Evaluating the effect of reference genome divergence on the analysis of empirical RADseq datasets

Mapping short reads to a reference genome is an essential step in many next-generation sequencing (NGS) analyses. In plants with large genomes, a large fraction of the reads can align to multiple locations of the genome with equally good alignment scores. How to map these ambiguous reads to the genome is a challenging problem with big impacts on the downstream analysis. Traditionally, the default method is to assign an ambiguous read randomly to one of the many potential locations. In this study, we explore two alternative methods that are based on the hypothesis that the possibility of an ambiguous read being generated by a location is proportional to the total number of reads produced by that location: (1) the enrichment method that assigns an ambiguous read to the location that has produced the most reads among all the potential locations, (2) the probability method that assigns an ambiguous read to a location based on a probability proportional to the number of reads the location produces. We systematically compared the performance of the proposed methods with that of the default random method. Our results showed that the enrichment method produced better results than the default random method and the probability method in the discovery of single nucleotide polymorphisms (SNPs). Not only did it produce more SNP markers, but it also produced SNP markers with better quality, which was demonstrated using multiple mainstay genomic analyses, including genome-wide association studies (GWAS), minor allele distribution, population structure, and genomic prediction.

Download Full-text

Systematic benchmark of ancient DNA read mapping

Briefings in Bioinformatics ◽

10.1093/bib/bbab076 ◽

2021 ◽

Author(s):

Adrien Oliva ◽

Raymond Tobler ◽

Alan Cooper ◽

Bastien Llamas ◽

Yassine Souilmi

Keyword(s):

Ancient Dna ◽

Dna Sequences ◽

Population Genetic ◽

Reference Genome ◽

Population Data ◽

Human Populations ◽

Current Standard ◽

Read Mapping ◽

Reference Bias ◽

The Impact

Abstract The current standard practice for assembling individual genomes involves mapping millions of short DNA sequences (also known as DNA ‘reads’) against a pre-constructed reference genome. Mapping vast amounts of short reads in a timely manner is a computationally challenging task that inevitably produces artefacts, including biases against alleles not found in the reference genome. This reference bias and other mapping artefacts are expected to be exacerbated in ancient DNA (aDNA) studies, which rely on the analysis of low quantities of damaged and very short DNA fragments (~30–80 bp). Nevertheless, the current gold-standard mapping strategies for aDNA studies have effectively remained unchanged for nearly a decade, during which time new software has emerged. In this study, we used simulated aDNA reads from three different human populations to benchmark the performance of 30 distinct mapping strategies implemented across four different read mapping software—BWA-aln, BWA-mem, NovoAlign and Bowtie2—and quantified the impact of reference bias in downstream population genetic analyses. We show that specific NovoAlign, BWA-aln and BWA-mem parameterizations achieve high mapping precision with low levels of reference bias, particularly after filtering out reads with low mapping qualities. However, unbiased NovoAlign results required the use of an IUPAC reference genome. While relevant only to aDNA projects where reference population data are available, the benefit of using an IUPAC reference demonstrates the value of incorporating population genetic information into the aDNA mapping process, echoing recent results based on graph genome representations.

Download Full-text

Whole-Genome Sequencing and Characterization of Buffalo Genetic Resources: Recent Advances and Future Challenges

Animals ◽

10.3390/ani11030904 ◽

2021 ◽

Vol 11 (3) ◽

pp. 904

Author(s):

Saif ur Rehman ◽

Faiz-ul Hassan ◽

Xier Luo ◽

Zhipeng Li ◽

Qingyou Liu

Keyword(s):

Selective Breeding ◽

Reference Genome ◽

De Novo ◽

Phenotypic Diversity ◽

Molecular Data ◽

Genomic Diversity ◽

Production Performance ◽

Phylogeographic Structure ◽

Economic Significance ◽

And Performance

The buffalo was domesticated around 3000–6000 years ago and has substantial economic significance as a meat, dairy, and draught animal. The buffalo has remained underutilized in terms of the development of a well-annotated and assembled reference genome de novo. It is mandatory to explore the genetic architecture of a species to understand the biology that helps to manage its genetic variability, which is ultimately used for selective breeding and genomic selection. Morphological and molecular data have revealed that the swamp buffalo population has strong geographical genomic diversity with low gene flow but strong phenotypic consistency, while the river buffalo population has higher phenotypic diversity with a weak phylogeographic structure. The availability of recent high-quality reference genome and genotyping marker panels has invigorated many genome-based studies on evolutionary history, genetic diversity, functional elements, and performance traits. The increasing molecular knowledge syndicate with selective breeding should pave the way for genetic improvement in the climatic resilience, disease resistance, and production performance of water buffalo populations globally.

Download Full-text

Functional alterations caused by mutations reflect evolutionary trends of SARS-CoV-2

Briefings in Bioinformatics ◽

10.1093/bib/bbab042 ◽

2021 ◽

Author(s):

Liang Cheng ◽

Xudong Han ◽

Zijun Zhu ◽

Changlu Qi ◽

Ping Wang ◽

...

Keyword(s):

Reference Genome ◽

Sequence Data ◽

Purifying Selection ◽

Virus Genome ◽

Receptor Binding Domain ◽

Evolutionary Trends ◽

Synonymous Mutations ◽

Almost All ◽

Virus Strains ◽

New Mutations

Abstract Since the first report of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in December 2019, the COVID-19 pandemic has spread rapidly worldwide. Due to the limited virus strains, few key mutations that would be very important with the evolutionary trends of virus genome were observed in early studies. Here, we downloaded 1809 sequence data of SARS-CoV-2 strains from GISAID before April 2020 to identify mutations and functional alterations caused by these mutations. Totally, we identified 1017 nonsynonymous and 512 synonymous mutations with alignment to reference genome NC_045512, none of which were observed in the receptor-binding domain (RBD) of the spike protein. On average, each of the strains could have about 1.75 new mutations each month. The current mutations may have few impacts on antibodies. Although it shows the purifying selection in whole-genome, ORF3a, ORF8 and ORF10 were under positive selection. Only 36 mutations occurred in 1% and more virus strains were further analyzed to reveal linkage disequilibrium (LD) variants and dominant mutations. As a result, we observed five dominant mutations involving three nonsynonymous mutations C28144T, C14408T and A23403G and two synonymous mutations T8782C, and C3037T. These five mutations occurred in almost all strains in April 2020. Besides, we also observed two potential dominant nonsynonymous mutations C1059T and G25563T, which occurred in most of the strains in April 2020. Further functional analysis shows that these mutations decreased protein stability largely, which could lead to a significant reduction of virus virulence. In addition, the A23403G mutation increases the spike-ACE2 interaction and finally leads to the enhancement of its infectivity. All of these proved that the evolution of SARS-CoV-2 is toward the enhancement of infectivity and reduction of virulence.

Download Full-text

Genome Assembly of the Canadian Two-row Malting Barley Cultivar AAC Synergy

G3 Genes|Genome|Genetics ◽

10.1093/g3journal/jkab031 ◽

2021 ◽

Author(s):

Wayne Xu ◽

James R Tucker ◽

Wubishet A Bekele ◽

Frank M You ◽

Yong-Bi Fu ◽

...

Keyword(s):

Reference Genome ◽

Single Copy ◽

Barley Cultivar ◽

Malting Barley ◽

Orthologous Genes ◽

Hordeum Vulgare L ◽

Chromosome Conformation ◽

Mate Pair ◽

Genome Assemblies ◽

First Time

Abstract Barley (Hordeum vulgare L.) is one of the most important global crops. The six-row barley cultivar Morex reference genome has been used by the barley research community worldwide. However, this reference genome can have limitations when used for genomic and genetic diversity analysis studies, gene discovery, and marker development when working in two-row germplasm that is more common to Canadian barley. Here we assembled, for the first time, the genome sequence of a Canadian two-row malting barley, cultivar AAC Synergy. We applied deep Illumina paired-end reads, long mate-pair reads, PacBio sequences, 10X chromium linked read libraries, and chromosome conformation capture sequencing (Hi-C) to generate a contiguous assembly. The genome assembled from super-scaffolds had a size of 4.85 Gb, N50 of 2.32 Mb and an estimated 93.9% of complete genes from a plant database (BUSCO, benchmarking universal single-copy orthologous genes). After removal of small scaffolds (< 300 Kb), the assembly was arranged into pseudomolecules of 4.14 Gb in size with seven chromosomes plus unanchored scaffolds. The completeness and annotation of the assembly were assessed by comparing it with the updated version of six-row Morex and recently released two-row Golden Promise genome assemblies.

Download Full-text

In Search of Species-Specific SNPs in a Non-Model Animal (European Bison (Bison bonasus))—Comparison of De Novo and Reference-Based Integrated Pipeline of STACKS Using Genotyping-by-Sequencing (GBS) Data

Animals ◽

10.3390/ani11082226 ◽

2021 ◽

Vol 11 (8) ◽

pp. 2226

Author(s):

Sazia Kunvar ◽

Sylwia Czarnomska ◽

Cino Pertoldi ◽

Małgorzata Tokarska

Keyword(s):

Reference Genome ◽

De Novo ◽

Bos Taurus ◽

Model Organism ◽

Genotyping By Sequencing ◽

Model Organisms ◽

European Bison ◽

Model Animal ◽

Pcr Duplicates ◽

Species Specific

The European bison is a non-model organism; thus, most of its genetic and genomic analyses have been performed using cattle-specific resources, such as BovineSNP50 BeadChip or Illumina Bovine 800 K HD Bead Chip. The problem with non-specific tools is the potential loss of evolutionary diversified information (ascertainment bias) and species-specific markers. Here, we have used a genotyping-by-sequencing (GBS) approach for genotyping 256 samples from the European bison population in Bialowieza Forest (Poland) and performed an analysis using two integrated pipelines of the STACKS software: one is de novo (without reference genome) and the other is a reference pipeline (with reference genome). Moreover, we used a reference pipeline with two different genomes, i.e., Bos taurus and European bison. Genotyping by sequencing (GBS) is a useful tool for SNP genotyping in non-model organisms due to its cost effectiveness. Our results support GBS with a reference pipeline without PCR duplicates as a powerful approach for studying the population structure and genotyping data of non-model organisms. We found more polymorphic markers in the reference pipeline in comparison to the de novo pipeline. The decreased number of SNPs from the de novo pipeline could be due to the extremely low level of heterozygosity in European bison. It has been confirmed that all the de novo/Bos taurus and Bos taurus reference pipeline obtained SNPs were unique and not included in 800 K BovineHD BeadChip.

Download Full-text

Reference flow: reducing reference bias using multiple population genomes

Genome Biology ◽

10.1186/s13059-020-02229-3 ◽

2021 ◽

Vol 22 (1) ◽

Author(s):

Nae-Chyun Chen ◽

Brad Solomon ◽

Taher Mun ◽

Sheila Iyer ◽

Ben Langmead

Keyword(s):

Genetic Variation ◽

Reference Genome ◽

Alignment Method ◽

Sequencing Data ◽

Computational Overhead ◽

Reference Flow ◽

Multiple Population ◽

Reference Bias ◽

Flow Alignment ◽

Reference Genomes

AbstractMost sequencing data analyses start by aligning sequencing reads to a linear reference genome, but failure to account for genetic variation leads to reference bias and confounding of results downstream. Other approaches replace the linear reference with structures like graphs that can include genetic variation, incurring major computational overhead. We propose the reference flow alignment method that uses multiple population reference genomes to improve alignment accuracy and reduce reference bias. Compared to the graph aligner vg, reference flow achieves a similar level of accuracy and bias avoidance but with 14% of the memory footprint and 5.5 times the speed.

Download Full-text

Exploiting the reference genome sequence of hexaploid wheat: a proteomic study of flour proteins from the cultivar Chinese Spring

Functional & Integrative Genomics ◽

10.1007/s10142-019-00694-z ◽

2019 ◽

Vol 20 (1) ◽

pp. 1-16 ◽

Cited By ~ 7

Author(s):

Susan B. Altenbach ◽

Han-Chang Chang ◽

Annamaria Simon-Buss ◽

Toni Mohr ◽

Naxin Huo ◽

...

Keyword(s):

Genome Sequence ◽

Hexaploid Wheat ◽

Chinese Spring ◽

Reference Genome ◽

Reference Genome Sequence ◽

Proteomic Study

Download Full-text