Comparison of spectral and finite element methods applied to the study of the core-annular flow in an undulating tube

2002 ◽  
Vol 39 (1) ◽  
pp. 41-73 ◽  
Author(s):  
Charalampos Kouris ◽  
Yannis Dimakopoulos ◽  
Georgios Georgiou ◽  
John Tsamopoulos
Keyword(s):  
Finite Element ◽  
Finite Element Methods ◽  
Annular Flow ◽  
The Core

Equilibrium Profile of Modern Belted Radial Ply Tires: Its Determination and Performance Benefits

2013 ◽  
Vol 41 (2) ◽  
pp. 127-151
Author(s):  
Rudolf F. Bauer
Keyword(s):  
Finite Element ◽  
Aspect Ratio ◽  
Finite Element Methods ◽  
Mathematical Analysis ◽  
Internal Stresses ◽  
Stress Concentrations ◽  
Equilibrium Profiles ◽  
Equilibrium Profile ◽  
And Performance ◽  
Beneficial Property

ABSTRACT The benefits of a tire's equilibrium profile have been suggested by several authors in the published literature, and mathematical procedures were developed that represented well the behavior of bias ply tires. However, for modern belted radial ply tires, and particularly those with a lower aspect ratio, the tire constructions are much more complicated and pose new problems for a mathematical analysis. Solutions to these problems are presented in this paper, and for a modern radial touring tire the equilibrium profile was calculated together with the mold profile to produce such tires. Some construction modifications were then applied to these tires to render their profiles “nonequilibrium.” Finite element methods were used to analyze for stress concentrations and deformations within all tires that did or did not conform to equilibrium profiles. Finally, tires were built and tested to verify the predictions of these analyses. From the analysis of internal stresses and deformations on inflation and loading and from the actual tire tests, the superior durability of tires with an equilibrium profile was established, and hence it is concluded that an equilibrium profile is a beneficial property of modern belted radial ply tires.

Finite element methods for internal flow calculations

1983 ◽  
Author(s):  
W. HABASHI ◽  
M. HAFEZ ◽  
P. KOTIUGA
Keyword(s):  
Finite Element ◽  
Finite Element Methods ◽  
Internal Flow

Design and Research of Double-Drum Winch with Anti-Pressure Wheel

2012 ◽  
Vol 479-481 ◽  
pp. 1709-1713
Author(s):  
Kai An Yu ◽  
Tao Yang ◽  
Chang Zhi Gong
Keyword(s):  
Finite Element ◽  
Bearing Capacity ◽  
Finite Element Methods ◽  
Design Method ◽  
New Method

In view of the problems of large stress and severe bearing heating in double-drum winch at present, this paper adopted a new method to enhance bearing capacity for double-drum winch by adding anti-pressure wheels between two drums. Finite element methods were used to analyze the strength of 4000kN-traction double-drum winches with anti-pressure wheels and without anti-pressure wheels respectively. The results of the analysis revealed that the stress of the cylinder bearing decreased from 264MPa to 167MPa. The new method by adding anti-pressure wheels had remarkably improved the endurance of the bearing. Therefore, the design method can be widely used in large-traction double-drum winch.

Sign in / Sign up

Export Citation Format

Share Document