Advances in peroxide‐initiated graft modification of thermoplastic biopolyesters by reactive extrusion

2021 ◽  
Author(s):  
Praphulla Tiwary ◽  
Naqi Najafi ◽  
Marianna Kontopoulou
Keyword(s):  
Reactive Extrusion ◽  
Graft Modification

A Dynamic Model Accounting for Oscillating Behavior in Reactive Extrusion

2003 ◽  
Vol 18 (3) ◽  
pp. 277-284 ◽  
Author(s):  
L. P. B. M. Janssen ◽  
P. F. Rozendal ◽  
H. W. Hoogstraten ◽  
M. Cioffi
Keyword(s):  
Dynamic Model ◽  
Reactive Extrusion

Influence of trisilanol isooctyl POSS content on the structure, morphology and rheological properties of thermoplastic polyurethane (TPU)

2020 ◽  
Vol 40 (9) ◽  
pp. 727-735
Author(s):  
Rudinei Fiorio ◽  
Chaitanya Danda ◽  
João Maia
Keyword(s):  
Thermal Stability ◽  
Rheological Properties ◽  
Thermoplastic Polyurethane ◽  
Reactive Extrusion ◽  
Strain Rates ◽  
Force Microscopy ◽  
Atomic Force ◽  
Extensional Strain ◽  
Oligomeric Silsesquioxane ◽  
Thermal Stability Of

AbstractIn this study, thermoplastic polyurethanes (TPUs) containing trisilanol isooctyl polyhedral oligomeric silsesquioxane (POSS), a reactive nanofiller, were synthesized and characterized rheologically and morphologically, and the effects of POSS content on the melt thermal stability of the TPUs are investigated. Samples containing 0, 0.23, 0.57, 1.14, and 2.23% (w/w) POSS were synthesized by reactive extrusion and characterized by Fourier transform infrared spectroscopy (FTIR), oscillatory and extensional rheometry, atomic force microscopy (AFM), and small- and wide-angle X-ray scattering (SAXS and WAXS, respectively). The rheological properties of molten TPU are time-dependent and the melt thermal stability of the TPU is maximal at 1.14% of POSS. The addition of 0.23 and 0.57% POSS promotes strain-hardening at low extensional strain rates (0.01 and 0.10 s−1), not affecting the extensional characteristics at higher strain rates. The addition of increasing amounts of POSS leads to the formation of POSS-rich clusters well dispersed in the TPU matrix. SAXS and WAXS results show that the POSS domains are amorphous and that POSS does not modify the crystalline structure of TPU. Therefore, this work indicates that synthesizing TPU in the presence of trisilanol isooctyl POSS can increase the melt thermal stability of the polymer, facilitating its processing.

scholarly journals Improving Rheological and Mechanical Properties of Various Virgin and Recycled Polypropylenes by Blending with Long-Chain Branched Polypropylene

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1137
Author(s):  
Sascha Stanic ◽  
Thomas Koch ◽  
Klaus Schmid ◽  
Simone Knaus ◽  
Vasiliki-Maria Archodoulaki
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
Tensile Test ◽  
Reactive Extrusion ◽  
Original Material ◽  
Melt Flow Rate ◽  
Single Screw Extruder ◽  
Pp Blends ◽  
The Impact ◽  
Long Chain

Blends of two long-chain branched polypropylenes (LCB-PP) and five linear polypropylenes (L-PP) were prepared in a single screw extruder at 240 °C. The two LCB-PPs were self-created via reactive extrusion at 180 °C by using dimyristyl peroxydicarbonate (PODIC C126) and dilauroyl peroxide (LP) as peroxides. For blending two virgin and three recycled PPs like coffee caps, yoghurt cups and buckets with different melt flow rate (MFR) values were used. The influence of using blends was assessed by investigating the rheological (dynamic and extensional rheology) and mechanical properties (tensile test and impact tensile test). The dynamic rheology indicated that the molecular weight as well as the molecular weight distribution could be increased or broadened. Also the melt strength behavior could be improved by using the two peroxide modified LCB-PP blends on the basis of PODIC C126 or PEROXAN LP (dilauroyl peroxide). In addition, the mechanical properties were consistently enhanced or at least kept constant compared to the original material. In particular, the impact tensile strength but also the elongation at break could be increased considerably. This study showed that the blending of LCB-PP can increase the investigated properties and represents a promising option, especially when using recycled PP, which demonstrates a real “up-cycling” process.

scholarly journals Synthesis of an Addition-Crosslinkable, Silicon-Modified Polyolefin via Reactive Extrusion Monitored by In-Line Raman Spectroscopy

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1246
Author(s):  
Steffen Ulitzsch ◽  
Tim Bäuerle ◽  
Mona Stefanakis ◽  
Marc Brecht ◽  
Thomas Chassé ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
High Performance ◽  
Process Analytical Technology ◽  
Statistical Design ◽  
Reactive Extrusion ◽  
Statistical Design Of Experiments ◽  
Grafting Efficiency ◽  
Grafting Reaction ◽  
Central Composite Experimental Design ◽  
Process Factors

We present the modification of ethylene-propylene rubber (EPM) with vinyltetra-methydisiloxane (VTMDS) via reactive extrusion to create a new silicone-based material with the potential for high-performance applications in the automotive, industrial and biomedical sectors. The radical-initiated modification is achieved with a peroxide catalyst starting the grafting reaction. The preparation process of the VTMDS-grafted EPM was systematically investigated using process analytical technology (in-line Raman spectroscopy) and the statistical design of experiments (DoE). By applying an orthogonal factorial array based on a face-centered central composite experimental design, the identification, quantification and mathematical modeling of the effects of the process factors on the grafting result were undertaken. Based on response surface models, process windows were defined that yield high grafting degrees and good grafting efficiency in terms of grafting agent utilization. To control the grafting process in terms of grafting degree and grafting efficiency, the chemical changes taking place during the modification procedure in the extruder were observed in real-time using a spectroscopic in-line Raman probe which was directly inserted into the extruder. Successful grafting of the EPM was validated in the final product by 1H-NMR and FTIR spectroscopy.

Fast, low-energy additive manufacturing of isotropic parts via reactive extrusion

2021 ◽  
Vol 41 ◽  
pp. 101919
Author(s):  
Oliver Uitz ◽  
Pratik Koirala ◽  
Mehran Tehrani ◽  
Carolyn Conner Seepersad
Keyword(s):  
Additive Manufacturing ◽  
Reactive Extrusion ◽  
Low Energy
Sign in / Sign up

Export Citation Format

Share Document