Analysis of a combined power and cooling cycle for low-grade heat sources

2010 ◽  
Vol 35 (13) ◽  
pp. 1145-1157 ◽  
Author(s):  
Gokmen Demirkaya ◽  
Ricardo Vasquez Padilla ◽  
D. Yogi Goswami ◽  
Elias Stefanakos ◽  
Muhammad M. Rahman
Keyword(s):  
Low Grade ◽  
Heat Sources ◽  
Cooling Cycle ◽  
Low Grade Heat

Multi-Objective Optimization of a Combined Power and Cooling Cycle for Low-Grade and Midgrade Heat Sources

2012 ◽  
Vol 134 (3) ◽  
Author(s):  
Gokmen Demirkaya ◽  
Saeb Besarati ◽  
Ricardo Vasquez Padilla ◽  
Antonio Ramos Archibold ◽  
D. Yogi Goswami ◽  
...  
Keyword(s):  
Thermodynamic Cycle ◽  
Solution Concentration ◽  
Working Fluid ◽  
Low Grade ◽  
Basic Solution ◽  
Heat Sources ◽  
Fluid Mixture ◽  
Cooling Cycle ◽  
Multi Objective ◽  
First Case

Optimization of thermodynamic cycles is important for the efficient utilization of energy sources; indeed, it is more crucial for the cycles utilizing low-grade heat sources where the cycle efficiencies are smaller compared to high temperature power cycles. This paper presents the optimization of a combined power/cooling cycle, also known as the Goswami cycle, which combines the Rankine and absorption refrigeration cycles. The cycle uses a special binary fluid mixture as the working fluid and produces a power and refrigeration. In this regard, multi-objective genetic algorithms (GAs) are used for Pareto approach optimization of the thermodynamic cycle. The optimization study includes two cases. In the first case, the performance of the cycle is evaluated as it is used as a bottoming cycle and in the second case, as it is used as a top cycle utilizing solar energy or geothermal sources. The important thermodynamic objectives that have been considered in this work are, namely, work output, cooling capacity, effective first law, and exergy efficiencies. Optimization is carried out by varying the selected design variables, such as boiler temperature and pressure, rectifier temperature, and basic solution concentration. The boiler temperature is varied between 70–150 °C and 150–250 °C for the first and the second cases, respectively.

Meanline Analysis and CFD Study of a Radial Inflow Turbine With Vaneless Distributor for Low Temperature Organic Rankine Cycle

2020 ◽  
Author(s):  
M. Deligant ◽  
S. Braccio ◽  
T. Capurso ◽  
F. Fornarelli ◽  
M. Torresi ◽  
...  
Keyword(s):  
Energy Demand ◽  
Waste Heat ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Operating Conditions ◽  
Low Grade ◽  
Heat Sources ◽  
Turbine Wheel ◽  
Good Efficiency ◽  
Low Grade Heat

Abstract The Organic Rankine Cycle (ORC) allows the conversion of low-grade heat sources into electricity. Although this technology is not new, the increase in energy demand and the need to reduce CO2 emissions create new opportunities to harvest low grade heat sources such as waste heat. Radial turbines have a simple construction, they are robust and they are not very sensitive to geometry inaccuracies. Most of the radial inflow turbines used for ORC application feature a vaned nozzle ensuring the appropriate distribution angle at the rotor inlet. In this work, no nozzle is considered but only the vaneless gap (distributor). This configuration, without any vaned nozzle, is supposed to be more flexible under varying operating conditions with respect to fixed vanes and to maintain a good efficiency at off-design. This paper presents a performance analysis carried out by means of two approaches: a combination of meanline loss models enhanced with real gas fluid properties and 3D CFD computations, taking into account the entire turbomachine including the scroll housing, the vaneless gap, the turbine wheel and the axial discharge pipe. A detailed analysis of the flow field through the turbomachine is carried out, both under design and off design conditions, with a particular focus on the entropy field in order to evaluate the loss distribution between the scroll housing, the vaneless gap and the turbine wheel.

scholarly journals Comparative Thermodynamic Analysis of Kalina and Kalina Flash Cycles for Utilizing Low-Grade Heat Sources

Energies ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 3311 ◽  
Author(s):  
Kyoung Kim ◽  
Chul Han ◽  
Hyung Ko
Keyword(s):  
Mass Fraction ◽  
Power Production ◽  
Low Grade ◽  
Heat Sources ◽  
Kalina Cycle ◽  
Thermodynamic Performance ◽  
Locally Maximal ◽  
The Difference ◽  
Proposed Modification ◽  
Low Grade Heat

The Kalina flash cycle (KFC) is a novel, recently proposed modification of the Kalina cycle (KC) equipped with a flash vessel. This study performs a comparative analysis of the thermodynamic performance of KC and KFC utilizing low-grade heat sources. How separator pressure, flash pressure, and ammonia mass fraction affect the system performance is systematically and parametrically investigated. Dependences of net power and cycle efficiencies on these parameters as well as the mass flow rate, heat transfer rate and power production at the cycle components are analyzed. For a given set of separator pressure and ammonia mass fraction, there exists an optimum flash pressure making exergy efficiency locally maximal. For these pressures, which are higher for higher separator pressure and lower ammonia mass fraction, KFC shows better performance than KC both in net power and cycle efficiencies. At higher ammonia mass fraction, however, the difference is smaller. While the maximum power production increases with separator pressure, the dependence is quite weak for the maximum values of both efficiencies.

scholarly journals Cool Steam Method for Desalinating Seawater

Water ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 2385
Author(s):  
Pedro Arnau ◽  
Naeria Navarro ◽  
Javier Soraluce ◽  
Jose Martínez-Iglesias ◽  
Jorge Illas ◽  
...  
Keyword(s):  
Temperature Gradient ◽  
Heat Source ◽  
Latent Heat ◽  
Heat Sink ◽  
Low Grade ◽  
Heat Sources ◽  
Working Pressure ◽  
Multi Stage ◽  
Heat Of Evaporation ◽  
Low Grade Heat

Cool steam is an innovative distillation technology based on low-temperature thermal distillation (LTTD), which allows obtaining fresh water from non-safe water sources with substantially low energy consumption. LTTD consists of distilling at low temperatures by lowering the working pressure and making the most of low-grade heat sources (either natural or artificial) to evaporate water and then condensate it at a cooler heat sink. To perform the process, an external heat source is needed that provides the latent heat of evaporation and a temperature gradient to maintain the distillation cycle. Depending on the available temperature gradient, several stages can be implemented, leading to a multi-stage device. The cool steam device can thus be single or multi-stage, being raw water fed to every stage from the top and evaporated in contact with the warmer surface within the said stage. Acting as a heat carrier, the water vapor travels to the cooler surface and condensates in contact with it. The latent heat of condensation is then conducted through the conductive wall to the next stage. Net heat flux is then established from the heat source until the heat sink, allowing distilling water inside every parallel stage.

Sign in / Sign up

Export Citation Format

Share Document