The study of ionic and entanglements self‐healing behavior of zinc dimethacrylate enhanced natural rubber and natural rubber/butyl rubber composite

2021 ◽  
pp. 52048
Author(s):  
Ming Zhao ◽  
Hui Chen ◽  
Jiaxin Yuan ◽  
Yibo Wu ◽  
Shuxin Li ◽  
...  
Keyword(s):  
Natural Rubber ◽  
Butyl Rubber ◽  
Self Healing ◽  
Rubber Composite

Effect of carbon allotropes on foam formation, cure characteristics, mechanical and thermal properties of NRF/carbon composites

2020 ◽  
pp. 0021955X2097954
Author(s):  
Pollawat Charoeythornkhajhornchai ◽  
Wutthinun Khamloet ◽  
Pattharawun Nungjumnong
Keyword(s):  
Natural Rubber ◽  
Bubble Diameter ◽  
Carbon Composites ◽  
Mechanical And Thermal Properties ◽  
Foam Formation ◽  
Carbon Filler ◽  
Composite Foam ◽  
Carbon Allotropes ◽  
Blowing Agent ◽  
Rubber Composite

Natural rubber composite foam with carbon such as carbon black (CB), carbon synthesized from durian bark (CDB), graphite (GPT), graphene oxide (GO), graphene (GPE) and multi-walled carbon nanotubes (MWCNT) was studied in this work to investigate the relationship between foam formation during decomposition of chemical blowing agent mechanism and crosslink reaction of rubber molecules by sulphur. Natural rubber composite foam with carbon particle was set at 3 parts per hundred of rubber (phr) to observe the effect of carbon allotropes on foam formation with different microstructure and properties of natural rubber composite foam. The balancing of crosslink reaction by sulphur molecules during foam formation by the decomposition of chemical blowing agent affects the different morphology of natural rubber foam/carbon composites leading to the different mechanical and thermal properties. The result showed the fastest cure characteristics of natural rubber foam with 3 phr of graphene (NRF-GPE3) which was completely cure within 6.55 minutes (tc90) measured by moving die rheometer resulting in the smallest bubble diameter among other formulas. Moreover, natural rubber foam with 3 phr of MWCNT (NRF-MWCNT3) had the highest modulus (0.0035 ± 0.0005 N/m2) due to the small bubble size with high bulk density. In addition, natural rubber foam with 3 phr of GPT (NRF-GPT3) had the highest thermal expansion coefficient (282.12 ± 69 ppm/K) due to high amount of gas bubbles inside natural rubber foam matrix and natural rubber foam with 3 phr of GO (NRF-GO3) displayed the lowest thermal conductivity (0.0798 ± 0.0003 W/m.K) which was lower value than natural rubber foam without carbon filler (NRF). This might be caused by the effect of bubble diameter and bulk density as well as the defect on surface of graphene oxide compared to others carbon filler.

scholarly journals Combination of Self-Healing Butyl Rubber and Natural Rubber Composites for Improving the Stability

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 443
Author(s):  
Kunakorn Chumnum ◽  
Ekwipoo Kalkornsurapranee ◽  
Jobish Johns ◽  
Karnda Sengloyluan ◽  
Yeampon Nakaramontri
Keyword(s):  
Natural Rubber ◽  
Dynamic Mechanical Properties ◽  
Attenuated Total Reflection ◽  
Rubber Matrix ◽  
Self Healing ◽  
Mechanical And Electrical Properties ◽  
Natural Rubber Composites ◽  
Tan Δ ◽  
The Stability ◽  
Physical And Chemical

The self-healing composites were prepared from the combination of bromobutyl rubber (BIIR) and natural rubber (NR) blends filled with carbon nanotubes (CNT) and carbon black (CB). To reach the optimized self-healing propagation, the BIIR was modified with ionic liquid (IL) and butylimidazole (IM), and blended with NR using the ratios of 70:30 and 80:20 BIIR:NR. Physical and chemical modifications were confirmed from the mixing torque and attenuated total reflection-fourier transform infrared spectroscopy (ATR-FTIR). It was found that the BIIR/NR-CNTCB with IL and IM effectively improved the cure properties with enhanced tensile properties relative to pure BIIR/NR blends. For the healed composites, BIIR/NR-CNTCB-IM exhibited superior mechanical and electrical properties due to the existing ionic linkages in rubber matrix. For the abrasion resistances, puncture stress and electrical recyclability were examined to know the possibility of inner liner applications and Taber abrasion with dynamic mechanical properties were elucidated for tire tread applications. Based on the obtained Tg and Tan δ values, the composites are proposed for tire applications in the future with a simplified preparation procedure.

Solar reflectance, surface adhesion, and thermal conductivity of wood/natural rubber composite sheet with Tio2/polyurethane topcoat for roofing applications

2012 ◽  
Vol 18 (3) ◽  
pp. 184-191 ◽  
Author(s):  
Natita Hamaviriyapornwattana ◽  
Narongrit Sombatsompop ◽  
Teerasak Markpin ◽  
Apisit Kositchaiyong ◽  
Ekachai Wimolmala
Keyword(s):  
Thermal Conductivity ◽  
Natural Rubber ◽  
Surface Adhesion ◽  
Composite Sheet ◽  
Solar Reflectance ◽  
Rubber Composite

Electromechanical-Conductive Natural Rubber Doped Eggshell and Eggshell Membrane for Drug Delivery and Actuator Applications

2018 ◽  
Vol 934 ◽  
pp. 43-49
Author(s):  
Poramin Boonprasert ◽  
Nuchnapa Tangboriboon
Keyword(s):  
Composite Materials ◽  
Natural Rubber ◽  
Artificial Muscle ◽  
Eggshell Membrane ◽  
Curing Time ◽  
Electrical Field ◽  
Fibrous Protein ◽  
Rubber Composite ◽  
Field Response ◽  
Biomimetic Actuator

Natural rubber composite materials were prepared by using sulfur curing system of STR 5L added with hen eggshell and eggshell membrane to increase electrical and mechanical properties for biomimetic actuator and artificial muscle applications. Samples were vulcanized at temperature 150°C. Hen eggshells and eggshell membrane powder (0, 20, 40, and 60 phr) were added into natural rubber. The main composition of hen eggshells composed of 96.35 wt% calcium carbonate (CaCO3) while mostly composition of hen eggshell membrane is fibrous protein in terms of collagen. The best condition is addition of eggshell 40 phr (formula 3) and eggshell membrane 20 phr (formula 5) to obtain the highest storage modulus response equal to 2.85 x 106 and 2.97 x106 Pa, respectively. The curing time (Tc90) of pure natural rubber (formula 1), formula 3, and formula 5 are 8.22, 6.73, and 5.67 min, respectively. Furthermore, the curing time, rheology, and electrical field response of natural rubber composite materials were measured by moving die rheometer and impedance analyzer, and reported here.

scholarly journals Self-healing properties of carbon nanotube filled natural rubber/bromobutyl rubber blends

2017 ◽  
Vol 11 (3) ◽  
pp. 230-242 ◽  
Author(s):  
H. H. Le ◽  
S. Hait ◽  
A. Das ◽  
S. Wiessner ◽  
K. W. Stoeckelhuber ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Natural Rubber ◽  
Self Healing ◽  
Rubber Blends
Sign in / Sign up

Export Citation Format

Share Document