Encapsulated Laccases for the Room-Temperature Oxidation of Aromatics: Towards Synthetic Low-Molecular-Weight Lignins

ChemSusChem ◽  
2016 ◽  
Vol 9 (7) ◽  
pp. 756-762 ◽  
Author(s):  
Lucia Pistone ◽  
Gianluca Ottolina ◽  
Sudipta De ◽  
Antonio A. Romero ◽  
Lígia O. Martins ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Room Temperature ◽  
Low Molecular Weight ◽  
Temperature Oxidation

scholarly journals Metal- and Oxidant-Free Photoinduced Aromatic Trifluoromethylation Performed in Aerated Gel Media: Determining the Effects on Yield and Selectivity

Molecules ◽  
2018 ◽  
Vol 24 (1) ◽  
pp. 29 ◽  
Author(s):  
Alex Abramov ◽  
Hendrik Vernickel ◽  
César Saldías ◽  
David Díaz Díaz
Keyword(s):  
Molecular Weight ◽  
Room Temperature ◽  
Homogeneous Solution ◽  
Product Distribution ◽  
Blocking Effect ◽  
Low Molecular Weight ◽  
Metal Free ◽  
Potential Benefits ◽  
Media Concentration ◽  
Reaction Media

In this work we have investigated the potential benefits of using supramolecular gel networks as reaction media to carry out air-sensitive metal-free light-induced trifluoromethylation of six-membered (hetero)arenes under aerobic conditions. This reaction was performed at room temperature (RT) using sodium triflinate (CF3SO2Na, Langlois’ reagent) as a source of radicals and diacetyl as electron donor. The effects of confinement in gel media, concentration of reactants, and type of light source on yield and product distribution were evaluated and compared to the results obtained in homogeneous solution. Four different low molecular weight (LMW) gelators were employed in this study. The results confirmed the blocking effect of the gel medium against reaction quenching by external oxygen, as well as a certain control on the kinetics and selectivity.

Effect of Various Curing Agents On the Chemical Stability of Epoxy Resins

CORROSION ◽  
1961 ◽  
Vol 17 (1) ◽  
pp. 11t-20t ◽  
Author(s):  
RONALD L. DeHOFF
Keyword(s):  
Molecular Weight ◽  
Chemical Stability ◽  
Epoxy Resins ◽  
Room Temperature ◽  
Low Molecular Weight ◽  
Curing Agent ◽  
Corrosion Prevention ◽  
Curing Agents ◽  
Outdoor Weathering ◽  
Better Than

Abstract The epoxy resins most widely used in corrosion prevention are liquids of low molecular weight which can be converted to hard, tough, chemically resistant polymers by the use of various curing agents. Unlike other thermosetting resins such as polyesters, the curing agents may produce chemical linkages in the final polymers that differ from those present in the uncured form. Hence, the properties of cured epoxy resins are likely dependent upon, and may even reflect the properties of the curing agent used. Some seven different epoxy resin systems were exposed to various chemical environments and evaluatd for changes in dimensional stability and flexural strengths over a six month period. From the data presented herein, only limited conclusions may be drawn. Heat cured systems fare better than room temperature cured systems in every case. Anhydride cured epoxy resins show greater resistance to outdoor weathering than amine cured systems. 5.4.5, 6.6.8

Room-temperature Sinterable Silver Nanoparticle Ink with Low-molecular-weight Poly(N-vinylpyrrolidone) Ligand

2013 ◽  
Vol 42 (3) ◽  
pp. 232-234 ◽  
Author(s):  
Mi Yeon Lee ◽  
Won Jin Lee ◽  
Arup Kumer Roy ◽  
Kang Seok Lee ◽  
Sung Young Park ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Silver Nanoparticle ◽  
Room Temperature ◽  
Low Molecular Weight ◽  
Nanoparticle Ink

Influence of low molecular weight tail of polypropylene resin on the pore structure by room-temperature stretching

2013 ◽  
Vol 53 (12) ◽  
pp. 2594-2602 ◽  
Author(s):  
Lei Caihong ◽  
Wu Shuqiu ◽  
Xu Ruijie ◽  
Peng Xinlong ◽  
Shi Wenqiang ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Pore Structure ◽  
Room Temperature ◽  
Low Molecular Weight

A Potential New RAFT - Click Reaction or a Cautionary Note on the Use of Diazomethane to Methylate RAFT-synthesized Polymers

2011 ◽  
Vol 64 (4) ◽  
pp. 433 ◽  
Author(s):  
Ming Chen ◽  
Graeme Moad ◽  
Ezio Rizzardo
Keyword(s):  
Molecular Weight ◽  
Methyl Methacrylate ◽  
Room Temperature ◽  
Click Reaction ◽  
Raft Polymerization ◽  
Dipolar Cycloaddition ◽  
Low Molecular Weight ◽  
Similar Reaction ◽  
Poly Methyl Methacrylate ◽  
End Groups

It has been found that diazomethane undergoes a facile 1,3‐dipolar cycloaddition with both dithiobenzoate RAFT agents and the dithiobenzoate end‐groups of polymers formed by RAFT polymerization. Thus, 2‐cyanoprop‐2‐yl dithiobenzoate on treatment with diazomethane at room temperature provided a mixture of stereoisomeric 1,3‐dithiolanes in near quantitative (>95%) yield. A low‐molecular‐weight RAFT‐synthesized poly(methyl methacrylate) with dithiobenzoate end‐groups underwent similar reaction as indicated by immediate decolourization and a quantitative doubling of molecular weight. Higher‐molecular‐weight poly(methyl methacrylate)s were also rapidly decolourized by diazomethane and provided a product with a bimodal molecular weight distribution. Under similar conditions, the trithiocarbonate group does not react with diazomethane.

scholarly journals Characterization of Chitosan Extracted from Fish Scales of the Colombian Endemic Species Prochilodus magdalenae as a Novel Source for Antibacterial Starch-Based Films

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2079
Author(s):  
Carlos Molina-Ramírez ◽  
Paulina Mazo ◽  
Robin Zuluaga ◽  
Piedad Gañán ◽  
Juan Álvarez-Caballero
Keyword(s):  
Molecular Weight ◽  
Antibacterial Activity ◽  
Room Temperature ◽  
Low Molecular Weight ◽  
Fish Scales ◽  
Molecular Weight Characteristic ◽  
Mild Conditions ◽  
And Staphylococcus Aureus ◽  
Positive Results

Scales of Prochilodus magdalenae, a Colombian endemic fish species, were used to obtain chitosan for application as an antibacterial agent integrated into starch-based films. Analysis of its composition during the demineralization and deproteinization process indicated that minerals and protein were both removed successfully. At this point, mild conditions for the deacetylation process were employed, namely, 2, 4, and 6 wt.% NaOH at room temperature for 16 h. Chitosan processed under 2 wt.% NaOH had low molecular weight, with the lowest value of 107.18 ± 24.99 kDa, which was closely related to its antibacterial activity. Finally, this chitosan was integrated into a banana starch-based film, and its antibacterial activity was assayed in Escherichia coli and Staphylococcus aureus cultures, with positive results in the former culture, especially due to the low-molecular-weight characteristic of chitosan.

scholarly journals Impedimetric Detection of Ammonia and Low Molecular Weight Amines in the Gas Phase with Covalent Organic Frameworks

Sensors ◽  
2020 ◽  
Vol 20 (5) ◽  
pp. 1385 ◽  
Author(s):  
Andrés Rodríguez ◽  
Elio Rico ◽  
Cesar Sierra ◽  
Oscar Rodríguez
Keyword(s):  
Molecular Weight ◽  
Room Temperature ◽  
Nitrogen Adsorption ◽  
Low Molecular Weight ◽  
Covalent Organic Frameworks ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir ◽  
Nitrogen Adsorption Isotherms ◽  
Significant Interference

Two Covalent Organic Frameworks (COF), named TFP-BZ and TFP-DMBZ, were synthesized using the imine condensation between 1,3,5-triformylphloroglucinol (TFP) with benzidine (BZ) or 3,3-dimethylbenzidine (DMBZ). These materials were deposited, such as films over interdigitated electrodes (IDE), by chemical bath deposition, giving rise to TFP-BZ-IDE and TFP-DMBZ-IDE systems. The synthesized COFs powders were characterized by Powder X-Ray Diffraction (PXRD), Fourier Transform Infrared spectroscopy (FT-IR), solid-state Nuclear Magnetic Resonance (ssNMR), nitrogen adsorption isotherms, Scanning Electron Microscopy (SEM), and Raman spectroscopy, while the films were characterized by SEM and Raman. Ammonia and low molecular weight amine sensing were developed with the COF film systems using the impedance electrochemical spectroscopy (EIS). Results showed that the systems TFP-BZ-IDE and TFP-DMBZ-IDE detect low molecular weight amines selectively by impedimetric analysis. Remarkably, with no significant interference by other atmospheric gas compounds such as nitrogen, carbon dioxide, and methane. Additionally, both COF films presented a range of sensitivity at low amine concentrations below two ppm at room temperature.

scholarly journals Rapid low molecular weight polyethylene glycol embedding protocol for immunocytochemistry.

1989 ◽  
Vol 37 (10) ◽  
pp. 1549-1552 ◽  
Author(s):  
J Mowery ◽  
J Chesner ◽  
S Spangenberger ◽  
D C Hixson
Keyword(s):  
Electron Microscopy ◽  
Molecular Weight ◽  
Polyethylene Glycol ◽  
Room Temperature ◽  
Low Molecular Weight ◽  
Fixed Tissue ◽  
Thin Sectioning ◽  
Membrane Antigens ◽  
Excellent Preservation ◽  
Peg 600

We describe an alternative polyethylene glycol (PEG) embedding procedure which utilizes PEG 200 for dehydration and PEG 600 for infiltration and embedding of perfusion-fixed rat liver. PEG 600 has a melting point of 22 degrees C, enabling infiltration of fixed tissue to be performed at room temperature. Sections (2 microM) cut in a cryostat at -20 degrees C and immobilized in agarose were readily labeled by immunoperoxidase protocols with monoclonal antibodies to hepatocyte membrane antigens. Subsequent examination by light microscopy or by electron microscopy after re-embedding in resin and ultra-thin sectioning showed excellent preservation of morphology, with minimal impairment of antigenicity.

Sign in / Sign up

Export Citation Format

Share Document