Assessment of the Effect of Instrumental and Discretization Errors on Derivative-based Potential-field Geophysical Methods

2012 ◽  
Vol 19 (2) ◽  
pp. 75-87
Author(s):  
Christian M. Milea ◽  
Constantinos B. Papazachos ◽  
Gregory N. Tsokas ◽  
Panagiotis I. Tsourlos
Keyword(s):  
Potential Field ◽  
Geophysical Methods ◽  
Discretization Errors

Gravity and magnetic data analysis based on Poisson wavelet-transforms

2020 ◽  
Author(s):  
Kirill Kuznetsov ◽  
Bulychev Andrey ◽  
Ivan Lygin
Keyword(s):  
Data Analysis ◽  
Magnetic Fields ◽  
Potential Field ◽  
Wavelet Transforms ◽  
Geophysical Methods ◽  
Magnetic Data ◽  
Potential Field Data ◽  
Gravity And Magnetic ◽  
Gravity And Magnetic Data ◽  
Poisson Wavelets

<p>Studies of the Earth’s interior structure are one of the most complex topics in modern science. Integration of different geophysical methods plays a key role in effectively tackling the problem. In the last decade capabilities of potential field geophysical methods have been increasing due to development of advanced digital technologies. Improved resolution and accuracy of gravity and magnetic fields measurements made by modern equipment makes it possible to build more detailed geological models. Different tectonic and structural elements being interpreted in such models produce potential field signals with different spectral characteristics. Like any geophysical signals, potential fields can be described as a spatially non-stationary signal. This means its frequency content may change depending on a given signal sample, in particular with different spatial location of a sample. In this case, approaches of gravity and magnetic fields analysis based on Fourier transform or signal decomposition into a number of harmonic functions can lead to incorrect results. One of the ways to solve this challenge involves using wavelet transform based algorithms, since these transforms do not assume stationary signals and each function of a wavelet-based basis is localized in space domain.</p><p>In gravity and magnetic data analysis it is beneficial to use wavelets based on partial derivatives of the Poisson kernel, which correspond to derivatives of a point source gravity potential. Application of Poisson wavelets in potential field data analysis has begun in the 1990's and is predominantly aimed at studying gravity and magnetic fields singularity points during data interpretation.</p><p>Similar to Fourier-based potential field techniques, it is possible to construct a number of data filtering algorithms based on Poisson wavelets. Current work demonstrates that it is possible to construct algorithms based on Poisson wavelets for transforming profile and spatially gridded gravity and magnetic data, e.g. for calculation of equivalent density and magnetization distributions, upward and downward continuations, reduction to pole and many other filters that take into account spatial distribution of the signal.</p><p>Wavelet-transforms allow to account for spatially non-stationary nature of geophysical signals. Use of wavelet based techniques allows to effectively carry out potential field data interpretation in a variety of different geologic and tectonic settings in a consistent fashion.</p>

Galactic orbits of stars

1966 ◽  
Vol 25 ◽  
pp. 93-97
Author(s):  
Richard Woolley
Keyword(s):  
Globular Cluster ◽  
Potential Field ◽  
High Velocity ◽  
Velocity Vector ◽  
Variable Stars ◽  
The Sun ◽  
Proper Motions ◽  
Rr Lyrae ◽  
The Galaxy

It is now possible to determine proper motions of high-velocity objects in such a way as to obtain with some accuracy the velocity vector relevant to the Sun. If a potential field of the Galaxy is assumed, one can compute an actual orbit. A determination of the velocity of the globular clusterωCentauri has recently been completed at Greenwich, and it is found that the orbit is strongly retrograde in the Galaxy. Similar calculations may be made, though with less certainty, in the case of RR Lyrae variable stars.

Integration of Multi-geophysical Approaches to Identify Potential Pathways of Heavy Metals Contamination - A Case Study in Zeida, Morocco

2020 ◽  
Vol 25 (3) ◽  
pp. 415-423
Author(s):  
Ahmed Lachhab ◽  
El Mehdi Benyassine ◽  
Mohamed Rouai ◽  
Abdelilah Dekayir ◽  
Jean C. Parisot ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Seismic Velocity ◽  
Seismic Refraction ◽  
Geophysical Methods ◽  
Low Frequency ◽  
Electrical Current ◽  
P Wave ◽  
Low Resistivity ◽  
Refraction Tomography ◽  
Geophysical Surveys

The tailings of Zeida's abandoned mine are found near the city of Midelt, in the middle of the high Moulouya watershed between the Middle and the High Atlas of Morocco. The tailings occupy an area of about 100 ha and are stored either in large mining pit lakes with clay-marl substratum or directly on a heavily fractured granite bedrock. The high contents of lead and arsenic in these tailings have transformed them into sources of pollution that disperse by wind, runoff, and seepage to the aquifer through faults and fractures. In this work, the main goal is to identify the pathways of contaminated water with heavy metals and arsenic to the local aquifers, water ponds, and Moulouya River. For this reason, geophysical surveys including electrical resistivity tomography (ERT), seismic refraction tomography (SRT) and very low-frequency electromagnetic (VLF-EM) methods were carried out over the tailings, and directly on the substratum outside the tailings. The result obtained from combining these methods has shown that pollutants were funneled through fractures, faults, and subsurface paleochannels and contaminated the hydrological system connecting groundwater, ponds, and the river. The ERT profiles have successfully shown the location of fractures, some of which extend throughout the upper formation to depths reaching the granite. The ERT was not successful in identifying fractures directly beneath the tailings due to their low resistivity which inhibits electrical current from propagating deeper. The seismic refraction surveys have provided valuable details on the local geology, and clearly identified the thickness of the tailings and explicitly marked the boundary between the Triassic formation and the granite. It also aided in the identification of paleochannels. The tailings materials were easily identified by both their low resistivity and low P-wave velocity values. Also, both resistivity and seismic velocity values rapidly increased beneath the tailings due to the compaction of the material and lack of moisture and have proven to be effective in identifying the upper limit of the granite. Faults were found to lie along the bottom of paleochannels, which suggest that the locations of these channels were caused by these same faults. The VLF-EM surveys have shown tilt angle anomalies over fractured areas which were also evinced by low resistivity area in ERT profiles. Finally, this study showed that the three geophysical methods were complementary and in good agreement in revealing the pathways of contamination from the tailings to the local aquifer, nearby ponds and Moulouya River.

Geotechnical investigation through SP, Electrical Resistivity and GPR geophysical methods

Geotecnia ◽  
2016 ◽  
Vol 137 ◽  
pp. 141-155
Author(s):  
Herson Oliveira da Rocha ◽  
◽  
Lúcia Maria Costa e Silva ◽  
João Andrade dos Reis Júnior ◽  
◽  
...  
Keyword(s):  
Electrical Resistivity ◽  
Geophysical Methods ◽  
Geotechnical Investigation

Identifikasi Potensi Air Tanah untuk Kebutuhan Penyediaan Air Bersih dengan Metode Geolistrik: Studi Kasus di Kawasan Geostech, Puspiptek Serpong

2020 ◽  
Vol 21 (2) ◽  
pp. 204-212
Author(s):  
Heru Sri Naryanto ◽  
Puspa Khaerani ◽  
Syakira Trisnafiah ◽  
Achmad Fakhrus Shomim ◽  
Wisyanto Wisyanto ◽  
...  
Keyword(s):  
Geophysical Methods ◽  
Groundwater Potential ◽  
Clean Water ◽  
Rock Types ◽  
Groundwater Aquifers ◽  
Groundwater Aquifer ◽  
Groundwater Origin ◽  
Laboratory Facility ◽  
Potential Groundwater ◽  
Lower Depth

ABSTRACTGeostech Building, as an office and laboratory facility, requires a source of clean water from groundwater related to the limited supply of clean water from the PDAM. Due to the needs of freshwater from groundwater origin, data and information are needed regarding the potential groundwater in the area, including aquifer configuration, depth, and groundwater potential. The presence of groundwater is not distributed through every area, and it's related to the geological and geohydrological conditions. One of the geophysical methods that can describe subsurface is 2D geoelectric methods. This method can distinguish and analyze rock types, geological structures, groundwater aquifers, and other important information based on the characteristics of the electricity of rocks by looking at the value of the type of resistance. In this measurement, the Wenner Alpha configuration has been used, where the arrangement of A-B current electrodes and M-N potential electrodes have constant spacing. From the measurement results, it can be interpreted that there is a low resistivity layer containing porous groundwater as an aquifer. Based on regional geological data, it has been estimated that this layer is in the form of sandy tuff (0-1.5 ohm-m). The exploitation of groundwater with drilling is expected to reach the aquifer's upper layer at depth, starting from 11.5-13 meters. The groundwater aquifer thickness cannot be ascertained because of the penetration of the lower depth of 2D geoelectric measurements truncated by the constraint of a maximum stretch of cable. The upper layer of the aquifer contains a turned layer of fine tufa and medium tuff, which is impermeable, coarse tuff, and mixed soil with varying thickness at the upper layer.Keywords: 2D geoelectric, aquifer, potential groundwater, Geostech  ABSTRAKGedung Geostech sebagai sarana perkantoran dan laboratorium memerlukan sumber air bersih dari air tanah terkait dengan terbatasnya suplai air bersih dari PDAM. Kebutuhan air bersih berasal dari air tanah, maka diperlukan data dan informasi mengenai kondisi potensi air tanah di kawasan tersebut termasuk konfigurasi akuifer, kedalaman, dan potensi air tanahnya. Keberadaan air tanah tidaklah merata untuk setiap tempat dan sangat terkait dengan kondisi geologi dan geohidrologinya. Salah satu metode geofisika yang dapat memberikan gambaran kondisi bawah permukaan adalah dengan metode geolistrik 2D. Metode ini dapat membedakan dan menganalisis jenis batuan, struktur geologi, akuifer air tanah, dan informasi penting lainnya berdasarkan sifat kelistrikan batuan dengan melihat nilai tahanan jenisnya. Dalam pengukuran ini digunakan konfigurasi Wenner Alpha, dimana susunan elektroda arus A dan B dan elektroda potensial M dan N mempunyai spasi yang konstan. Dari hasil pengukuran dapat diinterpretasikan adanya lapisan dengan resistivitas rendah yang mengandung air tanah dan bersifat porous sebagai akuifer. Berdasarkan data geologi regional diperkirakan lapisan ini berupa tuf pasiran (0-1,5 ohm-m). Pengambilan air tanah dengan pemboran diperkirakan akan mengenai batas atas lapisan akuifer pada kedalaman 11,5-13 meter. Ketebalan akuifer air tanah tidak bisa dihitung karena penetrasi kedalaman pengukuran geolistrik 2D terbatasi oleh bentangan elektroda di permukaan. Lapisan di atas akuifer merupakan lapisan selang-seling tuf halus dan tuf sedang yang kedap air, tuf kasar, dan pada bagian paling atas merupakan tanah urugan dengan ketebalan bervariasi.Kata kunci: Geolistrik 2D, akuifer, potensi air tanah, Geostech  

Sign in / Sign up

Export Citation Format

Share Document