scholarly journals Dynamic Simulation of Fixed-Bed Chemical-Looping Combustion Reactors Integrated in Combined Cycle Power Plants

2016 ◽  
Vol 4 (10) ◽  
pp. 1209-1220 ◽  
Author(s):  
Chen Chen ◽  
Lu Han ◽  
George M. Bollas
Keyword(s):  
Dynamic Simulation ◽  
Power Plants ◽  
Fixed Bed ◽  
Combined Cycle ◽  
Chemical Looping Combustion ◽  
Chemical Looping

Investigation of a Novel Gas Turbine Cycle With Coal Gas Fueled Chemical-Looping Combustion

2000 ◽  
Author(s):  
Hongguang Jin ◽  
Masaru Ishida
Keyword(s):  
Natural Gas ◽  
Fixed Bed ◽  
Combined Cycle ◽  
Fixed Bed Reactor ◽  
Chemical Looping Combustion ◽  
Chemical Looping ◽  
Gas Combustion ◽  
Coal Gas ◽  
New Type ◽  
Oxidation Reactor

Abstract A new type of integrated gasification combined cycle (IGCC) with chemical-looping combustion and saturation for air is proposed and investigated. Chemical-looping combustion may be carried out in two successive reactions between two reactors, a reduction reactor (coal gas with metal oxides) and an oxidation reactor (the reduced metal with oxygen in air). The study on the new system has revealed that the thermal efficiency of this new-generation power plant will be increased by approximately 10–15 percentage points compared to the conventional IGCC with CO2 recovery. Furthermore, to develop the chemical-looping combustor, we have experimentally examined the kinetic behavior between solid looping materials and coal gas in a high-pressure fixed bed reactor. We have identified that the coal gas chemical-looping combustor has much better reactivity, compared to the natural gas one. This finding is completely different from the direct combustion in which combustion with natural gas is much easier than that with other fuels. Hence, this new type of coal gas combustion will make breakthrough in clean coal technology by simultaneously resolving energy and environment problems.

scholarly journals Efficiency Improvement of Chemical Looping Combustion Combined Cycle Power Plants

2019 ◽  
Vol 7 (11) ◽  
pp. 1900567 ◽  
Author(s):  
Mohammed N. Khan ◽  
Schalk Cloete ◽  
Shahriar Amini
Keyword(s):  
Power Plants ◽  
Combined Cycle ◽  
Chemical Looping Combustion ◽  
Chemical Looping ◽  
Efficiency Improvement

scholarly journals Development of Multimode Gas Fired Combined Cycle Chemical-Looping Combustion Based Power Plant Lay-Outs

2021 ◽  
Author(s):  
Basavaraja Revappa Jayadevappa
Keyword(s):  
Carbon Dioxide ◽  
Power Plant ◽  
Natural Gas ◽  
Flue Gas ◽  
Power Plants ◽  
Carbon Dioxide Capture ◽  
Combined Cycle ◽  
Chemical Looping Combustion ◽  
Chemical Looping ◽  
Operating Pressure

Abstract Operation of power plants in carbon dioxide capture and non-capture modes and energy penalty or energy utilization in such operations are of great significance. This work reports on two gas fired pressurized chemical-looping combustion power plant lay-outs with two inbuilt modes of flue gas exit namely, with carbon dioxide capture mode and second mode is letting flue gas (consists carbon dioxide and water) without capturing carbon dioxide. In the non-CCS mode, higher thermal efficiencies of 54.06% and 52.63% efficiencies are obtained with natural gas and syngas. In carbon capture mode, a net thermal efficiency of 52.13% is obtained with natural gas and 48.78% with syngas. The operating pressure of air reactor is taken to be 13 bar for realistic operational considerations and that of fuel reactor is 11.5 bar. Two power plant lay-outs developed based combined cycle CLC mode for natural gas and syngas fuels. A single lay-out is developed for two fuels with possible retrofit for dual fuel operation. The CLC Power plants can be operated with two modes of flue gas exit options and these operational options makes them higher thermal efficient power plants.

Energy and Exergy Analyses of a Power Plant With Carbon Dioxide Capture Using Multistage Chemical Looping Combustion

2016 ◽  
Vol 139 (3) ◽  
Author(s):  
Bilal Hassan ◽  
Oghare Victor Ogidiama ◽  
Mohammed N. Khan ◽  
Tariq Shamim
Keyword(s):  
Carbon Dioxide ◽  
Power Plant ◽  
Natural Gas ◽  
Co2 Capture ◽  
Power Plants ◽  
Waste Heat ◽  
Chemical Looping Combustion ◽  
Chemical Looping ◽  
Operating Pressure ◽  
Efficiency Gain

A thermodynamic model and parametric analysis of a natural gas-fired power plant with carbon dioxide (CO2) capture using multistage chemical looping combustion (CLC) are presented. CLC is an innovative concept and an attractive option to capture CO2 with a significantly lower energy penalty than other carbon-capture technologies. The principal idea behind CLC is to split the combustion process into two separate steps (redox reactions) carried out in two separate reactors: an oxidation reaction and a reduction reaction, by introducing a suitable metal oxide which acts as an oxygen carrier (OC) that circulates between the two reactors. In this study, an Aspen Plus model was developed by employing the conservation of mass and energy for all components of the CLC system. In the analysis, equilibrium-based thermodynamic reactions with no OC deactivation were considered. The model was employed to investigate the effect of various key operating parameters such as air, fuel, and OC mass flow rates, operating pressure, and waste heat recovery on the performance of a natural gas-fired power plant with multistage CLC. The results of these parameters on the plant's thermal and exergetic efficiencies are presented. Based on the lower heating value, the analysis shows a thermal efficiency gain of more than 6 percentage points for CLC-integrated natural gas power plants compared to similar power plants with pre- or post-combustion CO2 capture technologies.

Sign in / Sign up

Export Citation Format

Share Document