dielectric materials and coatings. Experimental investigations and simulation results of a multilayer dielectric coating demonstrated the theoretical capabilities gained relative error permittivity and thickness of the individual layers with relative error not greater than 10 %, with a measurement bandwidth of 1 GHz and RMS of noise level 0,003–0,004.

AN IMPROVED ARMORED VEHICLE KRAZ “FIONA” NOISE SILENCER

2019 ◽  
pp. 21-26
Author(s):  
Volodymyr Fedorov ◽  
Vasyl’ Yanovsky ◽  
Dmytro Kovalshuk
Keyword(s):  
Noise Reduction ◽  
Speed Of Sound ◽  
Acoustic Waves ◽  
Noise Level ◽  
Combustion Engine ◽  
Environmental Aspect ◽  
Exhaust Gases ◽  
Ecological Requirements ◽  
On The Road ◽  
Armored Vehicle

Ecological requirements for cars grow from year to year, both in the world as a whole, and in Ukraine in particular. This is especially true of noise pollution. Additionally, noise reduction becomes relevant, taking into account the conduct of military operations during the last 5 years on the territory of Ukraine. The war has caused a special need for military vehicles for which masking properties are vital. Noise is a serious disincentive factor. Therefore, its reduction for a military vehicle, apart from the environmental aspect, is of a purely military nature, that is, it is extremely important. The car has many sources of noise there are many ways to deal with them. One of the most powerful source of noise is the sleeping bag. This kind of noise is reduced by means of silencers of noise. The vast majority of silencer data in the basis of its design has a reactive (or resonant) muffler. To calculate the jet silencer you must know the speed of sound in the sleeping bags. In order to increase the acoustic efficiency of reactive and resonant mufflers of exhaust gases noise of the ICE of cars, an experimental method was proposed for determining the speed of sound in the sleighs. Implementation of the method is carried out by measuring the attenuation of acoustic waves. The noise level of the bedrooms is measured without silencer and silencer. Based on the data obtained, the noise reduction performance of the residual is established. From the well-known formula, based on the calculation of the efficiency of the silencing of a jet muffler, a formula is obtained for calculating the speed of sound in the sleeping quays. In this formula, all parameters are known: the level of silencer efficiency, the noise level of the sleeping, the ratio of areas of cross sections of the muffler and the inlet pipe and the length of the muffler. The sound speed thus established can continue to be used not only for engines of the type for which measurements and calculations were made, but also with a certain approximation for some other types of engines. This method provides high accuracy for determining the required parameter. In the given work on the example of the armored car KrAZ “Fiona” the calculation of efficiency increase of the reactive silencer is made due to the above-mentioned method. Also, the projected decrease in the external noise level of the KrAZ Armored Vehicle “Fiona” is considered by determining the speed of sound in the recesses on the trunk cycle on the road with acceleration up to speed of 50 km/h (75 km/h) and the movement with this speed, as well as when driving at a speed of 45 km/h. Keywords: transport, armored car, internal combustion engine, exhaust, exhaust gases, noise, source, acoustic efficiency, acoustic efficiency, speed of sound, jet muffler.

Detection of Narrow-Band Signals with Noise Level Assessment

2008 ◽  
Vol 67 (1) ◽  
pp. 33-39
Author(s):  
S. V. Bukharin ◽  
V. P. Litvinenko ◽  
A. N. Glushkov
Keyword(s):  
Noise Level ◽  
Narrow Band

An Examination of the Effects of Noise Level on Methods to Determine Curvature in Range Images

2019 ◽  
Vol 2019 (10) ◽  
pp. 325-1-325-7
Author(s):  
Jacob D Hauenstein ◽  
Timothy S Newman
Keyword(s):  
Noise Level ◽  
Range Images

Speaker Identity Recognition by Acoustic and Visual Data Fusion through Personal Privacy for Smart Care and Service Applications

2020 ◽  
Vol 64 (4) ◽  
pp. 40404-1-40404-16
Author(s):  
I.-J. Ding ◽  
C.-M. Ruan
Keyword(s):  
Face Detection ◽  
Speaker Recognition ◽  
Visual Information ◽  
Classification Tree ◽  
Gaussian Mixture ◽  
Recognition Method ◽  
Indoor Space ◽  
Identity Recognition ◽  
Visual Identity ◽  
Speaker Classification

Abstract With rapid developments in techniques related to the internet of things, smart service applications such as voice-command-based speech recognition and smart care applications such as context-aware-based emotion recognition will gain much attention and potentially be a requirement in smart home or office environments. In such intelligence applications, identity recognition of the specific member in indoor spaces will be a crucial issue. In this study, a combined audio-visual identity recognition approach was developed. In this approach, visual information obtained from face detection was incorporated into acoustic Gaussian likelihood calculations for constructing speaker classification trees to significantly enhance the Gaussian mixture model (GMM)-based speaker recognition method. This study considered the privacy of the monitored person and reduced the degree of surveillance. Moreover, the popular Kinect sensor device containing a microphone array was adopted to obtain acoustic voice data from the person. The proposed audio-visual identity recognition approach deploys only two cameras in a specific indoor space for conveniently performing face detection and quickly determining the total number of people in the specific space. Such information pertaining to the number of people in the indoor space obtained using face detection was utilized to effectively regulate the accurate GMM speaker classification tree design. Two face-detection-regulated speaker classification tree schemes are presented for the GMM speaker recognition method in this study—the binary speaker classification tree (GMM-BT) and the non-binary speaker classification tree (GMM-NBT). The proposed GMM-BT and GMM-NBT methods achieve excellent identity recognition rates of 84.28% and 83%, respectively; both values are higher than the rate of the conventional GMM approach (80.5%). Moreover, as the extremely complex calculations of face recognition in general audio-visual speaker recognition tasks are not required, the proposed approach is rapid and efficient with only a slight increment of 0.051 s in the average recognition time.

The Status of Noise Pollution in the Major Traffic Intersections of Khulna Metropolitan City in Bangladesh and its Possible Effect on Noise-Exposed People

2020 ◽  
Vol 1 (5) ◽  
Author(s):  
Aliza Sultana ◽  
Ashok Kumar Paul ◽  
Meher Un Nessa
Keyword(s):  
Noise Level ◽  
Noise Pollution ◽  
Pressure Level ◽  
Pollution Level ◽  
Metropolitan City ◽  
Mixed Area ◽  
Commercial Area ◽  
Significant Difference ◽  
Traffic Intersections ◽  
The Status

This study was conducted in the Khulna metropolitan city to determine the status of noise pollution at major traffic intersections and assess the possible effect of noise on regular noise afflicted people. For this research, five busiest roadways and traffic intersections; two mixed zone and three commercial zones were selected purposively and 'ST-8850 Sound Level Meter' was used to record the noise pressure level. Average noise pressure level and some noise parameters (Leq, L10, L50, L90, and Lnp) were measured at different shifts in each location both on working days and holidays. The result evidently specified that noise level in all major traffic circles of Khulna metropolitan city was much higher than the recommended threshold of acceptable noise level set by the Department of Environment (DOE) of Bangladesh. It was observed that the mixed area (Sonadanga, Gollamari) tends to have a higher average noise level than those of the commercial area (Shibbari, Notunrasta, Dakbangla). The noise pollution level (Lnp) in mixed areas varied from 92.77 dB (A) to 104.74 dB(A) on working days and 86.9 dB(A) to 105.5 dB(A) on holidays. On working days, the highest Leq was observed 92.65 ± 4.15 dB(A) in Sonadanga (mixed area), whereas the lowest was 85.13 ± 2.83 dB(A) in Dakbangla (commercial area). However, on holidays the highest level of Leq was found 90.41 ± 2.25 dB(A) in Sonadanga, while the lowest levels were 80.43 ± 3.20 dB(A) in Dakbangla. One-way ANOVA with LSD post-hoc test results illustrated that on working days there was a significant difference between the noise pollution levels (NPL) in different shifts of day time (F = 8.412, p < .05). The respondents of the study area addressed that they were the most affected by annoyance (70%), headache (62%), and hearing loss (46%) due to regular exposure to the traffic noise. Therefore, it is recommended to enhance awareness regarding the cause and effect of noise pollution among the noise producers and oppressed people. Subsequently, administrative measures have to take to attenuate noise pollution and indemnify the quality health of the citizens.

Sign in / Sign up

Export Citation Format

Share Document