Electrophoretic transport and dynamic deformation of bio‐vesicles

Abstract The paper presents the results of the analysis of the striker shape impact on the shape of the mechanical elastic wave generated in the Hopkinson bar. The influence of the tensometer amplifier bandwidth on the stress-strain characteristics obtained in this method was analyzed too. For the purposes of analyzing under the computing environment ABAQUS / Explicit the test bench model was created, and then the analysis of the process of dynamic deformation of the specimen with specific mechanical parameters was carried out. Based on those tests, it was found that the geometry of the end of the striker has an effect on the form of the loading wave and the spectral width of the signal of that wave. Reduction of the striker end diameter reduces unwanted oscillations, however, adversely affects the time of strain rate stabilization. It was determined for the assumed test bench configuration that a tensometric measurement system with a bandwidth equal to 50 kHz is sufficient

Download Full-text

Effects of dynamic deformation and fracture in the Klein – Gordon stress field

Procedia Structural Integrity ◽

10.1016/j.prostr.2020.10.100 ◽

2020 ◽

Vol 28 ◽

pp. 1303-1309

Author(s):

Liudmila Igusheva ◽

Yuri Petrov

Keyword(s):

Stress Field ◽

Dynamic Deformation ◽

Deformation And Fracture ◽

Klein Gordon

Download Full-text

Influence of the Welded Joint on the Mechanical Behavior of Steel Piles during Static and Dynamic Deformation

Key Engineering Materials ◽

10.4028/www.scientific.net/kem.345-346.1469 ◽

2007 ◽

Vol 345-346 ◽

pp. 1469-1472

Author(s):

Gab Chul Jang ◽

Kyong Ho Chang ◽

Chin Hyung Lee

Keyword(s):

Residual Stress ◽

Stress Distribution ◽

Mechanical Behavior ◽

Welded Joint ◽

Dynamic Deformation ◽

Three Dimensional ◽

Steel Structures ◽

Residual Stress Distribution ◽

Dynamic Mechanical Behavior ◽

Steel Piles

During manufacturing the welded joint of steel structures, residual stress is produced and weld metal is used inevitably. And residual stress and weld metal influence on the static and dynamic mechanical behavior of steel structures. Therefore, to predict the mechanical behavior of steel pile with a welded joint during static and dynamic deformation, the research on the influence of the welded joints on the static and dynamic behavior of steel pile is clarified. In this paper, the residual stress distribution in a welded joint of steel piles was investigated by using three-dimensional welding analysis. The static and dynamic mechanical behavior of steel piles with a welded joint is investigated by three-dimensional elastic-plastic finite element analysis using a proposed dynamic hysteresis model. Numerical analyses of the steel pile with a welded joint were compared to that without a welded joint with respect to load carrying capacity and residual stress distribution. The influence of the welded joint on the mechanical behavior of steel piles during static and dynamic deformation was clarified by comparing analytical results

Download Full-text

A neural network-based algorithm for high-throughput characterisation of viscoelastic properties of flowing microcapsules

Soft Matter ◽

10.1039/d0sm02121k ◽

2021 ◽

Author(s):

Tao Lin ◽

Zhen Wang ◽

Wen Wang ◽

Yi Sui

Keyword(s):

Neural Network ◽

High Throughput ◽

Viscoelastic Properties ◽

Dynamic Deformation ◽

Membrane Elasticity ◽

Hybrid Neural Network ◽

High Throughput Method

We have developed a high-throughput method, by combining a hybrid neural network with a mechanistic capsule model, to predict membrane elasticity and viscosity of microcapsules from their dynamic deformation in a branched microchannel.

Download Full-text

Aqueous phenol and ethylene glycol solutions in electrohydrodynamic liquid bridging

Open Chemistry ◽

10.2478/s11532-011-0029-3 ◽

2011 ◽

Vol 9 (3) ◽

pp. 391-403 ◽

Cited By ~ 11

Author(s):

Mathias Eisenhut ◽

Xinghua Guo ◽

Astrid Paulitsch-Fuchs ◽

Elmar Fuchs

Keyword(s):

Mass Transport ◽

Ethylene Glycol ◽

Bisphenol A ◽

Anodic Oxidation ◽

High Voltage ◽

Electrochemical Behavior ◽

Pure Water ◽

Passivation Layer ◽

Mass Transfers ◽

Electrophoretic Transport

AbstractThe formation of aqueous bridges containing phenol and ethylene glycol as well as bisphenol-A, hydrochinone and p-cresol under the application of high voltage DC (“liquid bridges”) is reported. Detailed studies were made for phenol and glycol with concentrations from 0.005 to 0.531 mol L−1. Conductivity as well as substance and mass transfers through these aqueous bridges are discussed and compared with pure water bridges. Previously suggested bidirectional mass transport is confirmed for the substances tested. Anodic oxidation happens more efficiently when phenol or glycol are transported from the cathode to the anode since in this case the formation of a passivation layer or electrode poisoning are retarded by the electrohydrodynamic (EHD) flow. The conductivity in the cathode beaker decreases in all experiments due to electrophoretic transport of naturally dissolved carbonate and bicarbonate to the anode. The observed electrochemical behavior is shortly discussed and compared to known mechanisms.

Download Full-text

Geomorphology of the Burnt River, eastern Oregon, USA: Topographic adjustments to tectonic and dynamic deformation

Geomorphology ◽

10.1016/j.geomorph.2016.09.015 ◽

2017 ◽

Vol 278 ◽

pp. 43-59 ◽

Cited By ~ 5

Author(s):

Matthew Connor Morriss ◽

Karl W. Wegmann

Keyword(s):

Dynamic Deformation

Download Full-text

Study on Mechanical Properties of the Composite Materials Film by Speckle Projection Method

Advanced Materials Research ◽

10.4028/www.scientific.net/amr.496.281 ◽

2012 ◽

Vol 496 ◽

pp. 281-284

Author(s):

Wen Wen Liu ◽

Zhi Wang ◽

Yun Hai Du ◽

Xian Zhong Xu ◽

Da Quan Liu ◽

...

Keyword(s):

Mechanical Properties ◽

Composite Material ◽

Composite Materials ◽

Projection Method ◽

Dynamic Deformation ◽

Calibration Method ◽

Deformation Measurement ◽

Lens Distortion

An improved accurate speckle projection method is used for study the mechanical properties of the composite material film in the paper. A system for deformation measurement is developed with the telecentric lenses, in which such conventional lens’ disadvantages such as lens distortion and perspective error will be diminished. Experiments are performed to validate the availability and reliability of the calibration method. The system can also be used to measure the dynamic deformation and then results are also given.

Download Full-text