Highly efficient reduction of CO 2 by magnesium and calcium hydride producing H 2 ‐mixed CH 4 : Effect of the particle size and the molar ratio of reactant

2021 ◽  
Author(s):  
Jin‐Peng Wang ◽  
Guo‐Cui Mao ◽  
Juan Zhao ◽  
Yin‐Fan Wei ◽  
Wen‐Long Liu ◽  
...  
Keyword(s):  
Particle Size ◽  
Molar Ratio ◽  
Calcium Hydride ◽  
Highly Efficient ◽  
Efficient Reduction

scholarly journals Feasibility of fly ash as fluxing agent in mid- and low-grade phosphate rock carbothermal reduction and its reaction kinetics

2021 ◽  
Vol 10 (1) ◽  
pp. 157-168
Author(s):  
Biwei Luo ◽  
Pengfei Li ◽  
Yan Li ◽  
Jun Ji ◽  
Dongsheng He ◽  
...  
Keyword(s):  
Particle Size ◽  
Fly Ash ◽  
Reaction Time ◽  
Carbothermal Reduction ◽  
Industrial Waste ◽  
Phosphate Rock ◽  
Molar Ratio ◽  
Low Grade ◽  
Carbon Excess ◽  
Fluxing Agent

Abstract The feasibility of industrial waste fly ash as an alternative fluxing agent for silica in carbothermal reduction of medium-low-grade phosphate ore was studied in this paper. With a series of single-factor experiments, the reduction rate of phosphate rock under different reaction temperature, reaction time, particle size, carbon excess coefficient, and silicon–calcium molar ratio was investigated with silica and fly ash as fluxing agents. Higher reduction rates were obtained with fly ash fluxing instead of silica. The optimal conditions were derived as: reaction temperature 1,300°C, reaction time 75 min, particle size 48–75 µm, carbon excess coefficient 1.2, and silicon–calcium molar ratio 1.2. The optimized process condition was verified with other two different phosphate rocks and it was proved universally. The apparent kinetics analyses demonstrated that the activation energy of fly ash fluxing is reduced by 31.57 kJ/mol as compared with that of silica. The mechanism of better fluxing effect by fly ash may be ascribed to the fact that the products formed within fly ash increase the amount of liquid phase in the reaction system and promote reduction reaction. Preliminary feasibility about the recycling of industrial waste fly ash in thermal phosphoric acid industry was elucidated in the paper.

Effect of the Synthesis Method on the Properties of Ultrafine YAG Powder

2018 ◽  
Vol 281 ◽  
pp. 40-45
Author(s):  
Jie Guang Song ◽  
Lin Chen ◽  
Cai Liang Pang ◽  
Jia Zhang ◽  
Xian Zhong Wang ◽  
...  
Keyword(s):  
Particle Size ◽  
Calcination Temperature ◽  
Hydrothermal Reaction ◽  
Synthesis Method ◽  
Particle Morphology ◽  
Precipitation Method ◽  
Molar Ratio ◽  
Synthesis Process ◽  
Powder Materials ◽  
Co Precipitation

YAG materials has a number of unique properties, the application is very extensive. In this paper, the superfine YAG powder materials were prepared by co-precipitation method and hydrothermal precipitation method. The influence of synthesis process on the morphology of the powder was investigated. The results showed that the precursor powder prepared via the co-precipitation method is mainly from amorphous to crystalline transition with the increasing calcination temperature, the precursor agglomeration is more serious, In the process of increasing the calcination temperature, the dispersibility of the roasted powder is greatly improved, which is favorable for the growth of the crystal grains, so that the particle size of the powder is gradually increased, the YAG precursor prepared by the co-precipitation method is transformed into YAG crystals, the phase transition occurs mainly between 900 and 1100°C. When the molar ratio of salt to alkali is Y3+: OH-=1: 8 via the hydrothermal reaction, the YAG particles with homogeneous morphology can be obtained. When the molar ratio of salt and alkali is increased continuously, the morphology of YAG particles is not obviously changed. The co-precipitation method is easy to control the particle size, the hydrothermal method is easy to control the particle morphology.

Highly efficient reduction of bromate to bromide over mono and bimetallic ZSM5 catalysts

2015 ◽  
Vol 17 (8) ◽  
pp. 4247-4254 ◽  
Author(s):  
C. M. A. S. Freitas ◽  
O. S. G. P. Soares ◽  
J. J. M. Órfão ◽  
A. M. Fonseca ◽  
M. F. R. Pereira ◽  
...  
Keyword(s):  
Highly Efficient ◽  
Efficient Reduction

Reduction of bromate to bromide over mono and bimetallic ZSM5 catalysts was efficiently achieved and PdCu–ZSM5 is the best catalyst.

Fe3O4 Magnetic Preparation by Bauxite Ore Washing Fine Mud

2014 ◽  
Vol 1010-1012 ◽  
pp. 961-965
Author(s):  
Jian Qiang Xiao ◽  
Guo Wei He ◽  
Yan Jin Hu
Keyword(s):  
Particle Size ◽  
Aging Time ◽  
Average Particle Size ◽  
Xrd Analysis ◽  
Test Methods ◽  
Raw Material ◽  
Molar Ratio ◽  
Average Particle ◽  
Experimental Conditions ◽  
Particle Size Analyzer

Bauxite waste sludge as a raw material, the use of reverse chemical coprecipitation synthesize Fe3O4. Researching temperature, precipitation concentration, aging time and Fe2+/Fe3+ molar ratio effect on the particle size, morphology. Optimal experimental conditions: temperature 70 °C, the precipitant NaOH mass ratio of 10%, aging time 3h, Fe2+/Fe3+ molar ratio of 2:3. Test methods using a laser particle size analyzer, XRD analysis of the products were characterized, the product is Fe3O4, the average particle size of 0.11mm.

Study on the Control of Super-Fine Aluminum Hydroxide Particle Size from Sodium Aluminate Solutions

2013 ◽  
Vol 750-752 ◽  
pp. 1754-1757
Author(s):  
Cheng Qian ◽  
Xing Yong Liu ◽  
Shi Xiong Hao ◽  
Ting Ting Tang ◽  
Ya Jing Lan ◽  
...  
Keyword(s):  
Particle Size ◽  
Aluminum Hydroxide ◽  
Sodium Aluminate ◽  
Molar Ratio ◽  
Optimum Conditions ◽  
Precipitation Temperature ◽  
Temperature And Precipitation ◽  
Seed Precipitation ◽  
Crystal Seed

The super-fine aluminum hydroxide was prepared by crystal seed precipitation from sodium aluminate solutions in this study. The influence of NaOH concentration, [NaO/[Al (OH)3] molar ratio, precipitation temperature, and precipitation time on the particle size of super-fine aluminum hydroxide was investigated. The results show that the optimum conditions were: NaOH concentration be 180 g/L, [NaO/[Al (OH)3] molar ratio be 1.15, precipitation temperature be 40°C, and precipitation time be 26 h.

scholarly journals Initial Investigation into the Leaching of Manganese from Nodules at Room Temperature with the Use of Sulfuric Acid and the Addition of Foundry Slag—Part I

Minerals ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 565 ◽  
Author(s):  
Norman Toro ◽  
Nelson Herrera ◽  
Jonathan Castillo ◽  
Cynthia Torres ◽  
Rossana Sepúlveda
Keyword(s):  
Particle Size ◽  
Sulfuric Acid ◽  
Acid Concentration ◽  
Room Temperature ◽  
Sulfuric Acid Concentration ◽  
Extraction Rate ◽  
Molar Ratio ◽  
Independent Variables ◽  
Initial Investigation ◽  
Optimization Methodology

In this study, the surface optimization methodology was used to assess the effect of three independent variables—time, particle size and sulfuric acid concentration—on Mn extraction from marine nodules during leaching with H2SO4 in the presence of foundry slag. The effect of the MnO2/Fe ratio and particle size (MnO2) was also investigated. The maximum Mn extraction rate was obtained when a MnO2 to Fe molar ratio of 0.5, 1 M of H2SO4, −320 + 400 Tyler mesh (−47 + 38 μm) nodule particle size and a leaching time of 30 min were used.

Sign in / Sign up

Export Citation Format

Share Document