Multiband triple folding monopole antenna for wireless applications in the laptop computers

2021 ◽  
Author(s):  
Jayshri Kulkarni
Keyword(s):  
Monopole Antenna ◽  
Laptop Computers ◽  
Wireless Applications

Compact Triple/Quadruple-Band Reconfigurable Monopole Antenna for Wireless Applications

2021 ◽  
pp. 2150277
Author(s):  
Asmaa Zugari ◽  
Wael Abd Ellatif Ali ◽  
Mohammad Ahmad Salamin ◽  
El Mokhtar Hamham
Keyword(s):  
Simple Structure ◽  
Low Cost ◽  
Ground Plane ◽  
Monopole Antenna ◽  
Pin Diode ◽  
Wireless Applications ◽  
Rectangular Patch ◽  
Antenna Performance ◽  
Compact Size ◽  
Multi Band

In this paper, a compact reconfigurable tri-band/quad-band monopole antenna is presented. To achieve the multi-band behavior, two right-angled triangles were etched in a conventional rectangular patch, and a partial ground plane is used. Moreover, the proposed multi-band antenna is printed on a low cost FR4 epoxy with compact dimensions of 0.23[Formula: see text], where [Formula: see text] is calculated at the lowest resonance frequency. To provide frequency agility, a metal strip which acts as PIN diode was embedded in the frame of the modified patch. The tri-band/quad-band antenna performance in terms of reflection coefficient, radiation patterns, peak gain and efficiency was studied. The measured results are consistent with the simulated results for both cases. The simple structure and the compact size of the proposed antenna could make it a good candidate for multi-band wireless applications.

Design of a novel triple-band monopole antenna for WLAN/WiMAX MIMO applications in the laptop computer

Circuit World ◽  
2019 ◽  
Vol 45 (4) ◽  
pp. 257-267 ◽  
Author(s):  
Jayshri Sharad Kulkarni ◽  
Raju Seenivasan
Keyword(s):  
Antenna Array ◽  
Cost Effective ◽  
Monopole Antenna ◽  
Antenna Design ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Laptop Computer ◽  
Content Type ◽  
Laptop Computers ◽  
Triple Band

Purpose This paper aims to present a triple-band monopole antenna design of 0.2-mm thickness with an overall dimension of 21 × 8 mm2 for wireless local area network (WLAN)/worldwide interoperability for microwave access (WiMAX) multiple input and multiple output (MIMO) applications in the laptop computer. Design/methodology/approach It comprises three monopole radiating elements, namely, strip AD (inverted C), strip EG (inverted J) and strip FI (inverted U) along with two rectangular open-end tuning stubs, namely, “m” and “n” of size 1.5 × 0.9 mm2 and 1.8 × 0.9 mm2, respectively. The proposed structure is compact, cost-effective and easy to integrate inside the laptop computers. Findings This structure excites three WLAN (2.4/5.2/5.8 GHz) and three WiMAX (2.3/3.3/5.5 GHz) bands. The proposed antenna array elucidates that it has measured −10dB impedance bandwidth of 11.86 per cent (2.22-2.50) GHz in a lower band (f_l), 6.83 per cent (3.25-3.48) GHz in medium band (f_m) and 16.84 per cent (5.00-5.92) GHz in upper band (f_u). The measured gain and radiation efficiency are above 3.64dBi and 75 per cent, respectively, and isolation better than −20dB. The envelope correlation coefficient (ECC) is less than 0.004. The simulated and measured results are in good concurrence, which confirms the applicability of the proposed antenna array for MIMO applications in the laptop computer. Originality/value The proposed antenna is designed without using vias, reactive elements and matching circuits for excitation of WLAN/WiMAX bands in the laptop computers. The design also does not require any additional ground for mounting the antenna. Further, the antenna array, formed by using the same antenna design, does not need additional isolating elements and is designed in such a way that the system ground itself acts as an isolating element. The proposed antenna has a low profile and is ultra-thin, cost-effective and easy to manufacture and can be easily embedded inside the next-generation laptop computers.

Sign in / Sign up

Export Citation Format

Share Document