Response of a scale‐model pile group for a jacket foundation of an offshore wind turbine in liquefiable ground during shaking table tests

2020 ◽  
Vol 49 (15) ◽  
pp. 1682-1701
Author(s):  
Yung‐Yen Ko ◽  
Yi‐Ting Li
Keyword(s):  
Wind Turbine ◽  
Pile Group ◽  
Shaking Table ◽  
Offshore Wind ◽  
Scale Model ◽  
Offshore Wind Turbine ◽  
Shaking Table Tests ◽  
Model Pile

Experimental Study for SPAR Type Floating Offshore Wind Turbine With Blade-Pitch Control

2013 ◽  
Author(s):  
Toshiki Chujo ◽  
Yoshimasa Minami ◽  
Tadashi Nimura ◽  
Shigesuke Ishida
Keyword(s):  
Wind Turbine ◽  
Wind Farm ◽  
Offshore Wind ◽  
Scale Model ◽  
Offshore Wind Turbine ◽  
Experimental Proof ◽  
Pitch Control ◽  
Model Experiments ◽  
North Eastern ◽  
North Eastern Part

The experimental proof of the floating wind turbine has been started off Goto Islands in Japan. Furthermore, the project of floating wind farm is afoot off Fukushima Prof. in north eastern part of Japan. It is essential for realization of the floating wind farm to comprehend its safety, electric generating property and motion in waves and wind. The scale model experiments are effective to catch the characteristic of floating wind turbines. Authors have mainly carried out scale model experiments with wind turbine models on SPAR buoy type floaters. The wind turbine models have blade-pitch control mechanism and authors focused attention on the effect of blade-pitch control on both the motion of floater and fluctuation of rotor speed. In this paper, the results of scale model experiments are discussed from the aspect of motion of floater and the effect of blade-pitch control.

scholarly journals Mooring Line Damping Estimation for a Floating Wind Turbine

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Dongsheng Qiao ◽  
Jinping Ou
Keyword(s):  
Wind Turbine ◽  
Estimation Method ◽  
Excitation Amplitude ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Scale Model ◽  
Mooring Line ◽  
Offshore Wind Turbine ◽  
Floating Wind Turbine ◽  
Excitation Period

The dynamic responses of mooring line serve important functions in the station keeping of a floating wind turbine (FWT). Mooring line damping significantly influences the global motions of a FWT. This study investigates the estimation of mooring line damping on the basis of the National Renewable Energy Laboratory 5 MW offshore wind turbine model that is mounted on the ITI Energy barge. A numerical estimation method is derived from the energy absorption of a mooring line resulting from FWT motion. The method is validated by performing a 1/80 scale model test. Different parameter changes are analyzed for mooring line damping induced by horizontal and vertical motions. These parameters include excitation amplitude, excitation period, and drag coefficient. Results suggest that mooring line damping must be carefully considered in the FWT design.

scholarly journals Study of Floating Wind Turbine with Modified Tension Leg Platform Placed in Regular Waves

Energies ◽  
2019 ◽  
Vol 12 (4) ◽  
pp. 703 ◽  
Author(s):  
Juhun Song ◽  
Hee-Chang Lim
Keyword(s):  
Wind Turbine ◽  
Real Data ◽  
Offshore Wind ◽  
Scale Model ◽  
Offshore Wind Turbine ◽  
Wave Loads ◽  
Tension Leg Platform ◽  
Mooring Lines ◽  
Floating Wind Turbine ◽  
Wave Conditions

In this study, the typical ocean environment was simulated with the aim to investigate the dynamic response under various environmental conditions of a Tension Leg Platform (TLP) type floating offshore wind turbine system. By applying Froude scaling, a scale model with a scale of 1:200 was designed and model experiments were carried out in a lab-scale wave flume that generated regular periodic waves by means of a piston-type wave generator while a wave absorber dissipated wave energy on the other side of the channel. The model was designed and manufactured based on the standard prototype of the National Renewable Energy Laboratory (NREL) 5 MW offshore wind turbine. In the first half of the study, the motion and structural responses for operational wave conditions of the North Sea near Scotland were considered to investigate the performance of a traditional TLP floating wind turbine compared with that of a newly designed TLP with added mooring lines. The new mooring lines were attached with the objective of increasing the horizontal stiffness of the system and thereby reducing the dominant motion of the TLP platform (i.e., the surge motion). The results of surge translational motions were obtained both in the frequency domain, using the response amplitude operator (RAO), and in the time domain, using the omega arithmetic method for the relative velocity. The results obtained show that our suggested concept improves the stability of the platform and reduces the overall motion of the system in all degrees-of-freedom. Moreover, the modified design was verified to enable operation in extreme wave conditions based on real data for a 100-year return period of the Northern Sea of California. The loads applied by the waves on the structure were also measured experimentally using modified Morison equation—the formula most frequently used to estimate wave-induced forces on offshore floating structures. The corresponding results obtained show that the wave loads applied on the new design TLP had less amplitude than the initial model and confirmed the significant contribution of the mooring lines in improving the performance of the system.

scholarly journals EXPERIMENTAL STUDY ON THE LOADING AND SCOUR OF THE JACKET TYPE OFFSHORE WIND TURBINE FOUNDATION

2011 ◽  
Vol 1 (32) ◽  
pp. 25
Author(s):  
Ray-Yeng Yang ◽  
Hsin-Hung Chen ◽  
Hwung-Hweng Hwung ◽  
Wen-Pin Jiang ◽  
Nian-Tzu Wu
Keyword(s):  
Wind Turbine ◽  
Water Depth ◽  
Fixed Bed ◽  
Offshore Wind ◽  
Scale Model ◽  
Offshore Wind Turbine ◽  
Wave Flume ◽  
Wave Basin ◽  
Scour Protection ◽  
The Impact

A 1:36 scale model tests were carried out in the Medium Wave Flume (MWF) and Near-shore Wave Basin (NSWB) at the Tainan Hydraulics Laboratory (THL) with the jacket type offshore wind turbine foundation located in the test area. The loading of typhoon wave with current on the jacket type offshore wind turbine foundation was investigated in the MWF with fixed bed experiment. Meanwhile, the scour around the jacket type offshore wind turbine foundation exposed to wave and current was conducted in the NSWB with the moveable bed experiment. Two locations (water depth 12m and 16m) of the foundations are separately simulated in this study. Based on the analysis from the former NSWB experimental results, the suitable scour protection of a four-layer work around the foundation is also proposed to the impact of scour. Finally, a four-layer scour protection is tested and found to be effective in preventing scour around jacket type foundation of offshore wind turbines at water depth 12m and 16m.

Numerical Design of a Floating Offshore Wind Turbine Large Scale Model for Control Purposes

2021 ◽  
Author(s):  
Federico Taruffi ◽  
Simone Di Carlo ◽  
Sara Muggiasca ◽  
Alessandro Fontanella
Keyword(s):  
Numerical Model ◽  
Wind Turbine ◽  
Large Scale ◽  
Offshore Wind ◽  
Scale Model ◽  
Offshore Wind Turbine ◽  
Floating Platform ◽  
Floating Offshore Wind Turbine ◽  
Numerical Design ◽  
Blue Growth

Abstract This paper deals with the numerical design of a floating offshore wind turbine outdoor large-scale prototype based on the DTU 10MW. The objective of this work is to develop a numerical simulation environment for the design of an outdoor scaled prototype. The numerical model is realized coupling the preliminary designed Blue Growth Farm large-scale turbine model with a traditional floater, the OC3 spar buoy. The numerical model is used to evaluate the loads associated with the wind turbine when combined to a floating foundation, with the focus on the coupling between the dynamics of the control system and the one of the floating platform. In addition to this, also the consistency of loads on crucial turbine components is an interesting test bench for the evaluation of the dynamical effects and drives the final design of the physical model.

At Sea Experiment of a Hybrid Spar for Floating Offshore Wind Turbine Using 1/10-Scale Model

2013 ◽  
Vol 135 (3) ◽  
Author(s):  
Tomoaki Utsunomiya ◽  
Hidekazu Matsukuma ◽  
Shintaro Minoura ◽  
Kiyohiko Ko ◽  
Hideki Hamamura ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Prestressed Concrete ◽  
Cost Effective ◽  
Offshore Wind ◽  
Scale Model ◽  
Offshore Wind Turbine ◽  
Prototype Model ◽  
Horizontal Axis Wind Turbine ◽  
Floating Offshore Wind Turbine ◽  
Level 3

This study aims at development of a cost-effective, floating offshore wind turbine. The prototype model considered herein is composed of (1) 2-MW horizontal-axis wind turbine (HAWT) of downwind type, (2) steel monotower with 55-m hub height above sea level, (3) steel-prestressed concrete (PC) hybrid SPAR-type foundation with 70-m draft, and (4) catenary mooring system using anchor chains. In order to demonstrate the feasibility of the concept, an at-sea experiment using a 1/10-scale model of the prototype has been made. The demonstrative experiment includes (1) construction of the hybrid SPAR foundation using PC and steel, the same as the prototype; (2) dry-towing and installation to the at-sea site at 30-m distance from the quay of the Sasebo shipbuilding yard; (3) generating electric power using a 1 kW HAWT; and (4) removal from the site. During the at-sea experiment, wind speed, wind direction, tidal height, wave height, motion of the SPAR, tension in a mooring chain, and strains in the tower and the SPAR foundation have been measured. Motion of the SPAR has been numerically simulated and compared with the measured values, where basically good agreement is observed.

Experimental Validation for Motion of a SPAR-Type Floating Offshore Wind Turbine Using 1/22.5 Scale Model

2009 ◽  
Author(s):  
Tomoaki Utsunomiya ◽  
Tomoki Sato ◽  
Hidekazu Matsukuma ◽  
Kiyokazu Yago
Keyword(s):  
Wind Turbine ◽  
Simulation Method ◽  
Offshore Wind ◽  
Irregular Waves ◽  
Scale Model ◽  
Offshore Wind Turbine ◽  
Floating Offshore Wind Turbine ◽  
Wave Basin ◽  
Tank Experiment ◽  
Made In

In this paper, motion of a SPAR-type floating offshore wind turbine (FOWT) subjected to wave loadings is examined. The proposed prototype FOWT mounts a 2MW wind turbine of down-wind type, whose rotor diameter is 80m and hub-height 55m. The SPAR-type floating foundation measures 60m in draft, having circular sections whose diameter is 12m at the lower part, 8.4m at the middle (main) part and 4.8m at the upper part. The FOWT is to be moored by a conventional anchor-chain system. In order to design such a FOWT system, it is essential to predict the motion of the FOWT subjected to environmental loadings such as irregular waves, turbulent winds, currents, etc. In this paper, the motion of the FOWT subjected to regular and irregular waves is examined together with the application of steady horizontal force corresponding to steady wind. The wave-tank experiment is made in the deep sea wave-basin at NMRI (National Maritime Research Institute), using a 1/22.5 scale model of the prototype FOWT. The experimental results are compared with the numerical simulation results for validation of the simulation method.

Sign in / Sign up

Export Citation Format

Share Document