Enhancement of Mechanical Stability and Ionic Conductivity of Chitosan‐based Solid Polymer Electrolytes Using Silver Nanowires as Fillers

2019 ◽  
Vol 40 (9) ◽  
pp. 898-905 ◽  
Author(s):  
Jae Seok Kim ◽  
Jong Kuk Lim ◽  
Jin Seong Park
Keyword(s):  
Ionic Conductivity ◽  
Polymer Electrolytes ◽  
Mechanical Stability ◽  
Silver Nanowires ◽  
Solid Polymer Electrolytes ◽  
Solid Polymer

Solid Polymer Electrolytes from Crosslinked PEG and Dilithium N,N'-Bis(trifluoromethanesulfonyl)perfluoroalkane-1,ω-disulfonamide and Lithium Bis(trifluoromethanesulfonyl)imide Salts

2008 ◽  
Vol 73 (12) ◽  
pp. 1777-1798 ◽  
Author(s):  
Olt E. Geiculescu ◽  
Rama V. Rajagopal ◽  
Emilia C. Mladin ◽  
Stephen E. Creager ◽  
Darryl D. Desmarteau
Keyword(s):  
Ionic Conductivity ◽  
Polymer Electrolytes ◽  
Minimum Energy ◽  
Ionic Conductivities ◽  
Solid Polymer Electrolytes ◽  
Solid Polymer ◽  
Segmental Motion ◽  
Concentrated Electrolytes ◽  
Two Factors ◽  
Poly Ethylene

The present work consists of a series of studies with regard to the structure and charge transport in solid polymer electrolytes (SPE) prepared using various new bis(trifluoromethanesulfonyl)imide (TFSI)-based dianionic dilithium salts in crosslinked low-molecular-weight poly(ethylene glycol). Some of the thermal properties (glass transition temperature, differential molar heat capacity) and ionic conductivities were determined for both diluted (EO/Li = 30:1) and concentrated (EO/Li = 10:1) SPEs. Trends in ionic conductivity of the new SPEs with respect to anion structure revealed that while for the dilute electrolytes ionic conductivity is generally rising with increased length of the perfluoroalkylene linking group in the dianions, for the concentrated electrolytes the trend is reversed with respect to dianion length. This behavior could be the result of a combination of two factors: on one hand a decrease in dianion basicity that results in diminished ion pairing and an enhancement in the number of charge carriers with increasing fluorine anion content, thereby increasing ionic conductivity while on the other hand the increasing anion size and concentration produce an increase in the friction/entanglements of the polymeric segments which lowers even more the reduced segmental motion of the crosslinked polymer and decrease the dianion contribution to the overall ionic conductivity. DFT modeling of the same TFSI-based dianionic dilithium salts reveals that the reason for the trend observed is due to the variation in ion dissociation enthalpy, derived from minimum-energy structures, with respect to perfluoroalkylene chain length.

scholarly journals A Critical Review for an Accurate Electrochemical Stability Window Measurement of Solid Polymer and Composite Electrolytes

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3840
Author(s):  
Adrien Méry ◽  
Steeve Rousselot ◽  
David Lepage ◽  
Mickaël Dollé
Keyword(s):  
Ionic Conductivity ◽  
Energy Density ◽  
High Performance ◽  
Mechanical Stability ◽  
Electrochemical Stability ◽  
Solid Polymer Electrolytes ◽  
Solid Polymer ◽  
Composite Electrolytes ◽  
Battery System ◽  
Electrochemical Stability Window

All-solid-state lithium batteries (ASSLB) are very promising for the future development of next generation lithium battery systems due to their increased energy density and improved safety. ASSLB employing Solid Polymer Electrolytes (SPE) and Solid Composite Electrolytes (SCE) in particular have attracted significant attention. Among the several expected requirements for a battery system (high ionic conductivity, safety, mechanical stability), increasing the energy density and the cycle life relies on the electrochemical stability window of the SPE or SCE. Most published works target the importance of ionic conductivity (undoubtedly a crucial parameter) and often identify the Electrochemical Stability Window (ESW) of the electrolyte as a secondary parameter. In this review, we first present a summary of recent publications on SPE and SCE with a particular focus on the analysis of their electrochemical stability. The goal of the second part is to propose a review of optimized and improved electrochemical methods, leading to a better understanding and a better evaluation of the ESW of the SPE and the SCE which is, once again, a critical parameter for high stability and high performance ASSLB applications.

Polyvinyl fibers as outperform candidature in the solid polymer electrolytes

2020 ◽  
pp. 152808372097062
Author(s):  
Muhammad Yameen Solangi ◽  
Umair Aftab ◽  
Muhammad Ishaque ◽  
Aqeel Bhutto ◽  
Ayman Nafady ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Weight Loss ◽  
Ionic Conductivity ◽  
Polymer Electrolytes ◽  
Vital Role ◽  
Solid Polymer Electrolytes ◽  
Solid Polymer ◽  
Main Challenge ◽  
Different Temperatures ◽  
Solution Cast

Solid polymer electrolytes (SPEs) are the best choice to replace liquid electrolytes in supercapacitors, fuel cells, solar cells and batteries. The main challenge in this filed is the ionic conductivity and thermal stability of SPEs which is still not up to mark, therefore more investigations are needed to address these issues. In this study, PVA/salt based SPEs was fabricated using both solution cast and electro-spinning methods to probe the effect of different salts such as (NaCl, KCl and KI) and their concentrations on the ionic conductivity. Scanning electron microscopy (SEM) x and Fourier Transform Infra-Red (FTIR) have been employed to study the morphology as well as the different functional groups of SPEs, respectively. It was noted that small addition of NaCl, KCl and KI salts in SPEs dramatically increased the ionic conductivity to 5.95×10−6, 5.31×10−6 and 4.83×10−6 S/cm, respectively. Importantly, the SPEs obtained with NaCl via electro-spinning have higher ionic conductivity (5.95×10−6 S/cm) than their casted SPEs (1.87×10−6 S/cm). Thermal stability was also studied at two different temperatures i.e. 80 °C and 100 °C. The weight loss percentage of electrospun SPEs have zero percent weight loss than the solution based SPEs. The combined results clearly indicated that the nature of salt, concentration and fabrication process play a vital role in the ionic conductivity. Also, the NaCl salt with low molecular weight at low concentrations shows an enhanced ionic conductivity.

Characterization of Plasticized PMMA-LiClO4 Solid Polymer Electrolytes

2012 ◽  
Vol 585 ◽  
pp. 185-189 ◽  
Author(s):  
Rajni Sharma ◽  
Anjan Sil ◽  
Subrata Ray
Keyword(s):  
Ionic Conductivity ◽  
Polymer Electrolytes ◽  
Thermal Analyses ◽  
Impedance Analysis ◽  
Solid Polymer Electrolytes ◽  
Solid Polymer ◽  
Casting Technique ◽  
Ac Impedance Analysis ◽  
Solution Casting Technique

In the present work, the effect of Li salt i.e. LiClO4 contained in composite plasticizer (PC+DEC) with three different concentrations on ionic transport and other electrochemical properties of PMMA based gel polymer electrolytes synthesized has been investigated. The electrolytes have been synthesized by solution casting technique by varying the wt (%) of salt and plasticizer. The formation of polymer-salt complexes and their structural characterization have been carried out by FTIR spectroscopic and XRD analyses. The room temperature ionic conductivity of the electrolyte composition 0.6PMMA-0.125(PC+DEC)-0.15LiClO4 (wt %) has been found to be maximum whose magnitude is 0.40×10-5 S/cm as determined by ac impedance analysis. The temperature dependent ionic conductivity of electrolyte sample0.6PMMA-0.125(PC+DEC)-0.15LiClO4 has further been investigated. Thermal analyses of electrolyte samples of all three compositions have also been done.

Highly efficient solid polymer electrolytes using ion containing polymer microgels

2015 ◽  
Vol 6 (7) ◽  
pp. 1052-1055 ◽  
Author(s):  
Suting Yan ◽  
Jianda Xie ◽  
Qingshi Wu ◽  
Shiming Zhou ◽  
Anqi Qu ◽  
...  
Keyword(s):  
Ionic Conductivity ◽  
Polymer Electrolyte ◽  
Lithium Batteries ◽  
Polymer Electrolytes ◽  
Solid Polymer Electrolyte ◽  
Solid Polymer Electrolytes ◽  
High Ionic Conductivity ◽  
Solid Polymer ◽  
Highly Efficient ◽  
Potential Use

A solid polymer electrolyte fabricated using ion containing microgels manifests high ionic conductivity for potential use in lithium batteries.

scholarly journals Contribution Succinonitrile additive for Performa LiTFSi Solid Polymer Electrolytes for Li-Ion Battery

2020 ◽  
Vol 20 (2) ◽  
Author(s):  
Qolby Sabrina ◽  
Titik Lestariningsih ◽  
Christin Rina Ratri ◽  
Achmad Subhan
Keyword(s):  
Ionic Conductivity ◽  
Polymer Electrolytes ◽  
Room Temperature ◽  
Lithium Salt ◽  
Ionic Conduction ◽  
Lithium Ion ◽  
Solid Polymer Electrolytes ◽  
Solid Polymer ◽  
Half Cell ◽  
Li Ion

Solid polymer electrolyte (SPE) appropriate to solve packaging leakage and expansion volume in lithium-ion battery systems. Evaluation of electrochemical performance of SPE consisted of mixture lithium salt, solid plasticizer, and polymer precursor with different ratio. Impedance spectroscopy was used to investigate ionic conduction and dielectric response lithium bis(trifluoromethane)sulfony imide (LiTFSI) salt, and additive succinonitrile (SCN) plasticizer. The result showing enhanced high ionic conductivity. In half-cell configurations, wide electrochemical stability window of the SPE has been tested. Have stability window at room temperature, indicating great potential of SPE for application in lithium ion batteries. Additive SCN contribute to forming pores that make it easier for the li ion to move from the anode to the cathode and vice versa for better perform SPE. Pore of SPE has been charaterization with FE-SEM. Additive 5% w.t SCN shows the best ionic conductivity with 4.2 volt wide stability window and pretty much invisible pores.

scholarly journals Salt Concentration Effect on Electrical and Dielectric Properties of Solid Polymer Electrolytes based Carboxymethyl Cellulose for Lithium-ion Batteries

2021 ◽  
Vol 12 (5) ◽  
pp. 6114-6123
Keyword(s):  
Dielectric Properties ◽  
Ionic Conductivity ◽  
Polymer Electrolytes ◽  
Carboxymethyl Cellulose ◽  
Electrochemical Impedance ◽  
Lithium Ion ◽  
Lithium Perchlorate ◽  
Linear Sweep Voltammetry ◽  
Solid Polymer Electrolytes ◽  
Solid Polymer

Solid polymer electrolytes (SPEs) based carboxymethyl cellulose (CMC) with lithium perchlorate (LiClO4) were prepared via solution drop-cast technique. The CMC host is complexed by different concentrations of LiClO4 salt. SPEs were characterized by Electrochemical Impedance Spectroscopy (EIS) and Linear Sweep Voltammetry (LSV) in coin cells with lithium metal electrodes. EIS performed unique results based on various ionic conductivity values and dielectric properties. The higher ionic conductivity (1.32 × 10-5 S/cm) was obtained by SPEs 2 following by short-range ionic transport results based on dielectric properties depending on frequency. SPEs with LiClO4 addition are electrochemically stable over 2 V in lithium battery coin cells from LSV results.

Sign in / Sign up

Export Citation Format

Share Document