Magnetic susceptibility and proton Knight shift in Pd-Ag and Pd-(rare earth) solid solution alloy hydrides

1998 ◽  
Vol 102 (4) ◽  
pp. 629-641 ◽  
Author(s):  
Bernd Sinsel ◽  
Herbert Anton ◽  
Peter C. Schmidt ◽  
Norbert Weiden ◽  
Alarich Weiss
Keyword(s):  
Solid Solution ◽  
Magnetic Susceptibility ◽  
Rare Earth ◽  
Knight Shift ◽  
Solid Solution Alloy

Fine Microstructure of a Mechanically Alloyed Oxide Dispersion Strengthened Nickel-Base Superalloy

1977 ◽  
Vol 35 ◽  
pp. 298-299
Author(s):  
Jordi Marti ◽  
Timothy E. Howson ◽  
David Kratz ◽  
John K. Tien
Keyword(s):  
Solid Solution ◽  
Volume Fraction ◽  
Stress Rupture ◽  
Oxide Dispersion Strengthened ◽  
Solid Solution Alloy ◽  
Oxide Dispersion ◽  
Creep And Stress Rupture ◽  
Mechanically Alloyed ◽  
Fine Microstructure ◽  
Nickel Base

The previous paper briefly described the fine microstructure of a mechanically alloyed oxide dispersion strengthened nickel-base solid solution. This note examines the fine microstructure of another mechanically alloyed system. This alloy differs from the one described previously in that it is more generously endowed with coherent precipitate γ forming elements A1 and Ti and it contains a higher volume fraction of the finely dispersed Y2O3 oxide. An interesting question to answer in the comparative study of the creep and stress rupture of these two ODS systems is the role of the precipitate γ' in the mechanisms of creep and stress rupture in alloys already containing oxide dispersoids.The nominal chemical composition of this alloy is Ni - 20%Cr - 2.5%Ti - 1.5% A1 - 1.3%Y203 by weight. The system receives a three stage heat treatment-- the first designed to produce a coarse grain structure similar to the solid solution alloy but with a smaller grain aspect ratio of about ten.

High-resolution EM study of submicrometer-grained Al-Mg solid solution alloys

1995 ◽  
Vol 53 ◽  
pp. 524-525
Author(s):  
Z. Horita ◽  
D. J. Smith ◽  
M. Furukawa ◽  
M. Nemoto ◽  
R. Z. Valiev ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
High Resolution ◽  
Grain Boundaries ◽  
Energy State ◽  
High Energy ◽  
Grain Structure ◽  
Boundary Structure ◽  
Solid Solution Alloy ◽  
Average Grain Size

It is possible to produce metallic materials with submicrometer-grained (SMG) structures by imposing an intense plastic strain under quasi-hydrostatic pressure. Studies using conventional transmission electron microscopy (CTEM) showed that many grain boundaries in the SMG structures appeared diffuse in nature with poorly defined transition zones between individual grains. The implication of the CTEM observations is that the grain boundaries of the SMG structures are in a high energy state, having non-equilibrium character. It is anticipated that high-resolution electron microscopy (HREM) will serve to reveal a precise nature of the grain boundary structure in SMG materials. A recent study on nanocrystalline Ni and Ni3Al showed lattice distortion and dilatations in the vicinity of the grain boundaries. In this study, HREM observations are undertaken to examine the atomic structure of grain boundaries in an SMG Al-based Al-Mg alloy.An Al-3%Mg solid solution alloy was subjected to torsion straining to produce an equiaxed grain structure with an average grain size of ~0.09 μm.

Magnetic susceptibility of liquid heavy rare earth metals

1979 ◽  
Vol 40 (C5) ◽  
pp. C5-260-C5-261 ◽  
Author(s):  
M. Müller ◽  
E. Huber ◽  
H.-J. Güntherodt
Keyword(s):  
Magnetic Susceptibility ◽  
Rare Earth ◽  
Rare Earth Metals ◽  
Heavy Rare Earth

CARLSON ALLOY C600 and C600 ESR

Alloy Digest ◽  
1994 ◽  
Vol 43 (11) ◽  
Keyword(s):  
Mechanical Properties ◽  
Solid Solution ◽  
Fracture Toughness ◽  
Cold Working ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Solid Solution Alloy ◽  
Resistance To Oxidation ◽  
Good Workability

Abstract CARLSON ALLOYS C600 AND C600 ESR have excellent mechanical properties from sub-zero to elevated temperatures with excellent resistance to oxidation at high temperatures. It is a solid-solution alloy that can be hardened only by cold working. High strength at temperature is combined with good workability. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Ni-470. Producer or source: G.O. Carlson Inc.

INCONEL ALLOY 601

Alloy Digest ◽  
1970 ◽  
Vol 19 (4) ◽  
Keyword(s):  
Solid Solution ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Solid Solution Alloy ◽  
Process Industries ◽  
Inconel Alloy ◽  
Nickel Chromium

Abstract INCONEL Alloy 601 is a nickel-chromium solid-solution alloy with excellent high-temperature properties which make it attractive for many application in aerospace and process industries. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-152. Producer or source: Huntington Alloy Products Division, An INCO Company.

scholarly journals Effect of Rare Earth Ce on Deep Stamping Properties of High-Strength Interstitial-Free Steel Containing Phosphorus

Materials ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1473
Author(s):  
Hao Wang ◽  
Yanping Bao ◽  
Chengyi Duan ◽  
Lu Lu ◽  
Yan Liu ◽  
...  
Keyword(s):  
Solid Solution ◽  
Grain Size ◽  
Rare Earth ◽  
High Strength ◽  
Rolling Process ◽  
P Element ◽  
Second Phase ◽  
Strengthening Effect ◽  
Interstitial Free ◽  
If Steel

The influence of rare earth Ce on the deep stamping property of high-strength interstitial-free (IF) steel containing phosphorus was analyzed. After adding 120 kg ferrocerium alloy (Ce content is 10%) in the steel, the inclusion statistics and the two-dimensional morphology of the samples in the direction of 1/4 thickness of slab and each rolling process were observed and compared by scanning electron microscope (SEM). After the samples in each rolling process were treated by acid leaching, the three-dimensional morphology and components of the second phase precipitates were observed by SEM and energy dispersive spectrometer (EDS). The microstructure of the sample was observed by optical microscope, and the grain size was compared. Meanwhile, the content and strength of the favorable texture were analyzed by X-ray diffraction (XRD). Finally, the mechanical properties of the product were analyzed. The results showed that: (1) The combination of rare earth Ce with activity O and S in steel had lower Gibbs free energy, and it was easy to generate CeAlO3, Ce2O2S, and Ce2O3. The inclusions size was obviously reduced, but the number of inclusions was increased after adding rare earth. The morphology of inclusions changed from chain and strip to spherical. The size of rare earth inclusions was mostly about 2–5 μm, distributed and dispersed, and their elastic modulus was close to that of steel matrix, which was conducive to improving the structure continuity of steel. (2) The rare earth compound had a high melting point. As a heterogeneous nucleation point, the nucleation rate was increased and the solidification structure was refined. The grade of grain size of products was increased by 1.5 grades, which is helpful to improve the strength and plasticity of metal. (3) Rare earth Ce can inhibit the segregation of P element at the grain boundary and the precipitation of Fe(Nb+Ti)P phase. It can effectively increase the solid solution amount of P element in steel, improve the solid solution strengthening effect of P element in high-strength IF steel, and obtain a large proportion of {111} favorable texture, which is conducive to improving the stamping formability index r90 value.

Sign in / Sign up

Export Citation Format

Share Document