Cadmium cation uptake through amine and acid post‐functionalized Santa Barbara Amorphous materials; comprehensive adsorption studies

The Effect of Temperature and Time of the Hydrothermal Treatment in the SBA-15 Synthesis Process on the Structure and Textural Properties and the Ability to Reduce the Evolution of Tars in Tobacco Smoking

Catalysts ◽

10.3390/catal10030272 ◽

2020 ◽

Vol 10 (3) ◽

pp. 272

Author(s):

Nerea Juárez-Serrano ◽

Javier Asensio ◽

Isabel Martínez-Castellanos ◽

Maribel Beltrán ◽

Antonio Marcilla

Keyword(s):

Hydrothermal Treatment ◽

Amorphous Materials ◽

Marked Effect ◽

Textural Properties ◽

Effect Of Temperature ◽

Synthesis Process ◽

X Ray Diffraction ◽

Santa Barbara ◽

X Ray ◽

Tar Reduction

Different SBA-15 (SBA, Santa Barbara Amorphous) materials were synthetized at different temperature and time during of the hydrothermal treatment. The obtained SBA-15 were characterized by N2 adsorption isotherms, scanning electron microscopy (SEM), X-ray diffraction (DRX), and density in order to establish the influence of these variables on their properties. Mixtures of the obtained catalysts with 3R4F tobacco were prepared and smoked under the ISO 3308 conditions. Temperature of the hydrothermal treatment slightly affects the tars that evolved in the smoking process of the corresponding catalyst tobacco mixtures. Contrarily, the time of the hydrothermal treatment has a marked effect on the reductions of toxic compounds in the smoke. Developed porosity has a positive correlation with the observed tar reduction, whereas the apparent density has a negative correlation with the reduction in toxicity. Moreover, the removal of the supernatant liquors during the hydrothermal treatment does not strongly modify the properties of the materials and may represent an interesting simplification of the process.

Download Full-text

AEM analysis of crystallization in Ti-based amorphous alloys

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100075142 ◽

1983 ◽

Vol 41 ◽

pp. 270-271

Author(s):

A.R. Pelton ◽

A.F. Marshall ◽

Y.S. Lee

Keyword(s):

Magnetic Properties ◽

Amorphous Alloys ◽

Amorphous Materials ◽

Isothermal Annealing ◽

Amorphous Matrix ◽

Nucleation And Growth ◽

Current Interest ◽

Amorphous Films ◽

Electrical And Magnetic Properties

Amorphous materials are of current interest due to their desirable mechanical, electrical and magnetic properties. Furthermore, crystallizing amorphous alloys provides an avenue for discerning sequential and competitive phases thus allowing access to otherwise inaccessible crystalline structures. Previous studies have shown the benefits of using AEM to determine crystal structures and compositions of partially crystallized alloys. The present paper will discuss the AEM characterization of crystallized Cu-Ti and Ni-Ti amorphous films.Cu60Ti40: The amorphous alloy Cu60Ti40, when continuously heated, forms a simple intermediate, macrocrystalline phase which then transforms to the ordered, equilibrium Cu3Ti2 phase. However, contrary to what one would expect from kinetic considerations, isothermal annealing below the isochronal crystallization temperature results in direct nucleation and growth of Cu3Ti2 from the amorphous matrix.

Download Full-text

TEM studies of amorphization processes and amorphous structures

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100104303 ◽

1988 ◽

Vol 46 ◽

pp. 448-449

Author(s):

T. E. Mitchell ◽

R. B. Schwarz

Keyword(s):

Amorphous Materials ◽

Fission Products ◽

Rapid Quenching ◽

Surface Films ◽

List Type ◽

Oxide Glasses ◽

Crystalline Materials ◽

Amorphous Structures ◽

Amorphous Surface ◽

Interfacial Films

Traditional oxide glasses occur naturally as obsidian and can be made easily by suitable cooling histories. In the past 30 years, a variety of techniques have been discovered which amorphize normally crystalline materials such as metals. These include [1-3]:Rapid quenching from the vapor phase.Rapid quenching from the liquid phase.Electrodeposition of certain alloys, e.g. Fe-P.Oxidation of crystals to produce amorphous surface oxide layers.Interdiffusion of two pure crystalline metals.Hydrogen-induced vitrification of an intermetal1ic.Mechanical alloying and ball-milling of intermetal lie compounds.Irradiation processes of all kinds using ions, electrons, neutrons, and fission products.We offer here some general comments on the use of TEM to study these materials and give some particular examples of such studies.Thin specimens can be prepared from bulk homogeneous materials in the usual way. Most often, however, amorphous materials are in the form of surface films or interfacial films with different chemistry from the substrates.

Download Full-text

Analysis of Dark-Field Images of Disordered Materials

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100096059 ◽

1972 ◽

Vol 30 ◽

pp. 560-561

Author(s):

J. M. Cowley

Keyword(s):

Amorphous Materials ◽

Careful Analysis ◽

Dark Field ◽

Minimum Diameter ◽

Statistical Fluctuations ◽

Bright Spots ◽

Sufficient Detail ◽

Random Arrangement ◽

Diffraction Patterns ◽

Imaging Conditions

Recently a number of authors have reported detail in dark-field images obtained from diffuse-scattering regions of electron diffraction patterns. Bright spots in images from short-range order diffuse peaks of disordered binary alloys have been interpreted as evidence for the existence of microdomains of ordered lattice or of segragated clusters of one component. Spotty contrast in dark field images of near-amorphous materials has been interpreted as evidence for the existense of microcrystals. Without a careful analysis of the imaging conditions such conclusions may be invalid. Usually the conditions of the experiment have not been specified in sufficient detail to allow evaluation of the conclusions.Elementary considerations show that even for a completely random arrangement of atoms the statistical fluctuations of density will give a spotty contrast with spots of minimum diameter determined by the dark field aperture size and other factors influencing the minimum resolvable distance under darkfield imaging conditions, including fluctuations and drift over long exposure times (resolution usually 10Å or more).

Download Full-text

Simulations of high-resolution images of amorphous silicon films

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010014419x ◽

1986 ◽

Vol 44 ◽

pp. 544-545

Author(s):

G. Y. Fan ◽

J. M. Cowley

Keyword(s):

Electron Microscope ◽

High Frequency ◽

Fourier Transformation ◽

Amorphous Materials ◽

Low Frequency ◽

Chromatic Aberration ◽

Structure Information ◽

Frequency Components ◽

High Resolution Images ◽

Spatial Frequency Spectrum

It is well known that the structure information on the specimen is not always faithfully transferred through the electron microscope. Firstly, the spatial frequency spectrum is modulated by the transfer function (TF) at the focal plane. Secondly, the spectrum suffers high frequency cut-off by the aperture (or effectively damping terms such as chromatic aberration). While these do not have essential effect on imaging crystal periodicity as long as the low order Bragg spots are inside the aperture, although the contrast may be reversed, they may change the appearance of images of amorphous materials completely. Because the spectrum of amorphous materials is continuous, modulation of it emphasizes some components while weakening others. Especially the cut-off of high frequency components, which contribute to amorphous image just as strongly as low frequency components can have a fundamental effect. This can be illustrated through computer simulation. Imaging of a whitenoise object with an electron microscope without TF limitation gives Fig. 1a, which is obtained by Fourier transformation of a constant amplitude combined with random phases generated by computer.

Download Full-text

Multislice calculations for quasi-periodic and non-periodic objects

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100173820 ◽

1990 ◽

Vol 48 (4) ◽

pp. 138-139

Author(s):

R. Herrera ◽

A. Gómez

Keyword(s):

Electron Diffraction ◽

Computer Simulations ◽

Periodic Table ◽

Amorphous Materials ◽

Space Group ◽

Essential Step ◽

Shape Effects ◽

Atomic Scattering ◽

Diffraction Patterns ◽

Periodic Continuation

Computer simulations of electron diffraction patterns and images are an essential step in the process of structure and/or defect elucidation. So far most programs are designed to deal specifically with crystals, requiring frequently the space group as imput parameter. In such programs the deviations from perfect periodicity are dealt with by means of “periodic continuation”.However, for many applications involving amorphous materials, quasiperiodic materials or simply crystals with defects (including finite shape effects) it is convenient to have an algorithm capable of handling non-periodicity. Our program “HeGo” is an implementation of the well known multislice equations in which no periodicity assumption is made whatsoever. The salient features of our implementation are: 1) We made Gaussian fits to the atomic scattering factors for electrons covering the whole periodic table and the ranges [0-2]Å−1 and [2-6]Å−1.

Download Full-text