Performance of roof‐cool paints prepared using organic acrylic polymer binder and inorganic additives for the thermal reduction in buildings

2021 ◽  
Author(s):  
Shreyash Raj Suwal ◽  
Arun Prasath Ramaswamy
Keyword(s):  
Thermal Reduction ◽  
Polymer Binder ◽  
Acrylic Polymer

Use of Impact-Echo Method to Test High-Temperature Degraded Cementitious Composite Materials Containing Rubber Aggregates and Acrylic Polymer Binder

2014 ◽  
Vol 897 ◽  
pp. 238-241 ◽  
Author(s):  
Daniela Štefková ◽  
Michael Tupý ◽  
Kristýna Šamárková ◽  
Zdeněk Chobola ◽  
Konstantinos Sotiriadis ◽  
...  
Keyword(s):  
High Temperature ◽  
Acoustic Method ◽  
Temperature Treatment ◽  
Polymer Binder ◽  
High Temperature Treatment ◽  
Cementitious Composite ◽  
Acrylic Polymer ◽  
Impact Echo ◽  
Rubber Aggregates ◽  
Impact Echo Method

The present paper deals with the use of Impact-echo acoustic method to test cement-based mortar composites degraded at high temperatures. The specimens were prepared by using a type CEM I Portland cement and siliceous sand, as well as by substituting 25% of sand with shredded automobile tires and by adding acrylic polymer binder (20% w/w to cement mass). The samples were were subjected to high-temperature treatment in the temperature range of 200-400 °C. The acoustic results confirmed the differences in the structure of mortar specimens. The addition of rubber aggregates in H2 and H3 specimens resulted in lower frequencies compared to H1 specimen. It was also observed the dropping down of the frequencies for the temperatures between 200-300°C, indicating that the effect of heat treatment was mitigated when the acrylic binder was added.

Specific volume and features of compressibility during the molding of powder-polymer mixtures with wax-polypropylene binder

2019 ◽  
pp. 25-33
Author(s):  
Alexander Muranov ◽  
Alexey Semenov ◽  
Anatoly Kutsbakh ◽  
Boris Semenov
Keyword(s):  
Phase Transition ◽  
Comparative Analysis ◽  
Powder Metallurgy ◽  
Injection Molding ◽  
Polymer Binder ◽  
Polymer Mixture ◽  
Powder Injection ◽  
Polymer Mixtures ◽  
Pvt Data ◽  
Mathematical Processing

The article discusses one of the modern areas of powder metallurgy – the technology of manufacturing shaped parts by the powder injection molding (PIM). For the powder-polymer mixture (feedstock) with a wax-polypropylene binder of the solvent-thermal type of removal by isobaric volume dilatometry, the dependence of PVT state parameters was studied. For each component of the polymer binder, the dependence of pressure on the temperature of phase transition was obtained. As a result of mathematical processing and analysis of PVT data for the feedstock of the studied type, a technological window of parameters has been determined that allows injection molding of «green parts» with minimal volume shrinkage. The results of a comparative analysis of the compaction of feedstock with a polymer binder catalytic and solution-thermal type of removal are presented.

ANALYSIS OF WORK ON NANOSTRUCTURED MATERIALS IN ORTHOPEDIC DENTISTRY UNDER THE DIRECTION OF PROFESSOR E.S. KALIVRADZHIYAN

2020 ◽  
pp. 8-13
Author(s):  
Жанна Владимировна Вечеркина ◽  
Наталия Владимировна Чиркова ◽  
Михаил Анатольевич Крючков ◽  
Виктор Сергеевич Калиниченко
Keyword(s):  
Nanostructured Materials ◽  
Dental Materials ◽  
Physical And Mechanical Properties ◽  
High Strength ◽  
Barrier Properties ◽  
Working Time ◽  
Polymerization Process ◽  
High Tech ◽  
Acrylic Polymer ◽  
Removable Plate

Развитие технологий, основанных на использовании низкотоксичных материалов, позволит в скором будущем начать их применение в медицине. Применение наночастиц серебра, меди, кремния, цинка, титана, кобальта в качестве модифицирующей добавки позволит оказать активное влияние на структуру исходных материалов и изменение их свойств, а именно улучшение физико-механических, физико-химических и токсико-гигиенических свойств материалов. Наноразмерные частицы кремния, введенные в фиксирующие стоматологические материалы, приводят к улучшению физико-химических, физико-механических свойств кристаллизующихся материалов, а малая теплопроводность кремния может увеличить его рабочее время и снизить выделение тепла при реакции кристаллизации. Так как от этих характеристик зависит объем манипуляций, при фиксации ортопедических конструкций на опорных зубах целесообразно было бы привести рабочее время твердения к чистому времени твердения, что позволит увеличить объем манипуляций приготовленной массой без ухудшения ее свойств. Разработка высокопрочных, биосовместимых, высокотехнологичных нанопластмасс для базисов съемных пластиночных протезов является актуальной проблемой повышения качества жизни пациентов. Модификация наноразмерными частицами серебра, кремния акрилового полимера позволит улучшить такие физико-механические свойства, как ударную вязкость, прочность, температуростойкость, барьерные свойства, уменьшить усадку полимера на этапе полимеризации, в отличие от уже известных отечественных и дорогостоящих импортных полимеров. Наноразмерные частицы кремния, серебра являются сокатализаторами метилметакрилата, влияющими на уменьшение количества остаточного мономера после процесса полимеризации, тем самым повышая санитарно-химические и токсико-гигиенические характеристики полимера. Все вышеизложенное позволило сформулировать цель исследований по наноструктурированным материалам под руководством профессора …посвящается памяти профессора, д.м.н. Каливраджияна Э.С. The development of technologies based on the use of low-toxic materials will make it possible to begin their application in medicine in the near future. The use of nanoparticles of silver, copper, silicon, zinc, titanium, cobalt as a modifying additive will make it possible to actively influence the structure of the starting materials and change their properties, namely, improve the physicomechanical, physicochemical and toxicohygienic properties of materials. Nanosized silicon particles introduced into fixing dental materials lead to an improvement in the physicochemical, physicomechanical properties of crystallizing materials, and the low thermal conductivity of silicon can increase its working time and reduce heat generation during the crystallization reaction. Since the volume of manipulations depends on these characteristics, when fixing orthopedic structures on abutment teeth, it would be advisable to bring the working time of hardening to a pure hardening time, which will increase the volume of manipulations with the prepared mass without deteriorating its properties. The development of high-strength, biocompatible, high-tech nanoplastics for the bases of removable plate prostheses is an urgent problem to improve the quality of life of patients. Modification of acrylic polymer with nano-sized particles of silver and silicon will improve such physical and mechanical properties as impact strength, strength, temperature resistance, barrier properties, and reduce polymer shrinkage at the stage of polymerization, in contrast to the already known domestic and expensive imported polymers. Nanosized particles of silicon, silver are cocatalysts of methyl methacrylate, affecting the reduction of the amount of residual monomer after the polymerization process, thereby increasing the sanitary-chemical and toxic-hygienic characteristics of the polymer. All of the above made it possible to formulate the goal of research on nanostructured materials under the guidance of the professor …dedicated to the memory of the professor, d.m.s. Kalivrajiyan E.S.

Synthesis of Cu/rGO composites by chemical and thermal reduction of graphene oxide

2019 ◽  
Vol 800 ◽  
pp. 379-391 ◽  
Author(s):  
P. Vázquez-Sánchez ◽  
M.A. Rodríguez-Escudero ◽  
F.J. Burgos ◽  
I. Llorente ◽  
O. Caballero-Calero ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Thermal Reduction
Sign in / Sign up

Export Citation Format

Share Document