Evaluation of combination rules for peak response calculation in three-component seismic analysis

2003 ◽  
Vol 32 (10) ◽  
pp. 1585-1602 ◽  
Author(s):  
Julio J. Hernández ◽  
Oscar A. López
Keyword(s):  
Seismic Analysis ◽  
Combination Rules ◽  
Peak Response

A Clarification of the Orthogonal Effects in a Three-Dimensional Seismic Analysis

1995 ◽  
Vol 11 (4) ◽  
pp. 659-666 ◽  
Author(s):  
Edward L. Wilson ◽  
Iqbal Suharwardy ◽  
Ashraf Habibullah
Keyword(s):  
Structural Design ◽  
Reference System ◽  
Theoretical Basis ◽  
Seismic Analysis ◽  
Three Dimensional ◽  
Response Spectra ◽  
Perpendicular Direction ◽  
Combination Rules ◽  
Seismic Forces ◽  
Selection Of

For response spectra analyses it is shown that the “design of elements for 100 percent of the prescribed seismic forces in one direction plus 30 or 40 percent of the prescribed forces applied in the perpendicular direction” is dependent on the user's selection of the reference system. These commonly used “percentage combination rules” have no theoretical basis and can underestimate the design forces in certain members and can produce a member design which is relatively weak in one direction. It is proven that the alternate code approved method, in which a SRSS combination of two 100 percent spectra analyses with respect to any user defined orthogonal axes, will produce design forces which are not a function of the reference system and results in a structural design which has equal resistance to seismic motions from all directions.

SEISMIC ANALYSIS OF MULTISTOREY REINFORCED CONCRETE STRUCTURES

2019 ◽  
Vol 9 (1) ◽  
pp. 61
Author(s):  
SINGH RAVIKANT ◽  
KUMAR SINGH VINAY ◽  
YADAV MAHESH ◽  
◽  
◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Seismic Analysis ◽  
Concrete Structures ◽  
Reinforced Concrete Structures

Comparison of Interstorey Drift in General RC Buildings in Pounding and No Pounding Case

2020 ◽  
Vol 2 (1) ◽  
pp. 40-47
Author(s):  
Anand Dev Bhatt
Keyword(s):  
Seismic Analysis ◽  
Linear Time ◽  
Time History ◽  
Case Analysis ◽  
Rc Buildings ◽  
Adjacent Buildings ◽  
Sufficient Distance ◽  
Earthquake Load ◽  
Interstorey Drift ◽  
Lower Height

 Inter-storey drift is an important parameter of structural behavior in seismic analysis of buildings. Pounding effect in building simply means collision between adjacent buildings due to earthquake load caused by out of phase vibration of adjacent buildings. There is variation in inter-storey drift of adjacent buildings during pounding case and no pounding case. The main objective of this research was to compare the inter-storey drift of general adjacent RC buildings in pounding and no pounding case. For this study two adjacent RC buildings having same number of stories have been considered. For pounding case analysis there is no gap in between adjacent buildings and for no pounding case analysis there is sufficient distance between adjacent buildings. The model consists of adjacent buildings having 4 and 4 stories but unequal storey height. Both the buildings have same material & sectional properties. Fast non-linear time history analysis was performed by using El-centro earthquake data as ground motion. Adjacent buildings having different overall height were modelled in SAP 2000 v 15 using gap element for pounding case. Finally, analysis was done and inter-storey drift was compared. It was found that in higher building inter-storey drift is greater in no pounding case than in pounding case but in adjacent lower height building the result was reversed. Additionally, it was found that in general residential RC buildings maximum inter-storey drift occurs in 2nd floor.

SEISMIC VULNERABILITY ASSESSMENT FOR SAN FRANCISCO TEMPLE IN MORELIA, MEXICO

2019 ◽  
Vol 3 (Special Issue on First SACEE'19) ◽  
pp. 207-2016
Author(s):  
Guillermo Martinez ◽  
David Castillo ◽  
José Jara ◽  
Bertha Olmos
Keyword(s):  
San Francisco ◽  
Seismic Vulnerability ◽  
Seismic Analysis ◽  
Three Dimensional ◽  
Middle Part ◽  
Seismic Demands ◽  
Modeling And Analysis ◽  
Seismic Records ◽  
Cracking Pattern ◽  
The Temple

This paper presents a first approximation of the seismic vulnerability of a sixteenth century building which is part of the historical center of Morelia, Mexico. The city was declared World Heritage by United Nations Educational, Scientific and Cultural Organization in 1991. The modeling and analysis of the building was carried out using a three-dimensional elastic tetrahedral finite elements model which was subjected to probabilistic seismic demands with recurrences of 500 yrs and 1000 yrs in addition to real seismic records. The model was able to correctly identify cracking pattern in different parts of the temple due to gravitational forces. High seismic vulnerability of the arched window and the walls of the middle part of the bell tower of the temple was indicated by the seismic analysis of the model.

A SIMPLIFIED ANALYTICAL PROCEDURE FOR SEISMIC ANALYSIS OF TIMBER LIGHT-FRAME SHEAR WALLS

2019 ◽  
Vol 3 (Special Issue on First SACEE'19) ◽  
pp. 173-180
Author(s):  
Giorgia Di Gangi ◽  
Giorgio Monti ◽  
Giuseppe Quaranta ◽  
Marco Vailati ◽  
Cristoforo Demartino
Keyword(s):  
Analytical Procedure ◽  
Seismic Analysis ◽  
Shear Walls ◽  
Element Model ◽  
Sensitivity Analyses ◽  
Width Ratio ◽  
Damping Factor ◽  
Equivalent Viscous Damping ◽  
Design Variables ◽  
Depth Analysis

The seismic performance of timber light-frame shear walls is investigated in this paper with a focus on energy dissipation and ductility ensured by sheathing-to-framing connections. An original parametric finite element model has been developed in order to perform sensitivity analyses. The model considers the design variables affecting the racking load-carrying capacity of the wall. These variables include aspect ratio (height-to-width ratio), fastener spacing, number of vertical studs and framing elements cross-section size. A failure criterion has been defined based on the observation of both the global behaviour of the wall and local behaviour of fasteners in order to identify the ultimate displacement of the wall. The equivalent viscous damping has been numerically assessed by estimating the damping factor which is in use in the capacity spectrum method. Finally, an in-depth analysis of the results obtained from the sensitivity analyses led to the development of a simplified analytical procedure which is able to predict the capacity curve of a timber light-frame shear wall.

Sign in / Sign up

Export Citation Format

Share Document