Characterization of Residence Time Distribution in a Plug Flow Reactor

2019 ◽  
Vol 91 (5) ◽  
pp. 668-672 ◽  
Author(s):  
Innokentij Bogatykh ◽  
Thomas Osterland
Keyword(s):  
Residence Time ◽  
Time Distribution ◽  
Residence Time Distribution ◽  
Flow Reactor ◽  
Plug Flow ◽  
Plug Flow Reactor

scholarly journals Explicit Residence Time Distribution of a Generalised Cascade of Continuous Stirred Tank Reactors for a Description of Short Recirculation Time (Bypassing)

Processes ◽  
2019 ◽  
Vol 7 (9) ◽  
pp. 615 ◽  
Author(s):  
Peter Toson ◽  
Pankaj Doshi ◽  
Dalibor Jajcevic
Keyword(s):  
Residence Time ◽  
Time Distribution ◽  
Residence Time Distribution ◽  
Flow Reactor ◽  
Plug Flow ◽  
Stirred Tank ◽  
Stirred Tank Reactors ◽  
Delayed Impulse ◽  
In Series ◽  
Back Mixing

The tanks-in-series model (TIS) is a popular model to describe the residence time distribution (RTD) of non-ideal continuously stirred tank reactors (CSTRs) with limited back-mixing. In this work, the TIS model was generalised to a cascade of n CSTRs with non-integer non-negative n. The resulting model describes non-ideal back-mixing with n > 1. However, the most interesting feature of the n-CSTR model is the ability to describe short recirculation times (bypassing) with n < 1 without the need of complex reactor networks. The n-CSTR model is the only model that connects the three fundamental RTDs occurring in reactor modelling by variation of a single shape parameter n: The unit impulse at n→0, the exponential RTD of an ideal CSTR at n = 1, and the delayed impulse of an ideal plug flow reactor at n→∞. The n-CSTR model can be used as a stand-alone model or as part of a reactor network. The bypassing material fraction for the regime n < 1 was analysed. Finally, a Fourier analysis of the n-CSTR was performed to predict the ability of a unit operation to filter out upstream fluctuations and to model the response to upstream set point changes.

scholarly journals Derivation of a Multiparameter Gamma Model for Analyzing the Residence-Time Distribution Function for Nonideal Flow Systems as an Alternative to the Advection-Dispersion Equation

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Irucka Embry ◽  
Victor Roland ◽  
Oluropo Agbaje ◽  
Valetta Watson ◽  
Marquan Martin ◽  
...  
Keyword(s):  
Dispersion Equation ◽  
Residence Time ◽  
Time Distribution ◽  
Residence Time Distribution ◽  
Flow Reactor ◽  
Plug Flow ◽  
Absolute Deviation ◽  
Suitable Alternative ◽  
Advection Dispersion ◽  
Flow Systems

A new residence-time distribution (RTD) function has been developed and applied to quantitative dye studies as an alternative to the traditional advection-dispersion equation (AdDE). The new method is based on a jointly combined four-parameter gamma probability density function (PDF). The gamma residence-time distribution (RTD) function and its first and second moments are derived from the individual two-parameter gamma distributions of randomly distributed variables, tracer travel distance, and linear velocity, which are based on their relationship with time. The gamma RTD function was used on a steady-state, nonideal system modeled as a plug-flow reactor (PFR) in the laboratory to validate the effectiveness of the model. The normalized forms of the gamma RTD and the advection-dispersion equation RTD were compared with the normalized tracer RTD. The normalized gamma RTD had a lower mean-absolute deviation (MAD) (0.16) than the normalized form of the advection-dispersion equation (0.26) when compared to the normalized tracer RTD. The gamma RTD function is tied back to the actual physical site due to its randomly distributed variables. The results validate using the gamma RTD as a suitable alternative to the advection-dispersion equation for quantitative tracer studies of non-ideal flow systems.

Modeling and Hydraulic Characterization of a Filter-Press-Type Electrochemical Reactor by Using Residence Time Distribution Analysis and Hydraulic Indices

2018 ◽  
Vol 16 (10) ◽  
Author(s):  
Alejandro Regalado-Méndez ◽  
Juan Mentado-Morales ◽  
Carlos Estrada Vázquez ◽  
Gerardo Martínez-Villa ◽  
Mario E. Cordero ◽  
...  
Keyword(s):  
Residence Time ◽  
Time Distribution ◽  
Residence Time Distribution ◽  
Plug Flow ◽  
Electrochemical Reactor ◽  
Filter Press ◽  
Axial Dispersion ◽  
Hydraulic Efficiency ◽  
Volume Percent

Abstract Modeling and hydraulic characterization of a filter-press-type electrochemical reactor was studied by means of residence time distribution and hydraulic indices. For these purposes, a theoretical and approximation of residence time distribution experimental curves with axial dispersion model and Danckwerts’ boundary conditions, the Morrill dispersion index, the short-circuiting index, the Morrill volumetric efficiency index, and useful volume percent were used in order to establish deviation from plug-flow ideal, as well as dead volume, and the hydraulic efficiency. The hydraulic efficiency measure of the filter-press-type electrochemical reactor confirms uniformity of flow and a highly effective useful volume percent (91 %-98 % for all liquid flow rates tested). The axial dispersion coefficients computed (0.0005–0.0021 m2/s) indicates a small deviation of plug-flow ideal. Hence, the plug-flow reactor model is reliable for purpose modeling of the filter-press-type electrochemical reactor used in this research. Furthermore, hydrodynamic characterization of the tested filter-press-type electrochemical reactor by using hydraulic indices demonstrated its suitability for several electrochemical applications.

Modeling of Vortex-Flow Solar Reactor via Ideal Reactors in Series Approach

2010 ◽  
Author(s):  
Nesrin Ozalp ◽  
Vidyasagar Shilapuram ◽  
D. Jayakrishna
Keyword(s):  
Residence Time ◽  
Time Distribution ◽  
Residence Time Distribution ◽  
Vortex Flow ◽  
Flow Reactor ◽  
Flow Behavior ◽  
Plug Flow ◽  
Flow Reactors ◽  
In Series ◽  
Sweeping Gas

In this work, we present a thorough reaction engineering analysis on the modeling of a vortex-flow reactor to show that commonly practiced one-plug reactor approach is not sufficient to explain the flow behavior inside the reactor. Our study shows that N-plug flow reactors in series is the best approach in predicting the flow dynamics based on the computational fluid dynamics (CFD) simulations. We have studied the residence time distribution using CFD by two different methods. The residence time distribution characteristics are calculated by approximating the real reactor as N-ideal reactors in series, and then estimated the number of ideal reactors in series for the model. We have validated our CFD model by comparing the simulation results with experimental results. Finally, we have done a parametric study with a different sweeping gas to identify the best screening gas to avoid carbon deposition inside the vortex-flow reactor. Our results have shown that hydrogen is a better screening gas than argon.

scholarly journals Modeling Residence Time Distribution (RTD) Behavior in a Packed-Bed Electrochemical Reactor (PBER)

2019 ◽  
Vol 2019 ◽  
pp. 1-9 ◽  
Author(s):  
Sananth H. Menon ◽  
G. Madhu ◽  
Jojo Mathew
Keyword(s):  
Residence Time ◽  
Time Distribution ◽  
Residence Time Distribution ◽  
Flow Model ◽  
Plug Flow ◽  
Flow Characteristics ◽  
Theoretical Models ◽  
Packed Bed ◽  
Electrochemical Reactor ◽  
Tracer Studies

This paper focuses on understanding the electrolyte flow characteristics in a typical packed-bed electrochemical reactor using Residence Time Distribution (RTD) studies. RTD behavior was critically analyzed using tracer studies at various flow rates, initially under nonelectrolyzing conditions. Validation of these results using available theoretical models was carried out. Significant disparity in RTD curves under electrolyzing conditions was examined and details are recorded. Finally, a suitable mathematical model (Modified Dispersed Plug Flow Model (MDPFM)) was developed for validating these results under electrolyzing conditions.

Quantitative Analysis of Residence Time Distribution in Kenics Static Mixer

2012 ◽  
Vol 499 ◽  
pp. 198-202 ◽  
Author(s):  
Dan Jin ◽  
Hai Ling Fu ◽  
Jian Hua Wu ◽  
Dan Sun
Keyword(s):  
Quantitative Analysis ◽  
Residence Time ◽  
Time Distribution ◽  
Residence Time Distribution ◽  
Plug Flow ◽  
Axial Direction ◽  
Static Mixer ◽  
Mixing Quality ◽  
Experimental Approaches ◽  
The Mean

The residence time distribution in Kenics static mixer is investigated using experimental approaches. Experimentally, RTD measure in SK with pulse tracer technology was used to characterize flow and mixing quality. The effect of velocity on the RTD was investigated for all sections. The results show that the flow in SK mixer tends to the plug flow along the axial direction when the velocity increases. The quantization analysis, the effect of factors on the mean residence time, is done by using the power function considering the numbers of mixer element, diameter, element aspect radio, and velocity. The validity of this function is testified by other experiments.

The Mixing Characteristics and Residence Time Distribution of Cut Tobacco Particles in Drum Mixer

2011 ◽  
Vol 396-398 ◽  
pp. 297-301
Author(s):  
Wen Kui Zhu ◽  
Dong Liu ◽  
Jin Song Du
Keyword(s):  
Residence Time ◽  
Time Distribution ◽  
Residence Time Distribution ◽  
Plug Flow ◽  
Processing System ◽  
Rotating Speed ◽  
Drum Mixer ◽  
Method Effects ◽  
Residence Time Distributions ◽  
Cut Tobacco

Residence time distributions were determined for the continuous processing of cut tobacco in the rotary drum by introducing expanded cut tobacco tracers to the inlet of the processing system using the negative step change method. Effects of rotating speed of the rotary cylinder and solids flow rate on the mixing homogenization and residence time distribution (RTD) of experiment materials was investigated. PER-CSTR series model and multistage CSTR model were used to fit the experimental results. The result shows mixing homogenization increased significantly with the increasing feeding rate of cut tobacco and decreasing drum rotating speed. PER-CSTR series model is more suitable to describe the RTD characteristics of flow materials in drum. The axis movement of cut tobacco along the drum is approximate to the plug-flow.

Sign in / Sign up

Export Citation Format

Share Document