Flame-retarded polyethylene terephthalate with carbon microspheres/magnesium hydroxide compound flame retardant

2018 ◽  
Vol 42 (7) ◽  
pp. 794-804 ◽  
Author(s):  
Yaru Yang ◽  
Mei Niu ◽  
Jinming Dai ◽  
Jie Bai ◽  
Baoxia Xue ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Polyethylene Terephthalate ◽  
Magnesium Hydroxide ◽  
Carbon Microspheres ◽  
Flame Retarded

Infrared Analysis on Pyrolysis Products of Flame Retardant Rigid Polyurethane Foam

2014 ◽  
Vol 1033-1034 ◽  
pp. 900-906
Author(s):  
Ze Jiang Zhang ◽  
Li Jun Li ◽  
Feng Li ◽  
Jin He ◽  
Zi Qiong Gan
Keyword(s):  
Flame Retardant ◽  
Polyurethane Foam ◽  
Magnesium Hydroxide ◽  
Hydrogen Cyanide ◽  
Flame Retardants ◽  
Fire Retardant ◽  
Infrared Analysis ◽  
Antimony Trioxide ◽  
Stretching Vibration ◽  
Flame Retarded

Infrared spectra of the pyrolysis gases of polyurethane foam flame retarded by MPOP, MP, MC, magnesium hydroxide, or antimony trioxide flame retardants was analyzed online by FTIR method. At 600°C, the polyurethane foam flame retarded by MPOP, MP, MC, magnesium hydroxide or antimony trioxide flame retardants released more hydrogen cyanide than the pure polyurethane foam, proved that the MPOP, MP, MC and magnesium hydroxide flame retardants could change the law that the polyurethane released hydrogen cyanide. At 600 °C, the peak of C=O stretching vibration at 1730cm-1did not appear for the flame-retardant polyurethane, indicating that the flame retardants can make the polyurethane rapidly carbonize and the fewer C=O intermediate was produced. The absorbent peaks of the fire-retardant samples at 1604cm-1, 1538 cm-1, 1250 to 1230 cm-1and 1450cm-1implied that the flame retardants could delay the oxidative decomposition of the polyurethane component at 600 °C, so that more components may be carbonized. When increasing the pyrolysis temperature, the perlite would make polyurethane foam release fewer hydrogen cyanide.

Effect of Fumed Silica and Zinc Borate on the Thermal Property of ABS/Magnesium Hydroxide Flame Retardant Composites

2014 ◽  
Vol 997 ◽  
pp. 424-427 ◽  
Author(s):  
Xiao Ping Cai ◽  
Zhang Ting Li ◽  
Pei Bang Dai ◽  
Yue Qun Lu ◽  
Li Li Fan
Keyword(s):  
Thermal Property ◽  
Heat Release ◽  
Flame Retardant ◽  
Magnesium Hydroxide ◽  
Fumed Silica ◽  
Zinc Borate ◽  
Endothermic Effect ◽  
Release Reaction ◽  
Flame Retarded ◽  
Made In

Magnesium hydroxide (MH) has been used with polymers to make composites having flame retardancy as an environmental-friendly flame retardant. An attempt has been made in this direction, in order to enhance its flame retardant effectiveness. The synergistic effect of fumed silica (SiO2) and zinc borate (ZB) with MH in ABS based flame retardant composites was investigated with DSC. The endothermic effect of MH had little influence on the heat release reaction of ABS. The addition of ZB could not improve the thermal property of flame retarded ABS with MH. SiO2 or SiO2/ZB could significantly enhance the thermal property of the flame retarded ABS with MH based on the cooling effect of MH and the restraining effect of SiO2 or SiO2/ZB on the heat release reaction of SAN copolymer in ABS.

Flammability, morphological and mechanical properties of sugar palm fiber/polyester yarn-reinforced epoxy hybrid biocomposites with magnesium hydroxide flame retardant filler

2021 ◽  
pp. 004051752110086
Author(s):  
MJ Suriani ◽  
SM Sapuan ◽  
CM Ruzaidi ◽  
DS Nair ◽  
RA Ilyas
Keyword(s):  
Tensile Strength ◽  
Surface Morphology ◽  
Flame Retardant ◽  
Tensile Properties ◽  
Magnesium Hydroxide ◽  
Building Materials ◽  
Epoxy Composite ◽  
Sem Analysis ◽  
Palm Fiber ◽  
Sugar Palm Fiber

This paper aims to study the surface morphology, flammability and tensile properties of sugar palm fiber (SPF) hybrid with polyester (PET) yarn-reinforced epoxy composite with the addition of magnesium hydroxide (Mg(OH)2) as a flame retardant. The composites were prepared by hybridized epoxy and Mg(OH)2/PET with different amounts of SPF contents (0%, 20%, 35% and 50%) using the cold press method. Then these composites were tested by horizontal burning analysis, tensile strength testing and scanning electron microscopy (SEM) analysis. The specimen with 35% SPF (Epoxy/PET/SPF-35) with the incorporation of Mg(OH)2 as a flame retardant showed the lowest burning rate of 13.25 mm/min. The flame took a longer time to propagate along with the Epoxy/PET/SPF-35 specimen and at the same time producing char. Epoxy/PET/SPF-35 also had the highest tensile strength of 9.69 MPa. Tensile properties of the SPF hybrid with PET yarn (SPF/PET)-reinforced epoxy composite was decreased at 50% SPF content due to the lack of interfacial bonding between the fibers and matrix. Surface morphology analysis through SEM showed uniform distribution of the SPF and matrix with less adhesion, which increased the flammability and reduced the tensile properties of the hybrid polymeric composites. These composites have potential to be utilized in various applications, such as automotive components, building materials and in the aerospace industry.

Flame Retardant Polyamide 6 Composites Using NMH or NMH/MCA/APP

2011 ◽  
Vol 189-193 ◽  
pp. 1208-1211 ◽  
Author(s):  
Yan Shen ◽  
Shao Guo Wen ◽  
Ji Hu Wang ◽  
Hong Bo Liu ◽  
Hai Liang Qi ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Magnesium Hydroxide ◽  
Flame Retardants ◽  
Polyamide 6 ◽  
X Ray Diffraction ◽  
Upward Trend ◽  
Orthorhombic Crystal ◽  
Orthorhombic Crystal Structure ◽  
Orthogonal Experiments ◽  
Nitrogen Phosphorus

In this paper, flame retardant Polyamide 6 (PA6) composites were prepared by nano-magnesium hydroxide (NMH) or its composites with melamine cyanurate(MCA) and ammonium polyphosphate(APP). Scanning electron microscopy (SEM) and X-ray diffraction (XRD) were used to analyze the structure of nano-magnesium hydroxide. The properties including tensile properties, molten index (MFI), rockwell hardness and density of flame retardant PA6 were analyzed. Orthogonal experiments were used to study flame retardancy of PA6 with NMH, MCA and APP. The results showed NMH had hexagonal orthorhombic crystal structure with size of 300×200×100nm. Density of polyamide 6 showed an upward trend when the content of NMH was increasing, the mechanical properties and hardness changed little while processing performance serious declined. The flame retardance of nitrogen-phosphorus -inorganic flame retardants was not desirable.

Preparing and Applying of Flame Retardant Microcapsules Containing Magnesium Hydroxide

2013 ◽  
Vol 734-737 ◽  
pp. 2191-2194
Author(s):  
Li Li Wu ◽  
Yuan Lian ◽  
Dan Liu ◽  
Hua Zheng ◽  
Dian Wu Huang
Keyword(s):  
Thermal Stability ◽  
Flame Retardant ◽  
Magnesium Hydroxide ◽  
Low Density Polyethylene ◽  
Core Shell ◽  
Low Density ◽  
Melamine Resin ◽  
Shell Material ◽  
Elongation At Break ◽  
Good Thermal Stability

In this study, flame retardant microcapsules were synthesized using magnesium hydroxide as core materials, melamine resin as the shell material. The structure, diameters and thermal properties of prepared microcapsules were investigated by using FTIR, ELS, DSC and TGA. The effects of core/shell ratio on the properties of microcapsules were studied.Flame retardant materials of low-density polyethylene/magnesium hydroxide microcapsules were prepared.The tensile strength and elongation at break tests were performed to determine its mechanical property.Inflammability of the materials was also studied.The results showed the prepared magnesium hydroxide microcapsule shows good thermal stability and it has free compatibility with the polymer.The composites of HDPE/MH microcapsules have good performance．

Sign in / Sign up

Export Citation Format

Share Document