Optimization of heat recovery steam generator through exergy analysis for combined cycle gas turbine power plants

2008 ◽  
Vol 32 (9) ◽  
pp. 859-869 ◽  
Author(s):  
Jong Soo In ◽  
Sang Yong Lee
Keyword(s):  
Gas Turbine ◽  
Steam Generator ◽  
Heat Recovery ◽  
Power Plants ◽  
Exergy Analysis ◽  
Combined Cycle ◽  
Heat Recovery Steam Generator

scholarly journals Gas Turbine Heat Recovery Steam Generators for Combined Cycles Natural or Forced Circulation Considerations

1988 ◽  
Author(s):  
Akber Pasha
Keyword(s):  
Gas Turbine ◽  
Steam Generator ◽  
Heat Recovery ◽  
Power Plants ◽  
Natural Circulation ◽  
Combined Cycle ◽  
Heat Recovery Steam Generator ◽  
Steam Generators ◽  
Forced Circulation ◽  
Gas Turbine Exhaust

In recent years the combined cycle has become a very attractive power plant arrangement because of its high cycle efficiency, short order-to-on-line time and flexibility in the sizing when compared to conventional steam power plants. However, optimization of the cycle and selection of combined cycle equipment has become more complex because the three major components, Gas Turbine, Heat Recovery Steam Generator and Steam Turbine, are often designed and built by different manufacturers. Heat Recovery Steam Generators are classified into two major categories — 1) Natural Circulation and 2) Forced Circulation. Both circulation designs have certain advantages, disadvantages and limitations. This paper analyzes various factors including; availability, start-up, gas turbine exhaust conditions, reliability, space requirements, etc., which are affected by the type of circulation and which in turn affect the design, price and performance of the Heat Recovery Steam Generator. Modern trends around the world are discussed and conclusions are drawn as to the best type of circulation for a Heat Recovery Steam Generator for combined cycle application.

scholarly journals Study of the effect of using duct burner on the functional parameters of the two repowered cycles through exergy analysis

2017 ◽  
Vol 21 (6 Part B) ◽  
pp. 3011-3023 ◽  
Author(s):  
Mehrabani Maghsoudi ◽  
Abdollah Mehrpanahi ◽  
Vahid Rouhani ◽  
Naser Nikbakht
Keyword(s):  
Power Generation ◽  
Steam Generator ◽  
Heat Recovery ◽  
Power Plants ◽  
Exergy Analysis ◽  
Combined Cycle ◽  
Heat Recovery Steam Generator ◽  
Steam Power ◽  
Steam Power Plants ◽  
Duct Burner

Steam power plants have been extensively used in Iran for a long time, yet no specific step has been taken for promoting their performance. In this regard, full repowering is considered as a way to enhance the performance of steam power plants. Furthermore, because of the continental condition of Iran, duct burners can be used as a common strategy to compensate for power generation shortage caused by environmental conditions. In this study, the effect of using a duct burner on the full repowering of Be?sat Steam Cycle representing both single-and dual-pressure cycles was investigated based on exergy analysis. The results showed that by using the duct burner, due to the increase in the heat recovery steam generator inlet gas temperature, the general thermal efficiency of the combined cycle and the exergy efficiency of the combined cycle and heat recovery steam generator decreased. However, the results revealed an increase in the stack temperature and resulting exergy losses, steam flow and power generation.

scholarly journals Performance Analysis of Combined Cycle with Air Breathing Derivative Gas Turbine, Heat Recovery Steam Generator, and Steam Turbine as LNG Tanker Main Engine Propulsion System

2020 ◽  
Vol 8 (9) ◽  
pp. 726
Author(s):  
Wahyu Nirbito ◽  
Muhammad Arif Budiyanto ◽  
Robby Muliadi
Keyword(s):  
Performance Analysis ◽  
Steam Turbine ◽  
Gas Turbine ◽  
Steam Generator ◽  
Heat Recovery ◽  
Combined Cycle ◽  
Propulsion System ◽  
Heat Recovery Steam Generator ◽  
Main Engine ◽  
Ship Speed

This study explains the performance analysis of a propulsion system engine of an LNG tanker using a combined cycle whose components are gas turbine, steam turbine, and heat recovery steam generator. The researches are to determine the total resistance of an LNG tanker with a capacity of 125,000 m3 by using the Maxsurf Resistance 20 software, as well as to design the propulsion system to meet the required power from the resistance by using the Cycle-Tempo 5.0 software. The simulation results indicate a maximum power of the system of about 28,122.23 kW with a fuel consumption of about 1.173 kg/s and a system efficiency of about 48.49% in fully loaded conditions. The ship speed can reach up to 20.67 knots.

scholarly journals Development Potential of Combined-Cycle (GUD) Power Plants With and Without Supplementary Firing

1991 ◽  
Author(s):  
H. H. Finckh ◽  
H. Pfost
Keyword(s):  
Steam Generator ◽  
Heat Recovery ◽  
Power Plants ◽  
Plant Size ◽  
Combined Cycle ◽  
Nox Emissions ◽  
Heat Recovery Steam Generator ◽  
Low Emission ◽  
Combined Cycles ◽  
Interesting Alternative

Unfired combined cycles achieve superior efficiencies at low emission levels. The potential and efficiency limits are investigated and the possibilities for enhancing efficiency are described. It is demonstrated that limited supplementary firing of the heat recovery steam generator can be an interesting alternative and that this allows efficiency and plant size to be increased. The effects of supplementary firing on NOx emissions are also shown.

scholarly journals The Optimization of Combined Cycle HRSGs as a Function of the Plant Load Duty

1996 ◽  
Author(s):  
P. J. Dechamps
Keyword(s):  
Power Generation ◽  
Steam Generator ◽  
Heat Recovery ◽  
Power Plants ◽  
Combined Cycle ◽  
Load Factor ◽  
Heat Recovery Steam Generator ◽  
Economic Optimization ◽  
Cost Of Electricity ◽  
The Cost

Natural gas fired combined cycle power plants now take a substantial share of the power generation market, mainly because they can be delivering power with a remarkable efficiency shortly after the decision to install is taken, and because they are a relatively low capital cost option. The power generation markets becoming more and more competitive in terms of the cost of electricity, the trend is to go for high performance equipments, notably as far as the gas turbine and the heat recovery steam generator are concerned. The heat recovery steam generator is the essential link in the combined cycle plant, and should be optimized with respect to the cost of electricity. This asks for a techno-economic optimization with an objective function which comprises both the plant efficiency and the initial investment. This paper applies on an example the incremental cost method, which allows to optimize parameters like the pinch points and the superheat temperatures. The influence of the plant load duty on this optimization is emphasized. This is essential, because the load factor will not usually remain constant during the plant life-time. The example which is presented shows the influence of the load factor, which is important, as the plant goes down in merit order with time, following the introduction of more modern, more efficient power plants on the same grid.

scholarly journals Optimization of Gas Turbine HRSG Cycles Some Concepts

1991 ◽  
Author(s):  
Akber Pasha
Keyword(s):  
Gas Turbine ◽  
Steam Generator ◽  
Heat Recovery ◽  
Combined Cycle ◽  
Heat Recovery Steam Generator ◽  
Recent Developments ◽  
Overall Efficiency ◽  
Total Performance

Today the Heat Recovery Steam Generator (HRSG) has become an integral part of the combined cycle or Cogen plant because of its influence on other equipment. Therefore, the optimization of the HRSG has become one of the prime targets to improve the overall efficiency. The paper presents recent developments and concepts used in HRSG design which improve either the efficiency or the range of performance or both. The paper discusses three major areas of a HRSG - Superheater/Reheater, Economizer, and LP Evaporator/Feedwater Preheater. Depending upon the requirement, the user can implement one or more of the concepts to improve the total performance and/or the reliability.

Sign in / Sign up

Export Citation Format

Share Document