scholarly journals An electronic textile embedded smart cementitious composite

2021 ◽  
Author(s):  
Muhammad S. Irfan ◽  
Muhammad A. Ali ◽  
Kamran A. Khan ◽  
Rehan Umer ◽  
Antonios Kanellopoulos ◽  
...  
Keyword(s):  
Cementitious Composite ◽  
Electronic Textile

Properties of Self-Compacting Cementitious Composite Materials Containing Cement Kiln Dust Powder

2020 ◽  
Vol 38 (6A) ◽  
pp. 879-886
Author(s):  
Ahmed S. Kadhim ◽  
Alaa A. Atiyah ◽  
Shakir A. Salih
Keyword(s):  
Composite Materials ◽  
Total Porosity ◽  
Cement Kiln Dust ◽  
Cement Kiln ◽  
Cementitious Composite ◽  
Cement Dust ◽  
Micro Cracks ◽  
Load Carrying ◽  
Sustainable Materials ◽  
Kiln Dust

This paper aims to investigate the influence of utilization micro cement kiln dust as a sustainable materials additive in order to reduce the voids and micro cracks in the cementitious mortar materials which cause a drastic reduction in the load carrying capacity of the element. Its therefore very important to decrease the pores and enhance the mechanical strength of the cementitious composite materials. In this article, the properties of self-compacting mortar containing micro cement dust additive was experimentally assessed. Micro cement dust powder was added to the self-compacting mortar in (1, 2, 3, 4 and 5 %) percentage by weight of cement to be used as cementitious sustainable materials. The experimental results indicated that the modification and enhancement of the workability of fresh mixture and the mechanical strengths of self-compacting mortar were increased as micro cement dust additives increases. Also; the water absorption and total porosity were decreased with increases of micro cement dust powder.

Electrochemical deposition induced continuum damage-healing framework for the cementitious composite

2021 ◽  
pp. 105678952199187
Author(s):  
Hehua Zhu ◽  
Qing Chen ◽  
J Woody Ju ◽  
Zhiguo Yan ◽  
Zhengwu Jiang
Keyword(s):  
Electrochemical Deposition ◽  
Planck Equation ◽  
Healing Time ◽  
Aqueous Environment ◽  
Continuum Damage ◽  
Deposition Method ◽  
Cementitious Composite ◽  
Current Conservation ◽  
Electrochemical Deposition Method ◽  
Damage Healing

The electrochemical deposition method is a promising approach to repair the deteriorated concrete in the aqueous environment. In this paper, a continuum damage-healing framework is presented for the electrochemical deposition method based on the multi-field coupling growth process of the electrochemical deposition products. The ion transportation and the electrode reactions are characterized by employing the Nernst-Planck equation and the current conservation equation. The level set method is adopted to capture the growth of the deposition products. Based on the deposition process, a new empirical healing law is presented, with which a new continuum damage-healing framework is presented for electrochemical deposition method. Numerical examples are conducted by applying the presented framework to the damaged cementitious composite under the tensile loadings. The presented framework is compared with the classic continuum damage-healing theory and the experimental data. The results show that the presented models can describe the electrochemical deposition method induced damage-healing for the cementitious composite. Furthermore, the effects of the healing time, the solution concentration and the external voltage on the damage-healing behaviors are investigated based on our proposed framework.

scholarly journals Design framework for a seamless smart glove using a digital knitting system

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Yewon Song ◽  
Seulah Lee ◽  
Yuna Choi ◽  
Sora Han ◽  
Hyuna Won ◽  
...  
Keyword(s):  
Systematic Approach ◽  
Performance Criteria ◽  
Wearable Electronics ◽  
Design Development ◽  
Performance Requirements ◽  
Development Framework ◽  
Promising Strategy ◽  
Cad Cam ◽  
Wearable Electronic ◽  
Electronic Textile

AbstractThe wearable electronics integrated with textile-based devices is a promising strategy to meet the requirements of human comfort as well as electrical performances. This research presents a design and development framework for a seamless glove sensor system using digital knitting fabrication. Based on the performance requirements of glove sensors for controlling a prosthetic hand, desirable design components include electrical conductivity, comfort, formfit, electrical sensitivity, and customizable design. These attributes are determined and achieved by applying appropriate materials and fabrication technologies. In this study, a digital knitting CAD/CAM system is utilized to meet the desired performance criteria, and two prototypes of the seamless glove sensor systems are successfully developed for the detection of both human and robotic finger motions. This digital knitting system will provide considerable potential for customized design development as well as a sustainable production process. This structured, systematic approach could be adapted in the future development of wearable electronic textile systems.

scholarly journals Insight into the Mechanical Performance of the UHPC Repaired Cementitious Composite System after Exposure to High Temperatures

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4095
Author(s):  
Qing Chen ◽  
Zhiyuan Zhu ◽  
Rui Ma ◽  
Zhengwu Jiang ◽  
Yao Zhang ◽  
...  
Keyword(s):  
Compressive Strength ◽  
High Temperature ◽  
High Temperatures ◽  
Bonding Strength ◽  
Composite System ◽  
Mechanical Performance ◽  
High Performance Concrete ◽  
Interfacial Structure ◽  
Cementitious Composite ◽  
Average Percentage

In this paper, the mechanical performance of an ultra-high-performance concrete (UHPC) repaired cementitious composite system, including the old matrix and the new reinforcement (UHPC), under various high temperature levels (20 °C, 100 °C, 300 °C, and 500 °C) was studied. In this system, UHPC reinforced with different contents of steel fibers and polypropylene (PP) fibers was utilized. Moreover, the physical, compressive, bonding, and flexural behaviors of the UHPC repaired system after being exposed to different high temperatures were investigated. Meanwhile, X-ray diffraction (XRD), baseline evaluation test (BET), and scanning electron microscope (SEM) tests were conducted to analyze the effect of high temperature on the microstructural changes in a UHPC repaired cementitious composite system. Results indicate that the appearance of the bonded system changed, and its mass decreased slightly. The average percentage of residual mass of the system was 99.5%, 96%, and 94–95% at 100 °C, 300 °C, and 500 °C, respectively. The residual compressive strength, bonding strength, and flexural performance improved first and then deteriorated with the increase of temperature. When the temperature reached 500 °C, the compressive strength, bonding strength, and flexural strength decreased by about 20%, 30%, and 15% for the UHPC bonded system, respectively. Under high temperature, the original components of UHPC decreased and the pore structure deteriorated. The cumulative pore volume at 500 °C could reach more than three times that at room temperature (about 20 °C). The bonding showed obvious deterioration, and the interfacial structure became looser after exposure to high temperature.

scholarly journals Modeling of Bridging Law for Bundled Aramid Fiber-Reinforced Cementitious Composite and its Adaptability in Crack Width Evaluation

Materials ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 179
Author(s):  
Daiki Sunaga ◽  
Takumi Koba ◽  
Toshiyuki Kanakubo
Keyword(s):  
Fiber Orientation ◽  
Crack Width ◽  
Volume Fraction ◽  
Characteristic Point ◽  
Crack Opening ◽  
Aramid Fiber ◽  
Cementitious Composite ◽  
Fiber Reinforced ◽  
Cross Sectional ◽  
Bridging Law

Tensile performance of fiber-reinforced cementitious composite (FRCC) after first cracking is characterized by fiber-bridging stress–crack width relationships called bridging law. The bridging law can be calculated by an integral calculus of forces carried by individual fibers, considering the fiber orientation. The objective of this study was to propose a simplified model of bridging law for bundled aramid fiber, considering fiber orientation for the practical use. By using the pullout characteristic of bundled aramid fiber obtained in the previous study, the bridging laws were calculated for various cases of fiber orientation. The calculated results were expressed by a bilinear model, and each characteristic point is expressed by the function of fiber-orientation intensity. After that, uniaxial tension tests of steel reinforced aramid-FRCC prism specimens were conducted to obtain the crack-opening behavior and confirm the adaptability of the modeled bridging laws in crack-width evaluation. The experimental parameters are cross-sectional dimensions of specimens and volume fraction of fiber. The test results are compared with the theoretical curves calculated by using the modeled bridging law and show good agreements in each parameter.

scholarly journals Future Trend in Wearable Electronics in the Textile Industry

2021 ◽  
Vol 11 (9) ◽  
pp. 3914
Author(s):  
Chi-Wai Kan ◽  
Yin-Ling Lam
Keyword(s):  
Human Brain ◽  
Textile Industry ◽  
Wearable Technology ◽  
User Acceptance ◽  
Future Trend ◽  
Wearable Electronics ◽  
External Conditions ◽  
Electronic Textile ◽  
User Friendly ◽  
Smart Wearable

Smart wearable textiles can sense, react, and adapt themselves to external conditions or stimuli, and they can be divided into active and passive smart wearable textiles, which can work with the human brain for cognition, reasoning, and activating capacity. Wearable technology is among the fastest growing parts of health, entertainment, and education. In the future, the development of wearable electronics will be focused on multifunctional, user-friendly, and user acceptance and comfort features and shall be based on advanced electronic textile systems.

scholarly journals The Effect of Superabsorbent Polymers on the Microstructure and Self-Healing Properties of Cementitious-Based Composite Materials

2021 ◽  
Vol 11 (2) ◽  
pp. 700
Author(s):  
Irene A. Kanellopoulou ◽  
Ioannis A. Kartsonakis ◽  
Costas A. Charitidis
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Hybrid Structure ◽  
The Self ◽  
Self Healing ◽  
Cementitious Composite ◽  
Superabsorbent Polymers ◽  
Porosity Reduction ◽  
Environment Control ◽  
The Impact

Cementitious structures have prevailed worldwide and are expected to exhibit further growth in the future. Nevertheless, cement cracking is an issue that needs to be addressed in order to enhance structure durability and sustainability especially when exposed to aggressive environments. The purpose of this work was to examine the impact of the Superabsorbent Polymers (SAPs) incorporation into cementitious composite materials (mortars) with respect to their structure (hybrid structure consisting of organic core—inorganic shell) and evaluate the microstructure and self-healing properties of the obtained mortars. The applied SAPs were tailored to maintain their functionality in the cementitious environment. Control and mortar/SAPs specimens with two different SAPs concentrations (1 and 2% bwoc) were molded and their mechanical properties were determined according to EN 196-1, while their microstructure and self-healing behavior were evaluated via microCT. Compressive strength, a key property for mortars, which often degrades with SAPs incorporation, in this work, practically remained intact for all specimens. This is coherent with the porosity reduction and the narrower range of pore size distribution for the mortar/SAPs specimens as determined via microCT. Moreover, the self-healing behavior of mortar-SAPs specimens was enhanced up to 60% compared to control specimens. Conclusively, the overall SAPs functionality in cementitious-based materials was optimized.

Sign in / Sign up

Export Citation Format

Share Document