Positive effect of the addition of polyaniline on the anticorrosive property of polyethersulfone two‐layer composite coating

2021 ◽  
pp. 50758
Author(s):  
Hongyue Wang ◽  
Shiyang Zhu ◽  
Hongyan Yao ◽  
Yizeng Di ◽  
Meng Shu ◽  
...  
Keyword(s):  
Composite Coating ◽  
Anticorrosive Property ◽  
Layer Composite ◽  
Positive Effect

SHELL MATERIAL'S PERFORMANCE OF THE MICROCAPSULE FOR ELECTROLYTIC CO-DEPOSITION

2010 ◽  
Vol 24 (15n16) ◽  
pp. 3124-3130 ◽  
Author(s):  
HUI CONG LIU ◽  
XIU QING XU ◽  
WEI PING LI ◽  
YAN HONG GUO ◽  
LI-QUN ZHU
Keyword(s):  
Composite Coating ◽  
Methyl Cellulose ◽  
Water Vapor Permeability ◽  
Core Material ◽  
Vapor Permeability ◽  
Shell Material ◽  
The Core ◽  
Surface Performance ◽  
The Stability ◽  
Positive Effect

The shell material of microcapsules has an important effect on the electrolytic co-deposition behavior, the release of core material and the surface performance of composite coating. This paper discussed the tensile property and the stability of three shell materials including polyvinyl alcohol (PVA), gelatin and methyl cellulose (MC). It is found that these three shell materials have good mechanical strength and flexibility which are favorable to electrolytic co-deposition and stability of microcapsules in composite coating and that MC has well permeability and porosity which has a positive effect on the release of the core material in composite coating. Moreover, the study of the thermal properties and water vapor permeability of the three shell materials showed that their permeability improved with increase of temperature and humidity. In addition, the composite copper coating containing microcapsules with PVA, gelatin or MC as shell material was prepared respectively.

Numerical Simulation of Temperature Field on Different Surface Structure of Bicycle Brake Pairs

2014 ◽  
Vol 697 ◽  
pp. 235-238
Author(s):  
Gang Wu ◽  
Can Chao Huang ◽  
Hong Ling Qin ◽  
Chun Hua Zhao
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Surface Structure ◽  
Surface Structures ◽  
Temperature Fields ◽  
Transfer Model ◽  
Pair Model ◽  
Layer Composite ◽  
Positive Effect ◽  
Heat Loads

Using the basic principle of heat transfer, tribology and numerical simulation, a two-dimensional heat transfer model of the three-layer composite brake pair materials were established. The temperature fields of brake pairs during the process of friction were analyzed. Applied given heat loads at different time node on the brake pair model, the temperatures of different bicycle brake pairs were compared and analyzed. Results show that the improved surface structures of brake pair have positive effect on decreasing the temperature of contact areas than that of ordinary surface structure.

About Determing the Microhardness of Composite Coatings

2021 ◽  
Vol 1037 ◽  
pp. 486-493
Author(s):  
Sergey Y. Zhachkin ◽  
Anatoly I. Zavrazhnov ◽  
Nikita A. Penkov ◽  
George V. Kudryavtsev ◽  
Paul V. Tsisarenko
Keyword(s):  
Composite Coating ◽  
Mechanical Treatment ◽  
Composite Coatings ◽  
Operational Parameters ◽  
Deposition Parameters ◽  
Cylinder Liners ◽  
High Degree ◽  
Applied Coating ◽  
Positive Effect ◽  
Selection Of

One of the fundamental tasks in restoring the operability of cylinder liners is the application of a composite coating with a predetermined microhardness value. The authors have developed a technology for applying composite coatings based on iron on cylindrical surfaces, which makes it possible to vary the physical, mechanical and operational parameters of the formed iron-containing coating due to the planned selection of the deposition parameters. This eliminates the need for mechanical treatment of the applied coating, which is the reason for the high degree of rejection parts that undergo the iron-on operation. Contact interaction of the working tool with the formed layer of the composite coating has a positive effect on the value of its roughness.

Bioactive Composite Coating on Titanium Implants for Hard Tissue Repair

2007 ◽  
Vol 334-335 ◽  
pp. 1249-1252 ◽  
Author(s):  
Jin Ming Wu ◽  
Min Wang ◽  
Akiyoshi Osaka
Keyword(s):  
Composite Coating ◽  
Low Temperatures ◽  
Tissue Repair ◽  
Body Fluid ◽  
Titanium Implants ◽  
Apatite Formation ◽  
Hard Tissue ◽  
Layer Composite ◽  
Titania Layer ◽  
Hydrolysis Of

A bioactive composite coating consisting of one layer of titania and one layer of apatite was formed on Ti substrate. The first layer of crystalline titania was deposited on Ti at low temperatures either through oxidation of Ti by hydrogen peroxide solution or through hydrolysis of TiF4 or TiCl4 solution. It was shown that the crystalline titania, either in the form of anatase or rutile, induced formation of the second layer of apatite in a simulated body fluid. However, the trace elements in the titania layer affected greatly apatite formation. The Cl incorporated in the titania layer did not hinder apatite formation while F did. The two-layer composite coating should enhance bonding of Ti implants to bone tissue.

scholarly journals E-glass Coated Fibers in Novel Composite System for Constructional Applications

2021 ◽  
Vol 10 (8) ◽  
pp. 111-113
Author(s):  
Shouresh Safaei
Keyword(s):  
Glass Fiber ◽  
Composite Coating ◽  
High Performance ◽  
Glass Fibers ◽  
Reinforce Concrete ◽  
Sem Images ◽  
Cementitious Matrix ◽  
Pull Out ◽  
Polar Groups ◽  
Layer Composite

Concrete is one of the most applicable materials in construction. But it needs to reinforce with several reinforcement materials especially high performance fibers such as glass fibers to improve its properties. Among glass fibers, E-glass fiber has lower price but degrade in alkaline cementitious matrix. In this investigation for prohibition of E-glass fibers degradation along with better adhesion of E-glass fibers to cementitious matrix a doubled layer composite coating has been used. The first layer is a polysiloxane which it's permeability to water is too low so prevent alkali attack on E-glass fiber. The second layer is polyvinyl acetate (PVAC) having polar groups of acetate, produce calcium acetate in cementitious matrix, which stick firmly to cement. PVAC in alkaline solution can produce polyvinyl alcohol (PVA) which is again sticky to cement. This composite coating applied on E-glass fibers and used to reinforce concrete. The durability of coated fibers was investigated by alkaline stability test and SEM images. Meanwhile for studying adhesion of fibers to concrete pull out characteristics of coated fibers been investigated and compared with bare E-glass reinforced concrete.

Microstructure and Corrosion Behaviour of Laser-Clad Double-Ceramic-Layer Composite Coating

2016 ◽  
Vol 680 ◽  
pp. 252-256
Author(s):  
Qian Lin Wu ◽  
Wen Ge Li ◽  
Li Hua Dong ◽  
Yan Sheng Yin
Keyword(s):  
Corrosion Resistance ◽  
Composite Coating ◽  
Double Layer ◽  
Pitting Corrosion ◽  
Outer Layer ◽  
Corrosion Behaviour ◽  
Steel Substrate ◽  
Metal Dusting ◽  
Layer Composite

A double-layer composite coating on Q235 steel substrate was prepared using a new developed in situ technology consisting of SHS reaction, laser cladding and metal dusting techniques. A double-layer composite coating consists of the TiO2–TiC ceramic outer layer and the TiC-CNTs cermet inner layer. An excellent bonding was observed among the outer layer, the inner layer and the steel substrate. Corrosion behavior of the coating was investigated and the commercial 304SS was used for comparison. The outer layer exhibited the highest corrosion resistance and 304SS the lowest corrosion resistance, whereas the inner coating exhibited the intermediate corrosion resistance. However, the severe pitting corrosion which was observed in 304SS did not exist for the coating.

scholarly journals Micrographic Properties of Composite Coatings Prepared on TA2 Substrate by Hot-Dipping in Al–Si Alloy and Using Micro-Arc Oxidation Technologies (MAO)

Coatings ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 374
Author(s):  
Shaopeng Wang ◽  
Lian Zhou ◽  
Changjiu Li ◽  
Zhengxian Li ◽  
Hongzhan Li ◽  
...  
Keyword(s):  
Composite Coating ◽  
Diffusion Layer ◽  
Composite Coatings ◽  
Alloy Layer ◽  
Ceramic Layer ◽  
Oxide Ceramic ◽  
X Ray ◽  
Layer Composite ◽  
Micro Arc Oxidation

A composite coating composed of intermetallic compounds, Al–Si alloys, and an oxide ceramic layer was prepared on TA2 substrate by hot-dipping Al–Si alloy and micro-arc oxidation (MAO) methods. The microstructure and composition distribution of the resulting hot-dipped Al–Si alloy layer and MAO-caused ceramic layer were studied by scanning electron microscope (SEM) and energy dispersive spectrum (EDS). In addition, the phase composition of the diffusion layer obtained by the Al–Si alloy hot-dipping procedure was investigated by electron backscattered diffraction (EBSD), and the phase structure of the MAO-treated layer was studied by X-ray diffraction (XRD) analysis and X-ray photoelectron spectroscopy (XPS). The MAO method can make the hot-dipped Al–Si alloy layer in-situ oxidized to form a ceramic layer. Finally, a three-layer composite coating composed of a diffusion layer formed by the Ti–Al–Si interdiffusion, an Al–Si alloy layer and a ceramic layer was prepared on TA2 substrate. Compared with TA2 substrate, the TA2 sample with a three-layer composite coating has larger friction coefficient and less abrasion loss. The three-layer composite coating can significantly improve the wear resistance of TA2. A technical composite method was developed to the low cost in-situ growth of alumina-based ceramic wear-resistant coatings on TA2 substrate.

scholarly journals Microstructure of the coating obtained by magnetron sputtering of a Ni-Cr-B4C composite target

2021 ◽  
Vol 2124 (1) ◽  
pp. 012021
Author(s):  
S V Zaitsev ◽  
D S Prokhorenkov ◽  
M S Ageeva ◽  
A A Skiba
Keyword(s):  
Magnetron Sputtering ◽  
Composite Coating ◽  
Composite Coatings ◽  
Thermal Spraying ◽  
Rf Magnetron Sputtering ◽  
Columnar Structure ◽  
Columnar Crystal ◽  
Composite Target ◽  
Combined Use ◽  
Positive Effect

Abstract This paper presents data on obtaining a composite coating by radio frequency (RF) magnetron sputtering of a Ni-Cr-B4C composite target in an inert gas (argon) environment. To make the target, Ni-Cr-B4C composite powder was applied to the copper base of the target by detonation gas-thermal spraying. The obtained targets served as a source of coating material during high-frequency magnetron sputtering. This method of coating production ensures the reproducibility of their properties, as well as the uniformity of coating thickness and good adhesion to various target backings. The data of the study of the structure and morphology of the composite coating are presented. The resulting composite coating Ni-B/Cr7C3 with a thickness of 2 microns has a dense homogeneous structure with expressed textured polycrystallinity. The surface of the resulting coating is represented by nanoscale and homogeneous grains. There is no columnar crystal growth in the coating, which has a positive effect, as the columnar structure reduces the mechanical characteristics of the coatings due to faster oxygen diffusion along the grain boundaries. It is established that the combined use of the Ni-B and Cr7C3 binary phases in composite coatings leads to an increase in operational properties.

Sign in / Sign up

Export Citation Format

Share Document