Thermally induced increase in energy transport capacity of silkworm silks

By all measures, the data storage industry is one of the most important components of the Information Technology (IT) revolution. In recent years, many of the emerging technologies rely heavily on energy transport at extremely short time and length scales as a mean to overcome the superparamagnetic limit - a serious impediment to future advancement of storage technology. Additionally, thermally induced failure and reliability issues at the nanoscale are becoming increasingly important due to rapid device miniaturization in data storage applications. Further advances in high-technology data storage systems will be difficult, if not impossible, without rigorous treatment of nanoscale energy transport. This manuscript reviews the thermal design issues and challenges in thermally assisted magnetic disk recording, thermally assisted scanned probe recording, phase change optical data recording, magnetoresistive random access memory (MRAM) and giant magnetoresistive (GMR) heads. Relevant thermally induced failures in GMR heads, write coil, interconnects and MRAM will be discussed as well.

Download Full-text

Influence of network externality on new energy transport capacity investment decision and its social effects

Information Management and Management Engineering ◽

10.2495/imme140671 ◽

2014 ◽

Author(s):

Jiamin Zhao

Keyword(s):

Energy Transport ◽

Investment Decision ◽

Social Effects ◽

Network Externality ◽

Transport Capacity ◽

Capacity Investment ◽

New Energy

Download Full-text

Energy, transport, and consumption in the Industrial Revolution

Behavioral and Brain Sciences ◽

10.1017/s0140525x19000153 ◽

2019 ◽

Vol 42 ◽

Author(s):

Joseph A. Tainter ◽

Temis G. Taylor

Keyword(s):

Mass Production ◽

Industrial Revolution ◽

Energy Transport ◽

Underlying Assumption

Abstract We question Baumard's underlying assumption that humans have a propensity to innovate. Affordable transportation and energy underpinned the Industrial Revolution, making mass production/consumption possible. Although we cannot accept Baumard's thesis on the Industrial Revolution, it may help explain why complexity and innovation increase rapidly in the context of abundant energy.

Download Full-text

Morphologies of Nonadherent Al2O3 and Matching Substrate Surfaces

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010009587x ◽

1972 ◽

Vol 30 ◽

pp. 524-525

Author(s):

C. S. Giggins ◽

J. K. Tien ◽

B. H. Kear ◽

F. S. Pettit

Keyword(s):

Electron Microscopy ◽

Oxide Scale ◽

Oxidation Resistance ◽

Substrate Surface ◽

Morphological Features ◽

Thermally Induced ◽

Oxide Spallation ◽

Oxidation Resistant ◽

Induced Stresses ◽

Substrate Surfaces

The performance of most oxidation resistant alloys and coatings is markedly improved if the oxide scale strongly adheres to the substrate surface. Consequently, in order to develop alloys and coatings with improved oxidation resistance, it has become necessary to determine the conditions that lead to spallation of oxides from the surfaces of alloys. In what follows, the morphological features of nonadherent Al2O3, and the substrate surfaces from which the Al2O3 has spalled, are presented and related to oxide spallation.The Al2O3, scales were developed by oxidizing Fe-25Cr-4Al (w/o) and Ni-rich Ni3 (Al,Ta) alloys in air at 1200°C. These scales spalled from their substrates upon cooling as a result of thermally induced stresses. The scales and the alloy substrate surfaces were then examined by scanning and replication electron microscopy.The Al2O3, scales from the Fe-Cr-Al contained filamentary protrusions at the oxide-gas interface, Fig. 1(a). In addition, nodules of oxide have been developed such that cavities were formed between the oxide and the substrate, Fig. 1(a).

Download Full-text

Applications of ultramicrotomy for materials characterization

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100147004 ◽

1993 ◽

Vol 51 ◽

pp. 232-233

Author(s):

R.T. Blackham ◽

J.J. Haugh ◽

C.W. Hughes ◽

M.G. Burke

Keyword(s):

Materials Science ◽

Microstructural Analysis ◽

Analytical Electron Microscopy ◽

Austenitic Stainless Steels ◽

Specimen Preparation ◽

Preparation Technique ◽

Thermally Induced ◽

Radiation Induced ◽

Characterization Of Materials

Essential to the characterization of materials using analytical electron microscopy (AEM) techniques is the specimen itself. Without suitable samples, detailed microstructural analysis is not possible. Ultramicrotomy, or diamond knife sectioning, is a well-known mechanical specimen preparation technique which has been gaining attention in the materials science area. Malis and co-workers and Glanvill have demonstrated the usefulness and applicability of this technique to the study of a wide variety of materials including Al alloys, composites, and semiconductors. Ultramicrotomed specimens have uniform thickness with relatively large electron-transparent areas which are suitable for AEM anaysis.Interface Analysis in Type 316 Austenitic Stainless Steel: STEM-EDS microanalysis of grain boundaries in austenitic stainless steels provides important information concerning the development of Cr-depleted zones which accompany M23C6 precipitation, and documentation of radiation induced segregation (RIS). Conventional methods of TEM sample preparation are suitable for the evaluation of thermally induced segregation, but neutron irradiated samples present a variety of problems in both the preparation and in the AEM analysis, in addition to the handling hazard.

Download Full-text

Spin-crossover in an iron(iii) complex showing a broad thermal hysteresis

Dalton Transactions ◽

10.1039/d0dt03610b ◽

2021 ◽

Author(s):

Cyril Rajnák ◽

Romana Mičová ◽

Ján Moncoľ ◽

Ľubor Dlháň ◽

Christoph Krüger ◽

...

Keyword(s):

Schiff Base ◽

Schiff Base Ligand ◽

Spin Crossover ◽

Thermal Hysteresis ◽

Mononuclear Complex ◽

Hysteresis Width ◽

Thermally Induced

A pentadentate Schiff-base ligand 3,5Cl-L2− and NCSe− form a iron(iii) mononuclear complex [Fe(3,5Cl-L)(NCSe)], which shows a thermally induced spin crossover with a broad hysteresis width of 24 K between 123 K (warming) and 99 K (cooling).

Download Full-text