Energetic and exergetic carbon dioxide equivalents and prices of the energy sources for buildings in Turkey

2017 ◽  
Vol 37 (2) ◽  
pp. 912-925 ◽  
Author(s):  
Ibrahim Yildiz ◽  
Hakan Caliskan
Keyword(s):  
Carbon Dioxide ◽  
Energy Sources ◽  
Carbon Dioxide Equivalents

scholarly journals Biohydrogen from Microalgae: Production and Applications

2021 ◽  
Vol 11 (4) ◽  
pp. 1616
Author(s):  
Antonina Rita Limongi ◽  
Emanuele Viviano ◽  
Maria De Luca ◽  
Rosa Paola Radice ◽  
Giuliana Bianco ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Environmental Impact ◽  
Carbon Dioxide Emissions ◽  
Alternative Energy ◽  
Electricity Production ◽  
Energy Sources ◽  
Molecular Processes ◽  
Significant Development ◽  
Alternative Energy Sources ◽  
Natural Way

The need to safeguard our planet by reducing carbon dioxide emissions has led to a significant development of research in the field of alternative energy sources. Hydrogen has proved to be the most promising molecule, as a fuel, due to its low environmental impact. Even if various methods already exist for producing hydrogen, most of them are not sustainable. Thus, research focuses on the biological sector, studying microalgae, and other microorganisms’ ability to produce this precious molecule in a natural way. In this review, we provide a description of the biochemical and molecular processes for the production of biohydrogen and give a general overview of one of the most interesting technologies in which hydrogen finds application for electricity production: fuel cells.

scholarly journals Comment on "Soil CO<sub>2</sub>, CH<sub>4</sub> and N<sub>2</sub>O fluxes from an afforested lowland raised peat bog in Scotland: implications for drainage and restoration" by Yamulki et al. (2013)

2013 ◽  
Vol 10 (11) ◽  
pp. 7623-7630 ◽  
Author(s):  
R. R. E. Artz ◽  
S. J. Chapman ◽  
M. Saunders ◽  
C. D. Evans ◽  
R. B. Matthews
Keyword(s):  
Carbon Dioxide ◽  
Nitrous Oxide ◽  
Ghg Emissions ◽  
Peat Bog ◽  
Raised Bog ◽  
Land Use Conversion ◽  
Peatland Restoration ◽  
Carbon Dioxide Equivalents ◽  
Carbon Dioxide Co2 ◽  
Chamber Measurements

Abstract. Yamulki and co-authors address in their recent publication the important issue of net emissions of greenhouse gases (GHGs) from peatlands where land use conversion has taken place. In their case, they studied conversion to forestry versus peatland restoration after a first rotation of plantation forestry. They monitored soil-derived fluxes of carbon dioxide (CO2), methane (CH4) and nitrous oxide (N2O) using opaque chamber measurements on planted and unplanted control treatments (with or without drainage), and an unplanted plot within a restored (felled) block on former lowland raised bog. They propose that their measurements of greenhouse gas (GHG) emissions at these sites suggest that the total net GHG emissions, in 100 yr carbon dioxide equivalents, of the restored peat bog would be higher than that of the peat bog with trees. We believe there are a number of issues with the measurement, calculation and comparison of these greenhouse budgets that may invalidate this conclusion.

scholarly journals The Hungarian Wood-Based Panel Industry and its Impact on the Environment

2016 ◽  
Vol 12 (2) ◽  
pp. 157-172
Author(s):  
Gábor Laborczy ◽  
András Winkler
Keyword(s):  
Carbon Dioxide ◽  
Power Plants ◽  
Negative Impact ◽  
Value Added ◽  
Forest Products ◽  
Air Pollutant ◽  
Raw Material ◽  
Energy Sources ◽  
Forest Products Industry ◽  
Round Wood

Abstract It is well known that worldwide deforestation has a negative impact on the global environment. Forests play an important role in producing oxygen as well as retaining gases that create the greenhouse effect. Forests primarily absorb carbon dioxide, the major air pollutant released by the industrial activities. Energy production is the major source of environmental contamination. In addition to reducing CO2 emissions, another issue this industrial sector must tackle is to decrease the use of fossil fuels by substituting them with renewable, environmentally friendly energy sources. One of the answers to these challenges is the utilization of biomass as energy sources. However, biomass-based fuels include short bolts, split round-wood, pulpwood, bark and by-products of sawmilling, which are the raw materials for the wood-based panel industry as well.Wood utilization of the forest products industry has a major impact on the delayed release of carbon dioxide stored in the wood. All over the world, just as in Hungary, the wood-based panel industry mainly uses low quality wood resources and turns them into value added products. The elongation of the life cycle of low quality wood materials decreases CO2 emissions, thus significantly contributing to environmental protection. Furthermore, it is assumed that raw material demand of the wood-based panel industry could be satisfied by focusing on sustainable forest management and well-planned reforestation. Additionally, special energy-plantations may provide extra wood resources, while waste and other non-usable parts of trees contribute to the effective and economic operation of biomass utilizing power-plants. This paper summarizes the current situation of the Hungarian wood-based panel industry and discusses the effects of the panel manufacturing processes on the environment. Also, it outlines the possible future of this important segment of the forest products industry.

scholarly journals THE USE OF ENVIRONMENTAL WASTE IN THE ISSUE OF GREEN ECONOMY OF THE REGIONS

2021 ◽  
Author(s):  
M. Opara ◽  
Natalia Azarova
Keyword(s):  
Carbon Dioxide ◽  
Alternative Energy ◽  
Raw Materials ◽  
Human Life ◽  
Raw Material ◽  
Green Economy ◽  
Energy Sources ◽  
Alternative Energy Sources ◽  
Solid Liquid ◽  
State Of The Environment

Currently, an urgent issue is the preservation of the environment, the cyclical use of waste for the production of new products, the preservation and multiplication of the planet’s natural resources. After all, the quality of life of each person directly depends on the state of the environment and the factors that affect its preservation. These factors are an integral part of the development of a green economy. This article discusses the possibility of producing alternative energy sources, such as biofuels of three generations.The first generation is solid, liquid, and gaseous biofuels. Second-generation fuel is obtained from the biomass of plant and animal material residues, or grown crops. As an example, such a type of fuel as biogas, which consists of carbon dioxide and methane, and with its further processing, namely the separation of carbon dioxide, you can get biomethane. In the same way, such fuels as biodiesel and bioethanol can be obtained from the biological mass. And the most unusual raw material for the production of third-generation fuel is biofuel from algae. Unfortunately, the development of the green economy in Russia is taking slow steps, but at present this issue is being paid more attention. The development of technologies for obtaining alternative energy sources will allow us to produce not only new types of energy, but also to preserve the environment of our priceless planet, through the use of raw materials and waste that are not in demand in everyday human life.

scholarly journals Implementing Agricultural Pruning to Energy in Europe: Technical, Economic and Implementation Potentials

Energies ◽  
2019 ◽  
Vol 12 (8) ◽  
pp. 1513 ◽  
Author(s):  
Arkadiusz Dyjakon ◽  
Daniel García-Galindo
Keyword(s):  
Carbon Dioxide ◽  
European Union ◽  
Renewable Energy ◽  
Carbon Dioxide Emissions ◽  
Renewable Energy Sources ◽  
Mediterranean Area ◽  
Energy Sources ◽  
Value Chains ◽  
Economic Potential ◽  
Technical Potential

The use of new sources of biomass residues for energy purposes in Europe is crucial for increasing the share of renewable energy sources and the limitation of carbon dioxide emissions. The residues coming from regular pruning of permanent crops are an alternative to conventional fuels. The paper is focused on the assessment of European pruning potentials in European Union (EU28) in line with the nomenclature of territorial units (NUTs) at NUTs0, NUTs2 and NUTs3 level. The assessment indicates that the yearly theoretical and technical potential of that biomass is 13.67 MtDM (or 252.0 PJ·yr−1) and 12.51 MtDM (or 230.6 PJ·yr−1), respectively. The economic potential has been assessed based on different management or exploitation models: management of pruning as a waste, self-consumption, and demand-driven mobilisation by consumption centres at small, medium and large scales. The utilisation of pruning when gathering is compulsory coincides with the technical potential. Under self-consumption, up to 10.98 MtDM per year could be effectively mobilised (202.3 PJ·yr−1). The creation of new value chains for delivery of pruning biomass ranges 7.30 to 8.69 MtDM per year (from 134.5 to 160.2 PJ·yr−1). When applying further constraints related to other existing uses the implementation of the potential further descends, ranging from 6.18 to 10.66 MtDM per year (from 113.9 to 196.4 PJ·yr−1). The analysis shows that the amount of available pruning residues is regionally scattered; however, most of them (ca. 80%) are located in the Mediterranean area.

scholarly journals A Decision-Making Algorithm for Energo-Economic Sustainability and Efficiency in Buildings: A Case Study in Turkey

2019 ◽  
Vol 111 ◽  
pp. 03024
Author(s):  
Derya Kışla Tekin ◽  
Levent Çolak ◽  
Birol Kılkış
Keyword(s):  
Carbon Dioxide ◽  
Decision Making ◽  
Hybrid Systems ◽  
Green Building ◽  
Hvac Systems ◽  
Payback Period ◽  
Energy Sources ◽  
Line Energy ◽  
System Combination

Today, sustainability and energy efficiency are of prime importance in satisfaction of thermal and electrical loads of buildings. In this study, innovative hybrid solutions alternative to conventional HVAC systems are investigated. Objective of study is to minimize the payback period and CO2 emissions are main objectives. For conventional HVAC systems two sources of energy, namely natural gas and electricity were considered as the base line. Energy sources for the innovative methods were considered to be solar energy, ground heat and waste heat. Conventional system was considered to be a backup system when innovative energy resources are insufficient. Hourly heating, cooling and electrical power loads of Eser Green Building, which already has LEED Platinum certificate were used for the case study, which aims to further improve the energy and exergy efficiency. In the new algorithm being developed, all power conversion systems were defined in a simple input- output transfer function format. A decision-making algorithm and an ExcelTM-based simulation program were developed and tried with Eser Green Building input data for different renewable energy source and system combination conventional systems, energy sources, and equipment in term of investment, operation and total cost, payback period, and carbon dioxide emission values. Payback period of Eser green building is 11,8 years and for two hybrid systems are 13,2 years and 9,2 years, respectively. Carbon dioxide emissions by hybrid systems under the same load conditions were found to be 488 kgCO2/h and 592 kgCO2/h for approaches, respectively.

Energy sources and carbon dioxide waste

2013 ◽  
Vol 25 (1) ◽  
pp. 113-117 ◽  
Author(s):  
Adriano Zecchina
Keyword(s):  
Carbon Dioxide ◽  
Energy Sources

scholarly journals Mechanical Properties of Fly Ash Based Geopolymer Concrete and Conventional Concrete

2020 ◽  
Vol 8 (6) ◽  
pp. 3121-3127
Keyword(s):  
Carbon Dioxide ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Personal Satisfaction ◽  
Portland Cement Concrete ◽  
Cement Concrete ◽  
Conventional Concrete ◽  
The World ◽  
Water Right ◽  
The Creation

Creation of concrete includes devouring of common non-sustainable assets. The concrete ventures have been ordered as profoundly dirtying enterprises. It is relevant to utilize eco-accommodating strategies in a manner to supplant, lessen or reuse the customary materials to be utilized in cements (Portland Cement Concrete). Solid utilization is underdog to water right now. Normal Portland concrete is ordinarily utilized as basically fastener to create concrete because of its accessibility of the crude materials everywhere throughout the world. The use of cement has extraordinarily affected the cutting edge world in framework, home and transportation, advancing the improvement of monetary advancement, human advancement and personal satisfaction. The natural issues related with the creation of OPC is notable, the measure of carbon dioxide discharged during the production of OPC because of calcinations of limestone and ignition of non-renewable energy sources is high. It is well kwon truth that creation of 1 kg of concretes delivers almost 1 kg of carbon dioxide. The degree of vitality required to deliver OPC is just beside steel and Aluminum so there is a need to conserve concrete. One of the solid answers for conserve concrete is to supplant with other strengthening establishing materials like fly debris, slag, meta kaolin, and so on then again the bottomless accessibility of fly debris, which being a side-effect of coal-based force plants the world over making a chance to enhance to OPC with fly debris. The all out creation of fly debris is almost as same as concrete, however our use of fly debris is just 5% of the creation, subsequently the utilization of fly debris ought to be improved.

Sign in / Sign up

Export Citation Format

Share Document