Investigation of the Mass Transfer through Turbulent Boundary Layers in Liquid-Liquid Emulsions

1977 ◽  
Vol 81 (8) ◽  
pp. 728-732 ◽  
Author(s):  
R. Dworak ◽  
Hartmut Wendt
AIAA Journal ◽  
1986 ◽  
Vol 24 (3) ◽  
pp. 528-529
Author(s):  
Gustave J. Hokenson

1987 ◽  
Vol 54 (1) ◽  
pp. 197-202 ◽  
Author(s):  
C. A. J. Fletcher ◽  
R. W. Fleet

The Dorodnitsyn finite element formulation is extended to cover incompressible, two-dimensional turbulent boundary layers with surface mass transfer in the normal direction. The method is shown to give accurate and economical answers with only eleven points spanning the boundary layer. Good agreement is obtained when the computational solutions are compared with the experimental results of McQuaid [13] for skin friction coefficient, displacement and momentum thickness and velocity profiles. Zero and adverse pressure gradient and discontinuous injection cases have been considered.


2008 ◽  
Vol 130 (2) ◽  
Author(s):  
Xia Wang ◽  
Luciano Castillo ◽  
Guillermo Araya

Based on the theory of similarity analysis and the analogy between momentum and energy transport equations, the temperature scalings have been derived for forced convection turbulent boundary layers. These scalings are shown to be able to remove the effects of Reynolds number and the pressure gradient on the temperature profile. Furthermore, using the near-asymptotic method and the scalings from the similarity analysis, a power law solution is obtained for the temperature profile in the overlap region. Subsequently, a composite temperature profile is found by further introducing the functions in the wake region and in the near-the-wall region. The proposed composite temperature profile can describe the entire boundary layer from the wall all the way to the outer edge of the turbulent boundary layer at finite Re number. The experimental data and direct numerical simulation (DNS) data with zero pressure gradient and adverse pressure gradient are used to confirm the accuracy of the scalings and the proposed composite temperature profiles. Comparison with the theoretical profiles by Kader (1981, “Temperature and Concentration Profiles in Fully Turbulent Boundary Layers,” Int. J. Heat Mass Transfer, 24, pp. 1541–1544; 1991, “Heat and Mass Transfer in Pressure-Gradient Boundary Layers,” Int. J. Heat Mass Transfer, 34, pp. 2837–2857) shows that the current theory yields a higher accuracy. The error in the mean temperature profile is within 5% when the present theory is compared to the experimental data. Meanwhile, the Stanton number is calculated using the energy and momentum integral equations and the newly proposed composite temperature profile. The calculated Stanton number is consistent with previous experimental results and the DNS data, and the error of the present prediction is less than 5%. In addition, the growth of the thermal boundary layer is obtained from the theory and the average error is less than 5% for the range of Reynolds numbers between 5×105 and 5×106 when compared with the empirical correlation for the experimental data of isothermal boundary layer conditions.


1964 ◽  
Vol 28 (6) ◽  
pp. 467-473,a1
Author(s):  
Akira Hirata ◽  
Tosuke Sato ◽  
Tadashi Shirotsuka

Sign in / Sign up

Export Citation Format

Share Document